The territory lies in the City of Brno, in the urban district of Zábrdovice. From the east it is demarcated by the Svitava River, from the south by the Cejl Street, and from the west by the Jan Svoboda Street. Its area is approximately 18,790 m2. From the standpoint of urban planning¸ the intensive house is a separate city block, which is, nevertheless, open in the eastern direction towards the Svitava River, thus communicating with the embankment. In the other direction there is both private and semi-private space inside the block as a relaxation green “garden” in several levels. The mass of the object links up in the prolonged line with the existing neighbouring blocks and thus respects the integrity of the territory. Intensive use of the territory consists in the achievement of high density of built-up area, and at the same time preserving the surroundings of quality for life and habitation. Functions are mixed here and a city of short distances is created here with nearly excluded traffic. In order to achieve such intensity, space urbanism is employed. The principle consists in a simple linear form of masses respecting the shape of the lot, which is vivified with an ellipsoid located in the courtyard, which is an accent towards the linear form. The ellipsoid serves as a small cultural and exhibition centre, at the same time connecting all the arms of the defining block and bringing daylight to the first floor. The block is open in the direction to the river and its half-public space is connected with the embankment with a staircase and verdure. Verdure is also made use of on the roofs. The defining mass is perforated, thus creating covered terraces. The principal architectonic intention was to create an integrated structure, where a significant role is played by the introduction of nature and polyfunctionality to the whole territory, thus increasing its attractivity. From the dispositional perspective the individual functions interpenetrate at al

Project of master thesis solves brand new residential polyfunctional house with bike shop. The main object is a four-storyed, designed as a monolithic skeleton construction. The building is located in Opuštěná Street, Brno. The project is developed on the basis of project documentation and technical data, delivered by the designer in the behalf of investor requirements. Main goal of this project seeks to approach to real solution of the construction site. It is very important to compare also financial aspects, not only the technological. Last but not least, time requirements of construction plan and factual requirements of the customer. Constructive-technological project contains especially: technical report, site facilities, technologic regulation, schedule, financial budget, control and test plan, design of machinery, safety and health protection etc.

This thesis addresses the new building of the municipal library on 3 floors. Operation of library is divided into public and private part. On the first floor there are dressing rooms, technical facilities, training rooms and spaces for commercial uses, such as a cafe and stationery. Storage spaces of library are using all floors and they are located in a separate wing. The main interest of readers is placed into the second and third floor, there are also offices to ensure the operation of the library. All floors are equipped with sanitary facilities for each building operation. The building is covered with flat roof.

The thesis deals with a new hotel construction in Brno. The paper aims to elaborate a project documentation for the construction of the building. It is a detached building in a slightly sloping terrain. The building has three floors and one underground floor. On the underground floor there are jointly-shared garages and technical background of the hotel. On the first floor there is a reception, a restaurant, a café and an open-air terrace. The second and the third floor is designed to accommodate guests in double rooms and suites. There is also a manager´s office and a conference room. The bearing construction consists of a ferroconcrete skeleton with a bricked outside envelope of aerated concrete blocks Ytong. The skeletal construction is built on a monolithic foundation footings. The building is covered in a flat single-coat roof which is partly designed as a vegetation roof. The facade of the building is glazed in the northern part of the 1st floor and some parts of the facade are coloured green, the others are of various colours. The building is insulated with a contact insulation system.

Subject of this diploma thesis is construction technology project of reconstruction of object A1, faculty of mechanical engineering, BUT in Brno. This diploma thesis contains technical report of construction site, construction site equipment project, time and financial plan, budget of one building object, technological study of the major technology stages, design of mechanical equipment, technological specifications and quality controlling inspections.

The aim of this master thesis is to design a low-energy building for civic amenities, specifically the design of a recreational wellness centre. The building has an L-shaped floor plan with a flat roof and is designed with two above ground and one underground floor. The ground floor will serve as a wellness centre with a swimming pool and saunas. Massages and solariums are proposed on the 2nd floor. Technical facilities are located in the basement. The first part of the thesis is devoted to the architectural and structural design. Structurally, the building is divided into two parts. The part of the administrative facilities and the massage rooms consists of a construction of the character of a transverse wall system made of cut brick blocks and insulated with ETICS. The internal masonry is designed in ceramic ground bricks. Ceiling structures are in the form of continuous reinforced concrete slab. The building is based on footings and waist foundations. The roof of the building is single-skin flat with a gravel. The wellness part is made up of a monolithic diaphragm skeleton with high slenderness columns. The horizontal load-bearing structure in this case again consists of a continuous monolithic reinforced concrete slab. The second part of the thesis deals mainly with the environmental engineering of the buildings. The building will be heated by a pellet boiler and will also use energy from photovoltaic panels. Ventilation in the building is provided by air handling units with heat recovery. The third part of the thesis deals with the assessment of solar gains in the indoor environment of the pool hall. Three variants are proposed with multi-criteria evaluation and the optimal option is selected. The thesis is mainly elaborated in Archicad, Deksoft, MS Excel and Word software.

My diploma project is the proposed building of the main grandstand and head office Grand Prix Brno. The building is located near Ostrovačice and Brno-Žebětín. It is a two-floor building consisting of steel structure and five-floor reinforced concrete frame construction. Fundamentals are the foundation footings and passports.

The assigned territory is situated in the City of Brno, in the city district of Židenice. From the west it is limited by the railway track Brno-Židenice, from the east by Koperníkova Street, from the north by Lazaretní Street and finally from the south by Bubeníčkova Street. Its area is approximately 45, 480 m2 which is 4,55 ha. From the urban perspective it is an intensive development in a separated block of the city with a protection zone. Total area is permeated by a few lines for pedestrians. The pedestrian zone provides better permeability of the area and better accessibility of the trade parterre. The buildings connect to surrounding development and respect the density of the integrity of the area. Intensive housing structure is regarded as "the city of short distance". The achievement of high density of housing development combines lots of various functions and relatively small built-up surface. While high-quality environment is preserved, people can find job oportunities in the intensive housing development without the need for transport. For achievement conception of compact city applies space urban planning. The shape of the estate directly impacted the principle of the proposal together with the city planning context of the current buildings. In the protective zone there is established a huge park with water reservoirs. The walk-through trade parterre is filled with many various functions, on its walkable roof is created a semi-public zone with skylights and freely introduced verdure. On the walkable roof there are independent blocks of apartments and public facilities. In the northern and southern corner are located public-service utilities and in the middle of this area there is a nursery and a kindergarden. In structural terms the building it is about cast-in-place concrete reinforced frame based on a white concrete foundation which has one underground level and five above-ground levels.

The building of Roman Baths and sauna world forms, along with a formerly-designed waterpark, a stand-alone recreational and sports compound in the vicinity of “Růžena's” quarry and the former “Hády” quarry in Brno. The mass of the object is nearly cubic, and in the cross direction it is complemented with an external atrium, with swimming pools situated next to the central glass-fronted part of the object. This bright space functions as a place of relaxation and offers a view of the city of Brno. The view and solar energy have been used in the south-western part as well, where a two-floor glass front has been designed. On the facades of the object there are narrow vertical windows which create an effect of dripping water. The primary architectonic plan has been to create an object offering relaxation, originated in the principles and traditions of Ancient Roman bathing, complemented with a sauna world and further related relaxation establishments.

The aim of this master's thesis is the construction-technological project of the entire building focusing on major construction building - Multifunctional house, which is based on large-diameter piles. The main part of thesis are budget of object and time schedules of construction. Part of the thesis is organization of construction and design of the site eguipment, technological regulation of selected work, quality control and solving transport relations including oversize cargo. It also deals with the design of mechanical assemblies, health and safety, safety of environment and design of instructions for use of building.