The aim of the present research was to gain a better understanding of the species generation and transport from enclosure fires. The species generation experiments were conducted with a half-scale ISO 9705 enclosure with three different ventilation conditions and heat release rates ranging from 50 kW to 500 kW. The transport study was conducted with a 6.1 m long hallway connected to the compartment in a head-on configuration. All measurements were performed at the compartment or hallway exit plane during the steady-state period of the fire. Measurements included species mole fractions of oxygen, carbon dioxide, carbon monoxide, and unburned hydrocarbons, along with gas pressure (used to determine gas velocities) and gas temperatures. Species mappings performed at the exit plane of the compartment indicated that the exiting species are not spatially uniform. Horizontal and vertical gradients in the species mole fractions were observed for all ventilation conditions and heat release rates examined. Predictive techniques developed previously were applied to the data obtained in the present study and were determined to be inappropriate for situations were the plume equivalence ratio was not equal to the global equivalence ratio. A new methodology for predicting species levels at the exit plane of an enclosure was developed. The proposed methodology correlates the species yields based on the combustion within the compartment as a function of a non-dimensional heat release rate. The non-dimensional heat release rate is based on the fuel load and geometrical parameters of the enclosure. The present methodology in applicable to situations where a well-mixed uniform layer is not present and the overall global conditions are of interest. Species transport to remote locations was also examined. Experiments were conducted with the baseline ventilation at x = 0 m (the compartment/hallway interface) and three different ventilation conditions at x = 6.1 m (end of hallway). The three ventilation conditions consisted of the narrow, baseline, and wide doorways. Experiments were conducted for heat release rates of 85 kW, 127 kW, and 150 kW. The results from the tests indicated that, for over-ventilated compartment fires, the hallway and hallway ventilation had no impact on the species generation within the compartment. This allows the correlations developed from the compartment study to be applied to more complex scenarios. Differences in species mole fractions between x = 0 m and x = 6.1 m were shown to be a result of air entrainment into the upper layer within the hallway, which acted as a dilutent or as a source of oxygen for further oxidation reactions. For non-dimensional heat release rates less than 1.0, the reduction in carbon monoxide levels along the hallway was a result of dilution, while for non-dimensional heat release rates greater than or equal to 1.0 the reduction in carbon monoxide levels along the hallway was a combination of dilution and further oxidation reactions. / Ph. D.

The objective of the present study was to acquire a better understanding of parameters controlling the species generation and transport from compartment fires. The experiments were performed in a half-scale ISO 9705 compartment and a 6.1 m long hallway connected in a head-on configuration. The buoyancy driven propane fire was provided by a burner and a continuous gaseous fuel supply system. All the measurements were obtained during the steady state of the fire. The ventilation conditions were fixed and three different fire source elevations were studied for heat release rates ranging from 20 kW to 150kW. The species yields were obtained from performing detailed mapping measurements at the compartment and hallway exit planes. The measurements included local specie mole fractions of oxygen, carbon dioxide, carbon monoxide and unburned hydrocarbons. The local temperature and the local pressure (for local gas velocity calculations) were also measured. In addition, visual observations of the flow dynamic were performed through a window and the vents to give useful insights and lead to a better understanding of the combustion process. The data obtained from the species generation study was analyzed using previously developed methods. The method based on equivalence ratio was presented and determined inappropriate for the present study where the global equivalence ratio was not equal to the plume equivalence ratio due to the complexity of the fire dynamic taking place. The method consisting of correlating the species yields based on the combustion within the compartment as a function of a non dimensional heat release rate allowed qualitative conclusions to be made. The non-dimensional heat release rate was based on the fuel load and the geometric parameters of the compartment. This methodology revealed similarities in the species production between the three fire source elevations investigated. A correlation of the data was obtained based on experimental data. The transport of species to remote locations was studied for the three fire source elevations and fixed ventilation conditions. Species mole fractions and yields were obtained at the compartment exit plane (compartment/hallway interface) and at the hallway exit plane. The results were compared for various heat release rates and showed differences for some scenarios attributed to mixing along the hallway and oxidation reactions outside the compartment. / Master of Science

This master's thesis deals with the optimization of conditions for photochemical generation of volatile species of cobalt. Volatile species of cobalt were generated in a flow injection system using a high-efficiency flow through UV generator from formic acid based medium. For detection a high-resolution continuum source atomic absorption spectrometer was used. The volatile species were atomized using a diffusion flame atomizer because of its high robustness. First the optimizations of the parameters affecting the atomization in the diffusion flame and the parameters affecting the transport of the volatile species from the UV generator into the atomizer were carried out (flow rates and composition of the gases, type of a separator, observation height). After that, the optimization of the parameters of the photochemical generation itself was carried out. These were the composition of a reaction medium (concentration of formic acid and formate, type of formate salt) and irradiation time. The possibility of generation of the volatile species from acetic acid based medium was also investigated, but no signal was observed. At chosen optimal conditions of generation the influence of potential interferents was examined, mainly from inorganic acids (HNO3 and HCl) and some transition metals (Fe, Cu and Ni)....