O processo de espessamento e clarificação dos efluentes das usinas de beneficiamento de carvão mineral com a adoção de sedimentadores é uma prática consagrada ao longo de todo o mundo uma vez que é necessário o reaproveitamento da água utilizada tanto por questões econômicas como ambientais. O primeiro sedimentador, tipo espessador, a entrar em operação industrial na região carbonífera de Santa Catarina foi instalado na Mina Barro Branco da Carbonífera Rio Deserto em 2007. O equipamento era dotado de lamelas de PVC e foi instalado como alternativa às bacias de decantação, que apresentam alto custo de construção e operação. Contudo, o equipamento se mostrou ineficaz devido a deposição de sólidos nas lamelas. Essa dificuldade levou a adoção de outros modelos de sedimentadores de fluxo vertical que não utilizam lamelas. Esse trabalho apresenta os dados disponíveis da operação do equipamento com as lamelas na Mina Barro Branco e resultados atuais da operação dos sedimentadores da Mina Esperança sem lamelas. Nesse segundo caso foi medida a vazão, concentração de sólidos e dos metais ferro, alumínio e manganês, nos fluxos de entrada e saída. No efluente clarificado mediu-se ainda o pH e a turbidez. Registraram-se dados de uma operação satisfatória, com impacto importante na redução dos custos no transporte e deposição dos rejeitos finos e no tratamento do overflow clarificado possibilitando o descarte de acordo com a Legislação Ambiental. / The process of thickening and clarifying the effluents of mineral coal processing plants with the use of settlers is a well-established practice throughout the world since it is necessary to reuse the water used for both economic and environmental reasons. The first settler, a thickener type, to enter into industrial operation in the Santa Catarina coal region was installed at the Barro Branco Mine of the Carbonifera Rio Deserto in 2007. The equipment was equipped with PVC lamellae and was installed as an alternative to the decantation basins, which have a high cost of construction and operation. However, the equipment proved to be ineffective due to deposition of solids in the lamellae. This difficulty led to the adoption of other models of vertical flow settlers that do not use lamellae. This work presents the available data of the operation of the equipment with lamellae in the Mina Barro Branco and current results of the operation of the settlers in the Mina Esperança without lamellae. In this second case the flow, concentration of solids and iron, aluminum and manganese metals in the inflow and outflow were measured. In the clarified effluent the pH and turbidity were also measured. Data were recorded for a satisfactory operation, with a significant impact on the reduction of costs in the transportation and deposition of the fine tailings and in the treatment of the clarified overflow, allowing the disposal according to the Environmental Legislation.

O minério de ferro produzido no complexo de Carajás traz consigo características mineralógicas que conferem um elevadíssimo teor de Fe em todas as suas frações granulométricas. Dessa forma, ao final da cadeia produtiva, tanto os produtos comerciais mais grosseiros quanto os finos contem cerca de 62% de Fe contido na sua composição. Importante destacar que em Carajás as fases no processamento desse minério são apenas para cominuição e classificação por tamanho. Não existem etapas de concentração e os produtos são diferenciados por suas respectivas curvas granulométricas: o “granulado” - mais grosseiro (> 13 mm), o “Sinter-Feed” (< 13 mm e > 0,5 mm) e o “pellet feed” (< 0,15 mm). Garantir a correta distribuição granulométrica da matéria prima é uma premissa de mercado. A ultima etapa da classificação é feita através de hidrociclones e gera um overflow ultrafino de altíssima superfície específica maior que 6.500 Blaine e com 45% até 95 % < 7 μm. E ainda possui um elevado teor de Fe - cerca de 62 %. Dessa forma os objetivos gerais dessa pesquisa buscaram a solução para essa oportunidade de recuperar e vender esses rejeitos. O estudo sugeriu através de ensaios com tecnologias capazes de desaguar os ultrafinos gerados para 9,00 % de umidade, que é o valor que permite a movimentação e o manuseio desses rejeitos, além de permitir sua incorporação na blendagem de produtos mais grossos. Desse modo, foram realizados experimentos em diversos laboratórios externos e em escala piloto na Usina de Carajás com amostras dos dois rejeitos ultrafinos das duas fases de hidrociclonagem: o natural e o moído. Ficou evidente que o equipamento tem de combinar necessariamente e de forma eficiente dois fatores essências ao desaguamento: elevadíssimas pressões e altas temperatura na operação desses ultrafinos. A produtividade atingida foi da ordem de 50 t/h x m² para o rejeito da hidrociclonagem do Sinter Feed e 40 t/h x m² para o rejeito dos hidrociclones da Moagem. / The Iron ore that is produced in Carajás mining complex brings mineralogical characteristics that give a very high Fe content in all its size fractions. Thus, at the end of the production chain both coarser and fine contains about 62% Fe contained in its composition. Importantly, in Carajás stages in the processing of this ore are for reduction and classification by size. There is thus no concentration steps and products are differentiated by their respective size distribution curves: the "grain" - coarser (> 13 mm), the "Sinter-Feed" (<13 mm and > 0.5 mm) and the "pellet feed" (<0.15 mm). Ensure proper particle size distribution of the raw material is a market premise. The last step of classification is made using hydrocyclones and generates an overflow ultrafine high specific surface area greater than 6.500 Blaine and with 45% to 95% <7 μm. And has a high Fe content - about 62%. The overall objectives of this research sought the solution to this opportunity to recover and sell these “tailings”. The study suggested by testing with technologies capable of flowing into the ultrathin generated to 9.00% of moisture, which is the value that allows movement and handling these wastes, and allows their incorporation into the blending of thicker products. Thus, experiments were carried out in several external laboratories and pilot-scale plant in the Carajás with samples of both ultrafine “tailings” of the two phases of hydrocycloning: the natural and the ground. It was evident that the equipment must necessarily match and two efficiently factors essences to dewatering: very high pressure and high temperature operation of these “tailings”. The productivity achieved was around 50 t/h x m² in reject of the Sinter Feed hydrocycloning and 40 t/h x m² to reject of the grinding hydrocyclones.

La formation de gels de silice dans les procédés hydrométallurgiques est très souvent problématique pour la performance des étapes de séparation solide-liquide, en raison du colmatage des filtres. Ces étapes interviennent en aval des étapes de lixiviation visant à mettre en solution les éléments d'intérêts, notamment dans des milieux à forte acidité. Egalement mis en solution au cours de ces attaques acides, le silicium précipite alors sous forme d'oxyde de silicium et forme des gels extrêmement préjudiciables à la filtration. Dans le cadre d'une collaboration avec ERAMET Research, centre de recherche d'ERAMET, groupe minier français qui conçoit des procédés hydrométallurgiques, nous avons étudié l'influence des conditions de lixiviation d'un minerai spécifique sur la cinétique de dissolution du silicium ainsi que sur les mécanismes de précipitation de la silice en milieu acide. Nous avons montré qu'en-dessous d'une valeur de pH égale à 2, la silice polymérise pour former des gels suivant des mécanismes indépendants de la composition ionique de la solution. L'étude structurale des gels obtenus, réalisée par diffusion de rayonnement aux petits angles (SAXS) nous a conduit à proposer un modèle pour la mésostructure qui permet de comprendre leur impact sur les vitesses de filtration. Par la suite, des stratégies consistant à modifier la mésostructure des gels par des approches physiques ou physico-chimiques ont été considérées. Les résultats obtenus ont montré la possibilité d'utiliser à court terme ces stratégies pour améliorer la filtrabilité des gels de silice dans un procédé hydrométallurgique. / The formation of silica gels in hydrometallurgical processes is very often problematic for the performance of the solid-liquid separation steps, due to clogging of the filters. These steps are carried out downstream of leaching aiming to solubilize the elements of interests, in particular in solutions with strong acidity. Also dissolved during acidic leaching, the silicon then precipitates in the form of silicon oxide and forms gels extremely detrimental to filtration. In collaboration with ERAMET Research, a research center of ERAMET, a french mining group that designs hydrometallurgical processes, we studied the influence of the leaching conditions of a specific ore on the dissolution kinetics of silicon as well as on the mechanisms of precipitation of silica in an acidic solution. We have shown that below a pH value of 2, silica polymerizes to form gels following mechanisms independent of the ionic composition of the solution. Based, on the structural study of the gels, carried out by small angle radiation scattering (SAXS) we proposed a model for the mesotructure, which explain the impact on filtration rates. Subsequently, strategies to modify the mesostructure of the gels by physical or physicochemical approaches were considered. The results have shown the potentialities of these strategies in the short term to improve the filterability of precipitated silica gels in a hydrométallurgical process.

Made available in DSpace on 2014-06-11T19:34:57Z (GMT). No. of bitstreams: 0 Previous issue date: 2008-12-06Bitstream added on 2014-06-13T20:05:56Z : No. of bitstreams: 1 cruz_oc_dr_jabo.pdf: 582231 bytes, checksum: 0d0f21ba758e5ca444fec02d67a3b555 (MD5) / Funep / Os hidrociclones são equipamentos amplamente utilizados pela indústria em processos envolvendo separação sólido-líquido, porém, ainda, pouco divulgados na agricultura irrigada brasileira. Buscou-se neste trabalho determinar a perda de carga e avaliar o desempenho de um hidrociclone de geometria “Rietema” como pré-filtro de partículas sólidas. Os testes foram realizados no Centro Federal de Educação Tecnológica de Uberaba - MG - Brasil utilizando um hidrociclone de geometria “Rietema”. Este equipamento possui um diâmetro de 19,20 cm na parte cilíndrica e opera com vazões variando entre 10 m3 h-1 e 27 m3 h-1. Os materiais particulados usados em suspensão foram: solo franco-argiloso e areia de rio. Os resultados mostraram que a perda de carga máxima média foi de 52 kPa e 47 kPa para as suspensões aquosas de areia e solo, respectivamente. Seu melhor desempenho ocorreu operando com suspensão aquosa de areia, apresentando eficiência total de 92,31% para a vazão de 26,97 m3 h-1. Dentre as conclusões pode-se inferir que o equipamento avaliado é eficiente para remoção de partículas de areia, podendo ser utilizado como pré-filtro em sistemas de irrigação. / The hydrocyclones are equipments widely used by industry in cases involving solid-liquid separation, but still, little reported in brazilian irrigated agriculture. The proposal of this research was to determining the head loss and evaluate the performance of a hydrocyclone of geometry “Rietema” as a pre-filter of solid particles. The tests were performed in the Centro Federal de Educação Tenológica de Uberaba - MG - Brazil using a hydrocyclone of Rietema geometry. This equipment has a diameter of 19.20 cm at the cylindrical part and operates with flows ranging between 10 m3 h-1 and 27 m3 h-1. The materials used in particulate suspension were: clay loam soil and sand from river. The results showed that the average maximum head loss was 52 kPa and 47 kPa of aqueous suspensions of sand and soil, respectively. Its best performance occurred operating with slurry of sand, presenting total efficiency of 92.31% for flow rate of 26.97 m3 h-1. Among the conclusions can be inferred that the equipment is judged effective at removing particles of sand and can be used as pre-filter in irrigation systems.

O processo de espessamento e clarificação dos efluentes das usinas de beneficiamento de carvão mineral com a adoção de sedimentadores é uma prática consagrada ao longo de todo o mundo uma vez que é necessário o reaproveitamento da água utilizada tanto por questões econômicas como ambientais. O primeiro sedimentador, tipo espessador, a entrar em operação industrial na região carbonífera de Santa Catarina foi instalado na Mina Barro Branco da Carbonífera Rio Deserto em 2007. O equipamento era dotado de lamelas de PVC e foi instalado como alternativa às bacias de decantação, que apresentam alto custo de construção e operação. Contudo, o equipamento se mostrou ineficaz devido a deposição de sólidos nas lamelas. Essa dificuldade levou a adoção de outros modelos de sedimentadores de fluxo vertical que não utilizam lamelas. Esse trabalho apresenta os dados disponíveis da operação do equipamento com as lamelas na Mina Barro Branco e resultados atuais da operação dos sedimentadores da Mina Esperança sem lamelas. Nesse segundo caso foi medida a vazão, concentração de sólidos e dos metais ferro, alumínio e manganês, nos fluxos de entrada e saída. No efluente clarificado mediu-se ainda o pH e a turbidez. Registraram-se dados de uma operação satisfatória, com impacto importante na redução dos custos no transporte e deposição dos rejeitos finos e no tratamento do overflow clarificado possibilitando o descarte de acordo com a Legislação Ambiental. / The process of thickening and clarifying the effluents of mineral coal processing plants with the use of settlers is a well-established practice throughout the world since it is necessary to reuse the water used for both economic and environmental reasons. The first settler, a thickener type, to enter into industrial operation in the Santa Catarina coal region was installed at the Barro Branco Mine of the Carbonifera Rio Deserto in 2007. The equipment was equipped with PVC lamellae and was installed as an alternative to the decantation basins, which have a high cost of construction and operation. However, the equipment proved to be ineffective due to deposition of solids in the lamellae. This difficulty led to the adoption of other models of vertical flow settlers that do not use lamellae. This work presents the available data of the operation of the equipment with lamellae in the Mina Barro Branco and current results of the operation of the settlers in the Mina Esperança without lamellae. In this second case the flow, concentration of solids and iron, aluminum and manganese metals in the inflow and outflow were measured. In the clarified effluent the pH and turbidity were also measured. Data were recorded for a satisfactory operation, with a significant impact on the reduction of costs in the transportation and deposition of the fine tailings and in the treatment of the clarified overflow, allowing the disposal according to the Environmental Legislation.

O minério de ferro produzido no complexo de Carajás traz consigo características mineralógicas que conferem um elevadíssimo teor de Fe em todas as suas frações granulométricas. Dessa forma, ao final da cadeia produtiva, tanto os produtos comerciais mais grosseiros quanto os finos contem cerca de 62% de Fe contido na sua composição. Importante destacar que em Carajás as fases no processamento desse minério são apenas para cominuição e classificação por tamanho. Não existem etapas de concentração e os produtos são diferenciados por suas respectivas curvas granulométricas: o “granulado” - mais grosseiro (> 13 mm), o “Sinter-Feed” (< 13 mm e > 0,5 mm) e o “pellet feed” (< 0,15 mm). Garantir a correta distribuição granulométrica da matéria prima é uma premissa de mercado. A ultima etapa da classificação é feita através de hidrociclones e gera um overflow ultrafino de altíssima superfície específica maior que 6.500 Blaine e com 45% até 95 % < 7 μm. E ainda possui um elevado teor de Fe - cerca de 62 %. Dessa forma os objetivos gerais dessa pesquisa buscaram a solução para essa oportunidade de recuperar e vender esses rejeitos. O estudo sugeriu através de ensaios com tecnologias capazes de desaguar os ultrafinos gerados para 9,00 % de umidade, que é o valor que permite a movimentação e o manuseio desses rejeitos, além de permitir sua incorporação na blendagem de produtos mais grossos. Desse modo, foram realizados experimentos em diversos laboratórios externos e em escala piloto na Usina de Carajás com amostras dos dois rejeitos ultrafinos das duas fases de hidrociclonagem: o natural e o moído. Ficou evidente que o equipamento tem de combinar necessariamente e de forma eficiente dois fatores essências ao desaguamento: elevadíssimas pressões e altas temperatura na operação desses ultrafinos. A produtividade atingida foi da ordem de 50 t/h x m² para o rejeito da hidrociclonagem do Sinter Feed e 40 t/h x m² para o rejeito dos hidrociclones da Moagem. / The Iron ore that is produced in Carajás mining complex brings mineralogical characteristics that give a very high Fe content in all its size fractions. Thus, at the end of the production chain both coarser and fine contains about 62% Fe contained in its composition. Importantly, in Carajás stages in the processing of this ore are for reduction and classification by size. There is thus no concentration steps and products are differentiated by their respective size distribution curves: the "grain" - coarser (> 13 mm), the "Sinter-Feed" (<13 mm and > 0.5 mm) and the "pellet feed" (<0.15 mm). Ensure proper particle size distribution of the raw material is a market premise. The last step of classification is made using hydrocyclones and generates an overflow ultrafine high specific surface area greater than 6.500 Blaine and with 45% to 95% <7 μm. And has a high Fe content - about 62%. The overall objectives of this research sought the solution to this opportunity to recover and sell these “tailings”. The study suggested by testing with technologies capable of flowing into the ultrathin generated to 9.00% of moisture, which is the value that allows movement and handling these wastes, and allows their incorporation into the blending of thicker products. Thus, experiments were carried out in several external laboratories and pilot-scale plant in the Carajás with samples of both ultrafine “tailings” of the two phases of hydrocycloning: the natural and the ground. It was evident that the equipment must necessarily match and two efficiently factors essences to dewatering: very high pressure and high temperature operation of these “tailings”. The productivity achieved was around 50 t/h x m² in reject of the Sinter Feed hydrocycloning and 40 t/h x m² to reject of the grinding hydrocyclones.

The Refcoal process is being developed to produce graphite from coal. Coal is dissolved in dimethylformamide (DMF) and sodium hydroxide (NaOH) is used as additive. After separation, the extracted coal (Refcoal) is precipitated with water and dried. The extraction process and subsequent solid-liquid separation processes have to be as efficient and cost-effective as possible. The purpose of the study was therefore to complete research on various unresolved aspects of the processes as identified by the candidate and supervisor. Extraction at 95 °C (DMF:coal:NaOH = 100:10:1), has an induction period of approximately 60 minutes observed, after which the reaction rate increases considerably. The reaction reaches completion after 360 minutes. An increase in stirring rate decreases extraction time due to the elimination of external mass-transfer limitations. The progress curves obtained for extraction at 135 °C with lower solvent-to-coal ratios differ dramatically from those obtained in previous studies, which indicates that changes in the raw materials and the experimental set-up have a great influence on the extraction at higher temperatures and concentrations. These extractions at higher temperatures using DMF:coal:NaOH ratios between 100:30:3 and 100:30:2 take approximately 360 minutes to complete and do not have an induction period as is the case with the extractions at 95 °C. It was found that the optimum DMF:coal ratio for an operating temperature of 135 °C, is 10:3. The high-temperature extractions reach completion in different time periods, depending on the amount of NaOH added to the reaction mixture. When very low concentrations of NaOH are added, the extraction will take much longer to complete and vice versa. The amount of NaOH used influences various aspects of the process. The cost analysis of the process falls beyond the scope of this investigation, but it is recommended that a thorough financial study is done to determine the optimum balance between raw materials, heat load and plant availability. The relationships between the concentration of Refcoal in the Refcoal solution and the absorbance values measured are polynomial expressions ending in downward concaves. The kinetics for the low-concentration (DMF:coal:NaOH = 100:10:1) extraction are best described by an autocatalytic reaction rate equation which is a function of coal, coal complex and NaOH concentration. A good fit was also obtained for the high temperature extractions. The rate expression is a function of both the coal and NaOH concentrations, but not of the coal complex. The sedimentation test showed promising results. The use of a thickener instead of a centrifuge to separate the insoluble material from the Refcoal solution would be a feasible cost-saving method. Filtration of the Refcoal solution (after centrifugation) using suitable filter media decreases the amount of impurities in the Refcoal. Filtration constants were determined for the best filter medium. The use of a hydrocyclone to separate the insoluble material from the extract is not recommended as it did not give the required efficiency to make the process viable. It is recommended that more tests be done under different conditions. Useful expressions were obtained for the change in viscosity with temperature for three different concentrations of Refcoal solution. It was determined that the viscosity of the Refcoal solution increases with time and it is therefore recommended that this be taken into account when equipment is being designed and plant scheduling is being done. / Dissertation (MEng (Chemical Engineering))--University of Pretoria, 2007. / Chemical Engineering / MEng / unrestricted

No description available.

Dans une problématique de réduction des volumes de déchet, l’électro-compression (ou électro-déshydratation) apparaît être une technique efficace pour éliminer une grande partie de l’eau des boues résiduaires urbaines. Cette thèse de doctorat présente différentes contributions à l’étude de ce procédé appliqué à ce type de boues. Un lien entre les données cinétiques et énergétiques est établi par une étude expérimentale à l’échelle du laboratoire. D’autre part, un nouveau modèle relativement simple est proposé pour l’étude et la simulation de l’électro-compression et permet de mettre en avant les phénomènes prépondérants. Enfin, un protocole d’analyse ionique des filtrats et des tranches de gâteaux de boue a permis une étude de la migration des espèces chimiques au cours de l’électro-déshydratation. / In the purpose to reduce waste amount, the electro-dewatering process is a promising technique to efficiently withdraw a large part of the water included in wastewater sludge. This PhD thesis contributes in various ways to the study of this technique. Lab-scale experiments showed correlations between dewatering kinetics and energy consumption of the process. Moreover, a new model, relatively simple, is proposed to study and simulate the process. This model highlights the main phenomena involved in the electro-dewatering. Finally, a study of the migration of chemical species during the dewatering process is carried out thanks to an analytical protocol measuring ions in filtrates and sludge slices.1

Le secteur de la méthanisation à la ferme ou territoriale connait un fort développement, entrainant la production de grandes quantités de digestats. Si la fraction solide de ces digestats est généralement utilisée en tant qu’amendement organique, la fraction liquide peut être valorisée par la récupération des éléments minéraux bien que la présence de composés organiques pose des problèmes de traitement et d’élimination. Les objectifs de cette thèse sont i) de caractériser la fraction liquide des digestats et donner des premiers éléments pour leur futur traitement et ii) d’expliquer la variabilité des composés résiduels présents dans cette fraction liquide en relation avec l’origine des substrats, les paramètres du procédé de méthanisation et le type de séparation solide/liquide. Dans une première partie, nous avons caractérisé de manière détaillée onze digestats issus d’installations industrielles de co-digestion. Le fractionnement par neuf filtrations successives de la fraction liquide des digestats a permis de quantifier la contribution des matières en suspension, des colloïdes grossiers et fins et des matières dissoutes aux différents paramètres physico-chimiques et biologiques. Il a été montré la faible biodégradabilité aérobie des composés organiques dont la majeure partie se trouve dans la matière en suspension (> 1,2 µm). Pour élargir la base de données, nous avons caractérisé dix-huit digestats supplémentaires et un digestat de boues de station d’épuration dont les fractions liquides ont été fractionnées par deux filtrations successives (1,2 μm et 1 kDa). L’analyse en composantes principales, la classification hiérarchique et la matrice de corrélation réalisées sur l’ensemble des 30 digestats ont mis en avant l’impact majeur des techniques de séparation solide/liquide sur la composition de la fraction liquide des digestats. Dans le groupe des techniques de séparation hautement performantes, des sous-groupes ont permis de distinguer les digestats à base de boues d’épuration, ceux à base de lisiers porcins et ceux issus de procédés piston thermophiles. Dans le groupe des procédés de séparation à faible performance, les teneurs en DCO et matières sèches de la fraction liquide des digestats ont été corrélées aux teneurs en cultures énergétiques et fumiers bovins dans l’alimentation. Finalement, pour l’ensemble des digestats, le paramètre SUVA, lié à la teneur en matière aromatique et à la stabilisation des composés, a été corrélé au temps de séjour des digesteurs. Pour comprendre l’origine des composés résiduels observés dans la fraction liquide des digestats issus de la co-digestion avec de fortes proportions de fumier bovin, quatre réacteurs CSTR alimentés avec respectivement de la paille de blé, de la bouse de vache et du fumier ont été conduits pendant 48 semaines. Les performances de méthanisation ont mis en évidence le caractère âgé du fumier qui avait été partiellement dégradé pendant le stockage à la ferme. Ainsi la fraction liquide du digestat du fumier a présenté les plus fortes concentrations en composés organiques qui en outre présentaient une complexité, mesurée par fluorimétrie 3D, plus élevée que les autres substrats. La fraction liquide du digestat issue de la méthanisation de la paille a révélé les plus fortes proportions de DCO dans les fractions colloïdales et dissoutes. La faible biodégradabilité des composés organiques et leur forte proportion dans les matières en suspension suggèrent le développement de procédés physico-chimiques de séparation tels que la coagulation pour le traitement de la fraction liquide des digestats. / Agricultural and centralized biogas plants are facing a fast development, leading to the production of huge amounts of digestates. Whereas the solid fraction of digestates is used as fertilizer, the liquid fraction can be valorized by the recovery of mineral materials, although the presence of organic compounds may be problematic for the treatment and disposal of this effluent. The objectives of this thesis are: i) to characterize the liquid fraction of digestates and to provide guidelines for its further treatment, ii) to explain the variability of residual compounds in the liquid fraction of digestates in relation with substrate origin, process parameters and the type of solid-liquid separation. In a first part, eleven digestates from full scale codigestion plants were thoroughly characterized. Their liquid fractions were fractionated by nine successive filtrations, which allowed quantifying the contribution of suspended particles, coarse and fine colloids and dissolved matter on several physico-chemical and biological parameters. Organic compounds were mainly found in suspended particles (> 1.2 µm) and presented low aerobic biodegradability. To enlarge the data base, eighteen more digestates from codigestion and one digestate from waste activated sludge were characterized; their liquid fractions were fractionated by two successive filtrations (1.2 μm and 1 kDa). Principal component analysis, hierarchical clustering analysis and correlation matrix carried out on the 30 digestates set, highlighted the major impact of the solid-liquid separation process on the composition of the liquid fraction of digestates. In the high performance separation process group, subgroups allowed separating digestates from sewage sludge, digestates from pig manure and digestates from plug-flow thermophilic processes. In the low performance separation process group, COD and total solids concentration in the liquid fraction of digestates were correlated to the percentage of energy crops and cow manure in the feed. Finally, SUVA parameter which accounts for aromatic compounds content and the stabilization of organic matter, was correlated to the retention time in digester for the whole digestates set. To understand the origin of residual compounds in the liquid fraction of digestates from co-digestion of high proportions of cattle manure, four CSTR reactors fed with wheat straw, cow dung and cow manure were operated for 48 weeks. Anaerobic digestion performances showed that cow manure had undergone some aerobic degradation during its storage at the farm. Therefore, the liquid fraction of manure digestate had the highest concentrations in organic compounds. In addition, these organic compounds had the highest complexity measured by 3D fluorimetry. The low biodegradability of organic compounds and their high percentage in suspended particles suggest the development of physico-chemical separation process such as coagulation for the treatment of the liquid fraction of digestates