No description available.

The main objectives of this thesis are to determine if the addition of an energy wheel in an HVAC system can improve the indoor air relative humidity (RH), and perceived air quality (PAQ), as well as reduce energy consumption. An energy wheel is an air-to-air energy exchanger that transfers heat and moisture between the outdoor air entering and the exhaust air leaving a building. This thesis uses the TRNSYS computer package to model two buildings (an office and a school) in four different cities (Saskatoon, Saskatchewan; Vancouver, British Columbia; Tampa, Florida and Phoenix, Arizona).<p>The results with and without an energy wheel are compared to see if the energy wheel has a significant impact on the RH and PAQ in the buildings. The energy wheel reduces peak RH levels in Tampa, (up to 15% RH), which is a humid climate, but has a smaller effect on the indoor RH in Saskatoon (up to 4% RH) and Phoenix (up to 11% RH), which are dry climates. The energy wheel also reduces the number of people that are dissatisfied with the PAQ within the space by up to 17% in Tampa. <p>The addition of the energy wheel to the HVAC system creates a reduction in the total energy consumed by the HVAC system in Saskatoon, Phoenix and Tampa (2% in each city). There is a significant reduction in the size of the heating equipment in Saskatoon (26%) and in the size of the cooling equipment in Phoenix (18%) and Tampa (17%). A cost analysis shows that the HVAC system including an energy wheel has the least life-cycle costs in these three cities, with savings of up to 6%. In Vancouver, the energy wheel has a negligible impact on the indoor RH, PAQ and energy consumption.

The main objectives of this thesis are to determine if the addition of an energy wheel in an HVAC system can improve the indoor air relative humidity (RH), and perceived air quality (PAQ), as well as reduce energy consumption. An energy wheel is an air-to-air energy exchanger that transfers heat and moisture between the outdoor air entering and the exhaust air leaving a building. This thesis uses the TRNSYS computer package to model two buildings (an office and a school) in four different cities (Saskatoon, Saskatchewan; Vancouver, British Columbia; Tampa, Florida and Phoenix, Arizona).<p>The results with and without an energy wheel are compared to see if the energy wheel has a significant impact on the RH and PAQ in the buildings. The energy wheel reduces peak RH levels in Tampa, (up to 15% RH), which is a humid climate, but has a smaller effect on the indoor RH in Saskatoon (up to 4% RH) and Phoenix (up to 11% RH), which are dry climates. The energy wheel also reduces the number of people that are dissatisfied with the PAQ within the space by up to 17% in Tampa. <p>The addition of the energy wheel to the HVAC system creates a reduction in the total energy consumed by the HVAC system in Saskatoon, Phoenix and Tampa (2% in each city). There is a significant reduction in the size of the heating equipment in Saskatoon (26%) and in the size of the cooling equipment in Phoenix (18%) and Tampa (17%). A cost analysis shows that the HVAC system including an energy wheel has the least life-cycle costs in these three cities, with savings of up to 6%. In Vancouver, the energy wheel has a negligible impact on the indoor RH, PAQ and energy consumption.

This thesis has improved Baltazar's methodology for potential energy savings estimation from retro-commissioning/retrofits measures. Important improvements and discussions are made on optimization parameters, limits on optimization parameter values, minimum airflow setting for VAV systems, space load calculation, simulation of buildings with more than one type of system, AHU shutdown simulation, and air-side simulation models. A prototype computer tool called the Potential Energy Savings Estimation (PESE) Toolkit is developed to implement the improved methodology and used for testing. The implemented methodology is tested in two retro-commissioned on-campus buildings with hourly measured consumption data. In the Sanders Corps of Cadets Center, the optimized profiles of parameter settings in single parameter optimizations can be explained with engineering principles. It reveals that the improved methodology is implemented correctly in the tool. The case study on the Coke Building shows that the improved methodology can be used in buildings with more than one system type. The methodology is then used to estimate annual potential energy cost savings for 14 office buildings in Austin, TX with very limited information and utility bills. The methodology has predicted an average total potential savings of 36% for SDVAV systems with electric terminal reheat, 22% for SDVAV systems with hot water reheat, and 25% for DDVAV systems. The estimations are compared with savings predicted in the Continuous Commissioning assessment report. The results show it may be helpful to study the correlation by using generalized factors of assessment predicted energy cost savings to estimated potential energy cost savings. The factors identified in this application are 0.68, 0.66, and 0.61 for each type of system. It is noted that one should be cautious in quoting these factors in future projects. In the future, it would be valuable to study the correlation between measured savings and estimated potential savings in a large number of buildings with retrocommissioning measures implemented. Additionally, further testing and modifications on the PESE Toolkit are necessary to make it a reliable software tool.

In 2011 South Africa's main electricity supplier, Eskom, experienced a peak electricity demand of 89% of their total installed generation capacity. The high utilisation rate makes it difficult to perform essential maintenance on the system. Eskom implements Demand-Side Management (DSM) projects in various industries, in order to reduce the demand and to ensure sustainable electricity supply. The mining sector consumes 14.5% of the total amount of electricity generated by Eskom. Mine compressed air systems can consume as much as 40% of a mine's total electricity requirements. This makes mine compressed air systems an ideal target for DSM. Electricity load seems to be reduced, but many DSM savings are not sustained throughout the project lifetime. An existing project feedback method of a specific Energy Services Company (ESCo) includes the manual collection of data from the mines and manual generation of reports. These reports show energy savings of the DSM projects to help the ESCo and their clients to improve and sustain the performance of the projects. A great amount of man-hours is used which results in large time delays in the feedback-loop. In order to address this, the need for a new automatic feedback reporting system was identified. This study mainly focusses on the development and implementation of a new method to monitor DSM savings on mine compressed air systems. It includes the reliable collection of data from mines, processing and storing of the data in a central database and generating savings reports. This is done automatically on a daily basis. In order to complete the feedback-loop, the reports are verified and emailed to clients and ESCo personnel on a daily basis. The new reporting system is implemented at a number of mines. Four of these project implementations are used as case studies to measure and interpret the effectiveness and value of this system. It saves a significant amount of man-hours and proves to be of great value in the sustainability of DSM project savings. Both Eskom and mining companies benefit from the efficient monitoring of mine compressed air savings. / Thesis (MIng (Computer and Electronic Engineering))--North-West University, Potchefstroom Campus, 2013.

The increasing electricity demand in South Africa has lead to a shortage in electricity supply. In response to this problem Eskom has introduced multiple capacity expansion programs. Unfortunately the electricity shortage is expected to continue until Eskom’s capacity expansion programs are completed. Demand Side Management (DSM) is widely accepted as an immediate solution to the high electricity demand of South Africa. Numerous DSM projects implemented by ESCo’s have been successful, but over the years have not been sustainable. Without regular maintenance from the relevant ESCo, many projects have failed to achieve sustainable savings. After the implementation of DSM projects, all installed equipment and software becomes the property of the client. Experience has illustrated that some mines did not always have the expertise or available resources to monitor and maintain the projects. As a result the electrical energy savings of the project would gradually deteriorate. A feasibility study was conducted to determine whether the re-instatement of redundant and debilitated mine DSM projects could be marketed as the “low hanging fruit” of the industry. A key driver for this study, was the fact that costs involved for re-instatement of such DSM projects are generally considerably lower than those of new projects, yet still producing lucrative electricity savings. Three major mining entities discussed in this dissertation have neglected to realise a collaborative cost saving of R 55,5 Million per annum. This loss of opportunity can mainly be attributed to a lack of maintenance and monitoring of operational DSM projects on their mining sites. Three DSM projects related to the water reticulation system of the mine were investigated. It was discerned in all three cases that the successful re-instatement of DSM projects are indeed possible, but only when subjected to continuous monitoring. The maintenance performed on two of the three projects, respectively realised approximately R2,7 Million and R 750 000. This was achieved through the process of load shifting, over a period of one year. Maintenance on the third project realised approximately R1,5 Million through energy efficiency over a three month period. This dissertation illustrates that attractive savings in electricity and cost can be realised when re-instating redundant DSM projects in the mining industry. It also demonstrates the cost and time effectiveness of implementing such projects, compared to the focus on new DSM installations. / Thesis (MIng (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2013.

In 2011 South Africa's main electricity supplier, Eskom, experienced a peak electricity demand of 89% of their total installed generation capacity. The high utilisation rate makes it difficult to perform essential maintenance on the system. Eskom implements Demand-Side Management (DSM) projects in various industries, in order to reduce the demand and to ensure sustainable electricity supply. The mining sector consumes 14.5% of the total amount of electricity generated by Eskom. Mine compressed air systems can consume as much as 40% of a mine's total electricity requirements. This makes mine compressed air systems an ideal target for DSM. Electricity load seems to be reduced, but many DSM savings are not sustained throughout the project lifetime. An existing project feedback method of a specific Energy Services Company (ESCo) includes the manual collection of data from the mines and manual generation of reports. These reports show energy savings of the DSM projects to help the ESCo and their clients to improve and sustain the performance of the projects. A great amount of man-hours is used which results in large time delays in the feedback-loop. In order to address this, the need for a new automatic feedback reporting system was identified. This study mainly focusses on the development and implementation of a new method to monitor DSM savings on mine compressed air systems. It includes the reliable collection of data from mines, processing and storing of the data in a central database and generating savings reports. This is done automatically on a daily basis. In order to complete the feedback-loop, the reports are verified and emailed to clients and ESCo personnel on a daily basis. The new reporting system is implemented at a number of mines. Four of these project implementations are used as case studies to measure and interpret the effectiveness and value of this system. It saves a significant amount of man-hours and proves to be of great value in the sustainability of DSM project savings. Both Eskom and mining companies benefit from the efficient monitoring of mine compressed air savings. / Thesis (MIng (Computer and Electronic Engineering))--North-West University, Potchefstroom Campus, 2013.

The increasing electricity demand in South Africa has lead to a shortage in electricity supply. In response to this problem Eskom has introduced multiple capacity expansion programs. Unfortunately the electricity shortage is expected to continue until Eskom’s capacity expansion programs are completed. Demand Side Management (DSM) is widely accepted as an immediate solution to the high electricity demand of South Africa. Numerous DSM projects implemented by ESCo’s have been successful, but over the years have not been sustainable. Without regular maintenance from the relevant ESCo, many projects have failed to achieve sustainable savings. After the implementation of DSM projects, all installed equipment and software becomes the property of the client. Experience has illustrated that some mines did not always have the expertise or available resources to monitor and maintain the projects. As a result the electrical energy savings of the project would gradually deteriorate. A feasibility study was conducted to determine whether the re-instatement of redundant and debilitated mine DSM projects could be marketed as the “low hanging fruit” of the industry. A key driver for this study, was the fact that costs involved for re-instatement of such DSM projects are generally considerably lower than those of new projects, yet still producing lucrative electricity savings. Three major mining entities discussed in this dissertation have neglected to realise a collaborative cost saving of R 55,5 Million per annum. This loss of opportunity can mainly be attributed to a lack of maintenance and monitoring of operational DSM projects on their mining sites. Three DSM projects related to the water reticulation system of the mine were investigated. It was discerned in all three cases that the successful re-instatement of DSM projects are indeed possible, but only when subjected to continuous monitoring. The maintenance performed on two of the three projects, respectively realised approximately R2,7 Million and R 750 000. This was achieved through the process of load shifting, over a period of one year. Maintenance on the third project realised approximately R1,5 Million through energy efficiency over a three month period. This dissertation illustrates that attractive savings in electricity and cost can be realised when re-instating redundant DSM projects in the mining industry. It also demonstrates the cost and time effectiveness of implementing such projects, compared to the focus on new DSM installations. / Thesis (MIng (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2013.

Magister Artium - MA / According to Professor Muhammed Yunus, Nobel Prize winner in 2006 and the founder of the internationally acclaimed Grameen Bank in Bangladesh, microfinance is a viable solution to poverty alleviation among the poorest people residing in rural areas. Microfinance programs have led to poverty alleviation and empowerment of especially rural based women of developing societies, as they enable the poor to manage their finances and cope with unpredictable shocks and emergencies (Yunus, 2007). This research evaluated the developmental impact of microfinance on poverty alleviation and women empowerment. It assessed the impact of the existing microfinance programmes among the members of the three microfinance Savings and Credit Associations (SCAs) in the rural areas of the Caprivi region of Namibia. This study explored whether microfinance programs have helped their members to minimize financial vulnerability through diversification of income sources and accumulation of assets. The research employed both qualitative and quantitative research designs. Data were collected through different qualitative and quantitative techniques (in-depth individual interviews, faceto- face interviews, questionnaire and questionnaire schedule). Summary findings indicate that the SCAs has positively contributed to the socio-economic improvement in the living standards (contribution to livelihood – increased income, enhanced health, and food status), improved education/healthcare, women empowerment through micro enterprise training and skill development. However, SCAs are still struggling with challenges, such as lack of income, high default rates and unprofitable micro enterprises. This research makes several recommendations, including: MFIs should concentrate on women’s economic empowerment as their main aim, incentives should be provided to the MFIs to encourage savings and investment amongst the poor, and if microfinance is to be used as a promotional tool for credit and saving services for the poor, then the socio-economic consequences of micro-credit lending have to be re-investigated, especially when they negatively impact on poverty reduction.

The purpose of this study was to determine the economic and educational values of a banking program in a public school system. The program as employed in the city schools of Dallas, Texas, has been used as the subject for consideration.