No description available.

This thesis utilized pulse shaping and Gerberg-Saxton algorithm to develop high power tunable narrowband terahertz radiation and applications. By the way of using Freezing algorithm and Gerberg-Saxton, pulse width, pulse duration, pulse position and pulse number can be controlled. The pulse train can be pumping source of high power tunable narrowband terahertz radiation, by avoid the saturations and different pulse duration. The simulation shown the result can have 5GHz narrowband width closing to commercial product. Besides, we demonstrated the THz multi-wavelength interference method by using THz-TDS (terahertz time domain spectroscopy) to measure the liquid crystal cell gap. We have also used THz-TDS to investigate the complex optical constants and birefringence of cholesteric liquid crystal mixture BL006. The extraordinary (ne) and ordinary (no) indices of refraction at are 1.784-1.817 and 1.516-1.555 giving rise to a birefringence of 0.25¡V0.29 in 0.2THz~1.6THz.

One of the highest resolution astronomical images ever taken in the visible were obtained by combining the techniques of adaptive optics and lucky imaging. The Adaptive Optics Lucky Imager (AOLI), being developed at Cambridge as part of a European collaboration, combines these two techniques in a dedicated instrument for the first time. The instrument is designed initially for use on the 4.2m William Herschel Telescope (WHT) on the Canary Island of La Palma. This thesis describes the development of AOLI, in particular the adaptive optics system and a new type of wavefront sensor, the non-linear curvature wavefront sensor (nlCWFS), being used within the instrument. The development of the nlCWFS has been the focus of my work, bringing the technique from a theoretical concept to physical realisation at the WHT in September 2013. The non-linear curvature wavefront sensor is based on the technique employed in the conventional curvature wavefront sensor where two image planes are located equidistant either side of a pupil plane. Two pairs of images are employed in the nlCWFS providing increased sensitivity to both high- and low- order wavefront distortions. This sensitivity is the reason the nlCWFS was selected for use with AOLI as it will provide significant sky-coverage using natural guide stars alone, mitigating the need for laser guide stars. This thesis is structured into three main sections; the first introduces the non-linear curvature wavefront sensor, the relevant background and a discussion of simulations undertaken to investigate intrinsic effects. The iterative reconstruction algorithm required for wavefront reconstruction is also introduced. The second section discusses the practical implementation of the nlCWFS using two demonstration systems as the precursor to the optical design used at the WHT and includes details of subsequent design changes. The final section discusses data from both the WHT and a laboratory setup developed at Cambridge following the observing run. The long-term goal for AOLI is to undertake science observations on the 10.4m Gran Telescopio Canarias, the world's largest optical telescope. The combination of AO and lucky imaging, when used on this telescope, will provide resolutions a factor of two higher than ever before achieved at visible wavelengths. This offers the opportunity to probe the Cosmos in unprecedented detail and has the potential to significantly advance our understanding of the Universe.

Optical testing in adverse environments, ophthalmology and applications where characterization by curvature is leveraged all have a common goal: accurately estimate wavefront shape. This dissertation investigates wavefront sensing techniques as applied to optical testing based on gradient and curvature measurements. Wavefront sensing involves the ability to accurately estimate shape over any aperture geometry, which requires establishing a sampling grid and estimation scheme, quantifying estimation errors caused by measurement noise propagation, and designing an instrument with sufficient accuracy and sensitivity for the application. Starting with gradient-based wavefront sensing, a zonal least-squares wavefront estimation algorithm for any irregular pupil shape and size is presented, for which the normal matrix equation sets share a pre-defined matrix. A Gerchberg–Saxton iterative method is employed to reduce the deviation errors in the estimated wavefront caused by the pre-defined matrix across discontinuous boundary. The results show that the RMS deviation error of the estimated wavefront from the original wavefront can be less than λ/130~ λ/150 (for λ equals 632.8nm) after about twelve iterations and less than λ/100 after as few as four iterations. The presented approach to handling irregular pupil shapes applies equally well to wavefront estimation from curvature data. A defining characteristic for a wavefront estimation algorithm is its error propagation behavior. The error propagation coefficient can be formulated as a function of the eigenvalues of the wavefront estimation-related matrices, and such functions are established for each of the basic estimation geometries (i.e. Fried, Hudgin and Southwell) with a serial numbering scheme, where a square sampling grid array is sequentially indexed row by row. The results show that with the wavefront piston-value fixed, the odd-number grid sizes yield lower error propagation than the even-number grid sizes for all geometries. The Fried geometry either allows sub-sized wavefront estimations within the testing domain or yields a two-rank deficient estimation matrix over the full aperture; but the latter usually suffers from high error propagation and the waffle mode problem. Hudgin geometry offers an error propagator between those of the Southwell and the Fried geometries. For both wavefront gradient-based and wavefront difference-based estimations, the Southwell geometry is shown to offer the lowest error propagation with the minimum-norm least-squares solution. Noll’s theoretical result, which was extensively used as a reference in the previous literature for error propagation estimate, corresponds to the Southwell geometry with an odd-number grid size. For curvature-based wavefront sensing, a concept for a differential Shack-Hartmann (DSH) curvature sensor is proposed. This curvature sensor is derived from the basic Shack-Hartmann sensor with the collimated beam split into three output channels, along each of which a lenslet array is located. Three Hartmann grid arrays are generated by three lenslet arrays. Two of the lenslets shear in two perpendicular directions relative to the third one. By quantitatively comparing the Shack-Hartmann grid coordinates of the three channels, the differentials of the wavefront slope at each Shack-Hartmann grid point can be obtained, so the Laplacian curvatures and twist terms will be available. The acquisition of the twist terms using a Hartmann-based sensor allows us to uniquely determine the principal curvatures and directions more accurately than prior methods. Measurement of local curvatures as opposed to slopes is unique because curvature is intrinsic to the wavefront under test, and it is an absolute as opposed to a relative measurement. A zonal least-squares-based wavefront estimation algorithm was developed to estimate the wavefront shape from the Laplacian curvature data, and validated. An implementation of the DSH curvature sensor is proposed and an experimental system for this implementation was initiated. The DSH curvature sensor shares the important features of both the Shack-Hartmann slope sensor and Roddier’s curvature sensor. It is a two-dimensional parallel curvature sensor. Because it is a curvature sensor, it provides absolute measurements which are thus insensitive to vibrations, tip/tilts, and whole body movements. Because it is a two-dimensional sensor, it does not suffer from other sources of errors, such as scanning noise. Combined with sufficient sampling and a zonal wavefront estimation algorithm, both low and mid frequencies of the wavefront may be recovered. Notice that the DSH curvature sensor operates at the pupil of the system under test, therefore the difficulty associated with operation close to the caustic zone is avoided. Finally, the DSH-curvature-sensor-based wavefront estimation does not suffer from the 2π-ambiguity problem, so potentially both small and large aberrations may be measured.

This thesis examines 'improvement' of wetland commons in early modern England as a contested process of rapid environmental change. As a flagship project of agrarian improvement, drainage sought to alchemise pastoral fen commons into arable enclosed terra firma and promised manifold benefits for crown, commoners, and commonwealth alike. In practice, however, improvement schemes generated friction between the political and fiscal agendas of governors and projectors and local communities' customary ways of knowing and using wetland commons, provoking the most sustained and violent agrarian unrest of the seventeenth century. This thesis situates the first state-led drainage project in England, in the northern fens of Hatfield Level, in the context of the local politics of custom, national legal and political developments, and international movements of capital, expertise, and refugees; all of which intersected to reshape perceptions and management of English wetlands. Drawing on the analytic perspectives of environmental history, this thesis explores divergent ideas and practices generating conflict over the making of private property, reorganisation of flow, and reconfiguration of lived environments. This thesis argues that different 'environing' practices - both mental and material - distinguished what was seen as an ordered or disordered landscape, determined when and how water was understood as a resource or risk, and demarcated different scales and forms of intervention. Rival visions of the fenscape, ways of knowing land and water, and concepts of value and justice were productive of, and produced by, different practices of management, ownership, and use. Drainage disputes therefore crossed different spheres of discourse and action, spanning parliament, courtroom, and commons to bring improvement into dialogue with fen custom and generate a contentious environmental politics. In seven substantive chapters, this thesis investigates how improvement was imagined, legitimised, and enacted; how fen communities experienced and navigated rapid environmental transformation; and how political, social, and spatial boundaries were reforged in the process. By grounding improvement in the early modern fenscape, this thesis reintegrates agency into accounts of inexorable socio-economic change, illuminates ideas at work in social contexts, and deepens understandings of environmental conflict.