Purpose: This degree project aims to study how different choices regarding the size, location and type of windows affect daylight entry in an apartment building in Västerås. We have chosen to calculate the energy requirement when changing the window type, size and shielding factor. The purpose is also to come up with solution proposals that balance daylight input and energy for a smaller energy need in the apartment building. Method: The research method is based on a literature study that will lay the foundation for the work and a case study where a visit to the concerned building has been carried out. Interviews have also been conducted with experts in daylight and energy issues. Energy calculations and daylight- related calculations have also been made using the computer program Daylight Visualizer. The goal of the program is to find out the value of the daylight factor in two different apartments on two different floors. In each apartment, three different rooms in three different latitudes (north, west, and south) have been studied. Results: The results present several factors that affect daylight intake. These are screening angles, orientation, room height, room depth, building structure and placement of balconies. The properties of the windows in terms of daylight transmittance (LT value) and solar heat gain (g value) are very important to get a good result regarding both daylight and heat in the building. The balance between daylight and solar heat gain to reducing the energy needs for heating during the winter and cooling during the summer. The result based on the computer program for the first window alternative show that that the value of the daylight factor in all three rooms on the 12th floor (third floor) was between 0.59–0.31% and on the 19th floor (tenth floor) 1.01– 0.91%. The calculations of the energy balance show as monthly results, and the calculated annual need for active heating is about 27 MWh / year. The corresponding result according to calculations by the consulting company Kadesjös is approximately 59 MWh / year, but the difference between its calculations has not been studied further in this degree project. Conclusions: The calculation results indicate that the building has a very limited energy requirement for active heating in relation to its size and this is logical given that the heat losses are relatively small in terms of transmission, Exhaust and supply air ventilation with heat recovery (FTX system), and air leakage. The heat losses through window glazing in this case constitute to only about 12% of the building's total heat losses.

The aim of master's thesis is to find an optimal solution in terms of window shielding factors in shaping the internal environment in the interior. In therms of this work there was used a computer program Teruna to created mathematical model entered the room in the experimental section. The theoretical part inquires into the theory of the internal environment. The project inquires into the design and application of a mathematical model of two variants room office in the premises of the factory building.

This diploma thesis deals with the optimization of microclimate of an industrial building. There is required constant temperature with minimal fluctuations during manufacturing process in the building. Due to insufficient cooling power of air-conditioning system was objective to design a solution that ensures stability of internal temperature during production especially in summer and simultaneously should be the solution economically acceptable. Simulation shows original state defined problems. Some new or unusual materials for solar shading are reviewed in the thesis by the experimental measurements and by the comparative method. To each material is assigned shading coefficient according to Czech standards, thereby is achieved universality for calculations of heat gains resulting from solar radiation. By one part of the experiments and their evaluation is determined thickness of the standard single glass glazing. It is also determined proportional transmittance of solar radiation for certain multiwall polycarbonates, which are currently used as fillers of industrial skylights and production hall‘s window openings. From experiments resulting design is subjected to the simulation. Comparison of temperatures is shown for the time before the installation of designed solar shading and after the installation of the solar shading.

This work deals with the issue of shading coefficient of external blindsand its dependence on environmental phenomena. The aim of the thesis is to find an optimal solution for forming of inner environment according to the shading coefficient of external blinds shading element. The computer software of Teruna for creating a mathematic simulation of rooms in the assigned detached family house. The conclusion contains the recommendation of building alterations for the detached family house which I designed in my bachelor´s thesis.

This master thesis deals with the influence of glazing on the microclimate inside buildings. In particular, I focused on the shading coefficient and the various factors that affect it. The thesis also concentrates on the origin and composition of the solar radiation, the formation of thermal stress and refraction. In the next part of the thesis, I focused on designing two variants of shielding factor and its impact on the thermal load of gym, sports hall and the related necessary changes. The last part of the thesis deals with experimental measurements of incident solar radiation passing through the window into real physical model. From the measured values, we determined realistic shading coefficient and then applied it in the previous section of this thesis.