Spelling suggestions: "subject:"spintransfer torque"" "subject:"spintransfer torque""
11 |
Spin-transfer Torque in Magnetic NanostructuresXiao, Jiang 30 May 2006 (has links)
This thesis consists of three distinct components: (1) a test of Slocnzewski's theory of spin-transfer torque using the Boltzmann equation, (2) a comparison of macrospin models of spin-transfer dynamics in spin valves with experimental data, and (3) a study of spin-transfer torque in continuously variable
magnetization.
Slonczewski developed a simple circuit theory for spin-transfer torque in spin valves with thin spacer layer. We developed a numerical method to calculate the spin-transfer torque in a spin valve using Boltzmann equation. In almost all realistic cases, the circuit theory predictions agree well with the Boltzmann equation results.
To gain a better understanding of experimental results for spin valve systems, current-induced magnetization dynamics for a spin valve are studied using a single-domain approximation and a generalized Landau-Lifshitz-Gilbert equation. Many features of the experiment were reproduced by the simulations. However, there are two significant discrepancies: the current dependence of the magnetization precession frequency, and the presence and/or absence of a microwave quiet magnetic phase with a distinct magnetoresistance signature.
Spin-transfer effects in systems with continuously varying magnetization also have attracted much attention. One key question is under what condition is the spin current adiabatic, i.e., aligned to the local magnetization. Both quantum and semi-classical calculations of the spin current and spin-transfer torque are done in a free-electron Stoner model. The calculation shows that, in the adiabatic limit, the spin current aligns to the local magnetization while the spin density does not. The reason is found in an effective field produced by the gradient of the magnetization in the wall. Non-adiabatic effects arise for short domain walls, but their magnitude decreases exponentially as the wall width increases.
|
12 |
Fabrication and Characterization of Nanocontact Spin-Torque OscillatorsRedjai Sani, Sohrab January 2013 (has links)
The manufacturing of nanocontact-based spin-torque oscillators (NC-STOs)has opened the door for spintronic devices to play a part as active microwaveelements. The NC-STO has the capability of converting a direct current intoa microwave signal, and vice versa, by utilizing the spin transfer torque (STT)in ferromagnetic multilayer systems. However, the high-frequency operation ofNC-STOs typically requires high magnetic fields and the microwave power theygenerate is rather limited. As a result, NC-STOs are not yet commercially used,and they require improvements in both material systems and device geometriesbefore they can find actual use in microwave applications. In order to improve and advance this technology, NC-STOs are requiredwith both different nanocontact (NC) sizes and geometries, and using differ- ent stacks of magnetic materials. This dissertation presents experimental in- vestigations into the manufacturing of such devices using different fabrication techniques and a number of different magnetic material stacks. Currently, the fabrication of NC-STOs is limited to advanced laboratories, because NC fabri- cation requires high-resolution lithography tools. In the present work, we have developed an alternative method of fabrication, which does not require such tools and has the capability of fabricating NC-STOs having one to hundreds of NCs in a variety of sizes, possibly down to 20 nm. Devices fabricated with this method have shown mutual synchronization of three parallel-connected NCs, and pairwise synchronization in devices with four and five NCs. Furthermore, the present work demonstrates low-field operation (down to0.02 Tesla) of NC-STOs at a record high frequency of 12 GHz. This wasachieved by implementing multilayers with a perpendicular magnetic anisotropy(PMA) material in the free layer of the NC-STO. In addition, the fabricateddevices revealed an unexpected dynamic regime under large external appliedfield (above 0.4 Tesla). The new dynamic regime was found to be due to anentirely novel nanomagnetic dynamic object â a so-called magnetic droplet soliton,predicted theoretically in 1977 but not experimentally observed until now.Detailed experiments and micromagnetic simulations show that the droplet hasvery rich dynamics. Finally, spin-torque-induced transverse spin wave instabilities have beenstudied. A NC-STO with a material stack consisting of a single ferromag- netic metal sandwiched between two non-ferromagnetic metals was fabricated. Prior to this work, evidence of spin wave instabilities was reported as resis- tance switching in nanopillar- and mechanical point contact based STOs. In the present work, the fabricated NC-STOs showed actual microwave signals up to 3 GHz under zero applied field with strong current hysteresis. All the fabricated NC-STOs open up new means of studying STT in different environ- ments, in order to resolve their current drawbacks for industrial applications. / <p>QC 20130527</p>
|
13 |
Magnetic dynamics in antiferromagnetically-coupled ferrimagnets: The role of angular momentum / 反強磁性的な磁化結合を持つフェリ磁性体の磁化ダイナミクス: 角運動量の役割Okuno, Takaya 23 March 2020 (has links)
京都大学 / 0048 / 新制・課程博士 / 博士(理学) / 甲第22270号 / 理博第4584号 / 新制||理||1658(附属図書館) / 京都大学大学院理学研究科化学専攻 / (主査)教授 小野 輝男, 教授 吉村 一良, 教授 島川 祐一 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM
|
14 |
Circuit Simulation of All-Spin LogicAlawein, Meshal 05 1900 (has links)
With the aggressive scaling of complementary metal-oxide semiconductor (CMOS) nearing an inevitable physical limit and its well-known power crisis, the quest for an alternative/augmenting technology that surpasses the current semiconductor electronics is needed for further technological progress. Spintronic devices emerge as prime candidates for Beyond CMOS era by utilizing the electron spin as an extra degree of freedom to decrease the power consumption and overcome the velocity limit connected with the charge.
By using the nonvolatility nature of magnetization along with its direction to represent a bit of information and then manipulating it by spin-polarized currents, routes are opened for combined memory and logic. This would not have been possible without the recent discoveries in the physics of nanomagnetism such as spin-transfer torque (STT) whereby
a spin-polarized current can excite magnetization dynamics through the transfer of spin angular momentum. STT have expanded the available means of switching the magnetization of magnetic layers beyond old classical techniques, promising to fulfill the need for a new generation of dense, fast, and nonvolatile logic and storage devices. All-spin logic (ASL) is among the most promising spintronic logic switches due to its low power consumption, logic-in-memory structure, and operation on pure spin currents.
The device is based on a lateral nonlocal spin valve and STT switching. It utilizes two nanomagnets (whereby information is stored) that communicate with pure spin currents through a spin-coherent nonmagnetic channel. By using the well-known spin physics and the recently proposed four-component spin circuit formalism, ASL can be thoroughly studied and simulated. Previous attempts to model ASL in the linear and diffusive regime either neglect the dynamic characteristics of transport or do not provide a scalable and robust platform for full micromagnetic simulations and inclusion of other
effects like spin Hall effect and spin-orbit torque. In this thesis, we propose an improved stochastic magnetization dynamics/time-dependent spin transport model based on a finite-difference scheme of both the temporal and spatial derivatives to capture the key features of ASL. The approach yields new finite-difference conductance matrices, which, in addition to recovering the steady-state results, captures the dynamic behavior. The new conductance matrices are general in that the discretization framework can be readily
applied and extended to other spintronic devices. Also, we provide a stable algorithm that can be used to simulate a generic ASL switch using the developed model.
|
15 |
Spin-transfer torques in MgO-based magnetic tunnel junctionsBernert, Kerstin 12 March 2014 (has links) (PDF)
This thesis discusses spin-transfer torques in MgO-based magnetic tunnel junctions. The voltage-field switching phase diagrams have been experimentally determined for in-plane CoFeB/MgO/CoFeB magnetic tunnel junctions. In order to limit the effect of thermal activation, experiments have been carried out using nanosecond voltage pulses, as well as at low-temperature (4.2 K).
The bias-dependence of the two spin-torque terms (Slonczewski-like and field-like) has been determined from thermally-excited ferromagnetic resonance measurements, yielding values which are in good agreement with previous reports. Additionally, material parameters such as the effective magnetisation and the damping factor have also been extracted.
Using these values as input, the switching voltages as function of the applied magnetic field have been calculated numerically and analytically by solving the modified Landau-Lifshitz-Gilbert equation. Unlike previous studies, the field-like spin-torque has also been included. Moreover, different configurations have been considered for the magnetic anisotropy directions of the reference and free layer, respectively. / Diese Arbeit befasst sich mit Spin-Transfer-Torque-Effekten in MgO-basierten magnetischen Tunnelstrukturen. Die Phasendiagramme als Funktion von Spannung und Magnetfeld von CoFeB/MgO/CoFeB-Tunnelstrukturen mit Magnetisierung in der Ebene wurden experimentell bestimmt. Um thermische Anregungseffekte zu limitieren, wurden die Experimente einerseits mit nanosekundenlangen Spannungspulsen und andererseits bei niedrigen Temperaturen (4.2 K) durchgeführt.
Die Spannungsabhängigkeit der beiden Spin-Torque-Parameter (in-plane und senkrechter Spin-Transfer-Torque) wurde aus Messungen der thermisch angeregten ferromagnetischen Resonanz bestimmt, wobei sich Werte ergaben, die gut mit vorangegangenen Untersuchungen übereinstimmen. Zusätzlich wurden Werte für Materialparameter wie die effektive Magnetisierung und den Dämpfungsparameter gewonnen.
Unter Verwendung der erhaltenen Werte wurden die Schaltspannungen als Funktion des angelegten Magnetfeldes analytisch und numerisch berechnet, indem die erweiterte Landau-Lifshitz-Gilbert-Gleichung gelöst wurde. Im Gegensatz zu vorangegangenen Untersuchungen wurde der senkrechte Spin-Transfer-Torque dabei mit einbezogen. Darüber hinaus wurden verschiedene Konfigurationen für die Richtung der magnetischen Anisotropie der freien und fixierten Schicht berücksichtigt.
|
16 |
Spin-transfer torques in MgO-based magnetic tunnel junctionsBernert, Kerstin 03 February 2014 (has links)
This thesis discusses spin-transfer torques in MgO-based magnetic tunnel junctions. The voltage-field switching phase diagrams have been experimentally determined for in-plane CoFeB/MgO/CoFeB magnetic tunnel junctions. In order to limit the effect of thermal activation, experiments have been carried out using nanosecond voltage pulses, as well as at low-temperature (4.2 K).
The bias-dependence of the two spin-torque terms (Slonczewski-like and field-like) has been determined from thermally-excited ferromagnetic resonance measurements, yielding values which are in good agreement with previous reports. Additionally, material parameters such as the effective magnetisation and the damping factor have also been extracted.
Using these values as input, the switching voltages as function of the applied magnetic field have been calculated numerically and analytically by solving the modified Landau-Lifshitz-Gilbert equation. Unlike previous studies, the field-like spin-torque has also been included. Moreover, different configurations have been considered for the magnetic anisotropy directions of the reference and free layer, respectively.:1 Introduction
2 Fundamentals
2.1 Magnetoresistance
2.1.1 Giant magnetoresistance
2.1.2 Tunnel magnetoresistance
2.2 Spin-transfer torque effect
2.2.1 Physical picture of the STT
2.2.2 In-plane and perpendicular STT
2.3 Equation of motion for the magnetisation
2.3.1 The Landau-Lifshitz-Gilbert equation
2.3.2 Extension including spin-transfer-torque (LLGS)
2.4 Applications of MR and spin-transfer torque
2.4.1 Read heads in hard disk drives
2.4.2 Spin-transfer torque magnetic random access memory
2.5 STT effects in magnetic tunnel junctions
2.5.1 Current-induced switching
2.5.2 Magnetisation precession
2.5.3 Bias-dependence of STT
2.5.4 Back-hopping
3 Experimental
3.1 Samples
3.1.1 Stack composition
3.1.2 Properties of samples used in this work
3.2 Experimental setup
3.2.1 Overview of equipment for the different measurement techniques
3.2.2 Electromagnet and Kepco power supply
3.2.3 Contacting of the sample
3.2.4 Principle specifications of equipment
3.3 Experimental techniques
3.3.1 Measurement of DC R-H and R-I loops
3.3.2 Measurement of phase diagrams: off and on-pulse
3.3.3 Thermally-excited ferromagnetic resonance
4 Results and discussion
4.1 Switching phase diagrams of MTJs
4.1.1 Theory: Calculating the phase diagram
4.1.2 Experimental phase diagrams
4.2 Thermally excited ferromagnetic resonance
4.2.1 Smoothing and fitting of raw data
4.2.2 Determination of Ms
4.2.3 Signal evolution with bias voltage
4.2.4 Analysis of peak position: perpendicular STT
4.2.5 Analysis of peak linewidth
5 Summary and outlook
A Appendix
List of figures
List of tables
Bibliography / Diese Arbeit befasst sich mit Spin-Transfer-Torque-Effekten in MgO-basierten magnetischen Tunnelstrukturen. Die Phasendiagramme als Funktion von Spannung und Magnetfeld von CoFeB/MgO/CoFeB-Tunnelstrukturen mit Magnetisierung in der Ebene wurden experimentell bestimmt. Um thermische Anregungseffekte zu limitieren, wurden die Experimente einerseits mit nanosekundenlangen Spannungspulsen und andererseits bei niedrigen Temperaturen (4.2 K) durchgeführt.
Die Spannungsabhängigkeit der beiden Spin-Torque-Parameter (in-plane und senkrechter Spin-Transfer-Torque) wurde aus Messungen der thermisch angeregten ferromagnetischen Resonanz bestimmt, wobei sich Werte ergaben, die gut mit vorangegangenen Untersuchungen übereinstimmen. Zusätzlich wurden Werte für Materialparameter wie die effektive Magnetisierung und den Dämpfungsparameter gewonnen.
Unter Verwendung der erhaltenen Werte wurden die Schaltspannungen als Funktion des angelegten Magnetfeldes analytisch und numerisch berechnet, indem die erweiterte Landau-Lifshitz-Gilbert-Gleichung gelöst wurde. Im Gegensatz zu vorangegangenen Untersuchungen wurde der senkrechte Spin-Transfer-Torque dabei mit einbezogen. Darüber hinaus wurden verschiedene Konfigurationen für die Richtung der magnetischen Anisotropie der freien und fixierten Schicht berücksichtigt.:1 Introduction
2 Fundamentals
2.1 Magnetoresistance
2.1.1 Giant magnetoresistance
2.1.2 Tunnel magnetoresistance
2.2 Spin-transfer torque effect
2.2.1 Physical picture of the STT
2.2.2 In-plane and perpendicular STT
2.3 Equation of motion for the magnetisation
2.3.1 The Landau-Lifshitz-Gilbert equation
2.3.2 Extension including spin-transfer-torque (LLGS)
2.4 Applications of MR and spin-transfer torque
2.4.1 Read heads in hard disk drives
2.4.2 Spin-transfer torque magnetic random access memory
2.5 STT effects in magnetic tunnel junctions
2.5.1 Current-induced switching
2.5.2 Magnetisation precession
2.5.3 Bias-dependence of STT
2.5.4 Back-hopping
3 Experimental
3.1 Samples
3.1.1 Stack composition
3.1.2 Properties of samples used in this work
3.2 Experimental setup
3.2.1 Overview of equipment for the different measurement techniques
3.2.2 Electromagnet and Kepco power supply
3.2.3 Contacting of the sample
3.2.4 Principle specifications of equipment
3.3 Experimental techniques
3.3.1 Measurement of DC R-H and R-I loops
3.3.2 Measurement of phase diagrams: off and on-pulse
3.3.3 Thermally-excited ferromagnetic resonance
4 Results and discussion
4.1 Switching phase diagrams of MTJs
4.1.1 Theory: Calculating the phase diagram
4.1.2 Experimental phase diagrams
4.2 Thermally excited ferromagnetic resonance
4.2.1 Smoothing and fitting of raw data
4.2.2 Determination of Ms
4.2.3 Signal evolution with bias voltage
4.2.4 Analysis of peak position: perpendicular STT
4.2.5 Analysis of peak linewidth
5 Summary and outlook
A Appendix
List of figures
List of tables
Bibliography
|
17 |
Spin Dynamics and Magnetic MultilayersSkubic, Björn January 2007 (has links)
<p>Theoretical studies based on first-principles theory are presented for a number of different magnetic systems. The first part of the thesis concerns spin dynamics and the second part concerns properties of magnetic multilayers. The theoretical treatment is based on electronic structure calculations performed by means of density functional theory.</p><p>A method is developed for simulating atomistic spin dynamics at finite temperatures, which is based on solving the equations of motion for the atomic spins by means of Langevin dynamics. The method relies on a mapping of the interatomic exchange interactions from density functional theory to a Heisenberg Hamiltonian. Simulations are performed for various magnetic systems and processes beyond the reach of conventional micromagnetism. As an example, magnetization dynamics in the limit of large magnetic and anisotropy fields is explored. Moreover, the method is applied to studying the dynamics of systems with complex atomic order such as the diluted magnetic semiconductor MnGaAs and the spin glass alloy CuMn. The method is also applied to a Fe thin film and a Fe/Cr/Fe trilayer system, where the limits of ultrafast switching are explored. Current induced magnetization dynamics is investigated by calculating the current induced spin-transfer torque by means of density functional theory combined with the relaxation time approximation and semi-classical Boltzmann theory. The current induced torque is calculated for the helical spin-density waves in Er and fcc Fe, where the current is found to promote a rigid rotation of the magnetic order.</p><p>Properties of magnetic multilayers composed of magnetic and nonmagnetic layers are investigated by means of the Korringa-Kohn-Rostocker interface Green's function method. Multilayer properties such as magnetic moments, interlayer exchange coupling and ordering temperatures are calculated and compared with experiments, with focus on understanding the influence of interface quality. Moreover, the influence on the interlayer exchange coupling of alloying the nonmagnetic spacer layers with small amounts of a magnetic impurity is investigated.</p>
|
18 |
Spin Dynamics and Magnetic MultilayersSkubic, Björn January 2007 (has links)
Theoretical studies based on first-principles theory are presented for a number of different magnetic systems. The first part of the thesis concerns spin dynamics and the second part concerns properties of magnetic multilayers. The theoretical treatment is based on electronic structure calculations performed by means of density functional theory. A method is developed for simulating atomistic spin dynamics at finite temperatures, which is based on solving the equations of motion for the atomic spins by means of Langevin dynamics. The method relies on a mapping of the interatomic exchange interactions from density functional theory to a Heisenberg Hamiltonian. Simulations are performed for various magnetic systems and processes beyond the reach of conventional micromagnetism. As an example, magnetization dynamics in the limit of large magnetic and anisotropy fields is explored. Moreover, the method is applied to studying the dynamics of systems with complex atomic order such as the diluted magnetic semiconductor MnGaAs and the spin glass alloy CuMn. The method is also applied to a Fe thin film and a Fe/Cr/Fe trilayer system, where the limits of ultrafast switching are explored. Current induced magnetization dynamics is investigated by calculating the current induced spin-transfer torque by means of density functional theory combined with the relaxation time approximation and semi-classical Boltzmann theory. The current induced torque is calculated for the helical spin-density waves in Er and fcc Fe, where the current is found to promote a rigid rotation of the magnetic order. Properties of magnetic multilayers composed of magnetic and nonmagnetic layers are investigated by means of the Korringa-Kohn-Rostocker interface Green's function method. Multilayer properties such as magnetic moments, interlayer exchange coupling and ordering temperatures are calculated and compared with experiments, with focus on understanding the influence of interface quality. Moreover, the influence on the interlayer exchange coupling of alloying the nonmagnetic spacer layers with small amounts of a magnetic impurity is investigated.
|
19 |
Magnetization Dynamics in Nano-Contact Spin Torque Oscillators : Solitonic bullets and propagating spin wavesBonetti, Stefano January 2010 (has links)
Magnetization dynamics in nano-contact spin torque oscillators (STOs) is investigated from an experimental and theoretical point of view. The fundamentals of magnetization dynamics due to spin transfer torque are given. A custom-made high frequency (up to 46 GHz) in large magnetic fields (up to 2.2 T) microwave characterization setup has been built for the purpose and described in this thesis. A unique feature of this setup is the capability of applying magnetic fields at any direction θe out of the sample plane, and with high precision. This is particularly important, because the (average) out-of-plane angle of the STO free magnetic layer has fundamental impact on spin wave generation and STO operation. By observing the spin wave spectral emission as a function of θe, we find that at angles θe below a certain critical angle θcr, two distinct spin wave modes can be excited: a propagating mode, and a localized mode of solitonic character (so called spin wave bullet). The experimental frequency, current threshold and frequency tuneability with current of the two modes can be described qualitatively by analytical models and quantitatively by numerical simulations. We are also able to understand the importance, so far underestimated, of the Oersted field in the dynamics of nano-contact STOs. In particular, we show that the Oersted field strongly affects the current tuneability of the propagating mode at subcritical angles, and it is also the fundamental cause of the mode hopping observed in the time-domain. This mode hopping has been observed both experimentally using a state-of-the-art real-time oscilloscope and corroborated by micromagnetic simulations. Micromagnetic simulations also reveal details of the spatial distribution of the spin wave excitations. By investigating the emitted power as a function of θe, we observed two characteristic behaviors for the two spin wave modes: a monotonic increase of the power for increasing out-of-plane angles in the case of the propagating mode; an increase towards a maximum power followed by a drop of it at the critical angle for the localized mode. Both behaviors are reproduced by micromagnetic simulations. The agreement with the simulations offers also a way to better understand the precession dynamics, since the emitted power is strongly connected to the angular variation of the giant magnetoresistance signal. We also find that the injection locking of spin wave modes with a microwave source has a strong dependence on θe, and reaches a maximum locking strength at perpendicular angles. We are able to describe these results in the theoretical framework of non-linear spin wave dynamics. / QC 20101130
|
20 |
Etude de la dynamique des oscillateurs à vortex par synchronisation et modulation de fréquence / study of the vortex oscillators dynamic by synchronization and frequency modulationMartin, Sylvain Yoann 23 October 2013 (has links)
Depuis 2004, les composants radiofréquence (RF) suscitent un intérêt croissant au sein de la communauté spintronique, tant du point de vue de la physique fondamentale que des applications potentielles. Ces composants ont émergé suite à la découverte du couple de transfert de spin (STT) qui permet d'exciter l'aimantation grâce à un courant électrique. Dans ce contexte, j'ai étudié des oscillateurs à vortex basés sur des jonctions tunnel magnétiques à très faible résistance dans lesquelles un vortex magnétique suit un mouvement périodique dû au STT.On observe des oscillations de ce vortex lorsque la jonction est polarisée par un large courant dc sous un faible champ planaire. En effet, le courant produit à la fois un fort champ d'Ampère, qui contribue à la nucléation du vortex, et génère le STT qui met le vortex en mouvement. Grâce à l'oscillation du vortex, ces composants émettent un signal RF d'une forte puissance (jusqu'à 20nW) avec une fréquence naturelle d'environ 450MHz.J'ai étudié la synchronisation de ces oscillateurs en injectant, en plus courant continu, une excitation RF. Lorsque ce signal d'excitation est suffisamment puissant, l'oscillateur se verrouille sur la source externe. On observe une diminution du bruit autour du pic fondamental et une augmentation de l'amplitude de celui-ci. J'explique ces observations en modélisant le système en tant qu'oscillateur paramétrique. Cette modélisation permet de décrire certains phénomènes observés expérimentalement, comme le fait qu'il est plus facile d'atteindre le régime d'instabilité dynamique quand la fréquence de l'excitation est égale à deux fois la fréquence naturelle de l'oscillateur.Ensuite, j'ai réalisé une expérience de modulation de fréquence (FM), en excitant l'échantillon avec une onde RF à basse fréquence. L'expérience consiste à mesurer la densité spectral de puissance du signal tout en balayant la fréquence de l'onde de modulation et ceci à différente puissance. Il apparait alors que la description usuelle de la FM ne puisse plus être utilisée dans notre cas, car la fréquence de modulation est trop grande par rapport à la fréquence naturelle. Cela est dû au fait que le vortex met un certain temps à répondre à une excitation. Pour expliquer mes mesures, j'ai donc dû introduire le concept de sensibilité à la déviation, qui correspond à la dépendance de la fréquence de l'oscillateur avec le courant quand celui-ci varie périodiquement. / Since 2004, research on radiofrequency (RF) spintronic devices has been very active, both from a fundamental point of view as well as for their potential applications as RF oscillators or spin-diodes. These devices are based on spin transfer torque (STT). In this context, I studied vortex oscillators based on ultra-low resistance magnetic tunnel junctions in which vortex dynamics is driven into a periodic motion by STT. The vortex oscillations are observed when the junction is subjected to a large dc bias current and a low in-plane field. The dc current produces both a large Oersted field which contributes to the vortex nucleation and a STT that starts the vortex oscillation. This oscillation leads to a large output power up to 20nW with a fundamental frequency around 450MHz and many harmonics.Synchronization with an external signal was then tested by adding a RF current to the dc bias current. With a large enough input power, the oscillator locks on the external source: the noise is then drastically reduced and the spectral purity of the signal significantly increases. These observations are explained by describing the system as a parametric oscillator. This model predicts, as experimentally observed, that, for a small amplitude of the RF excitation, a dynamical instability can be more easily reached when its frequency is twice the natural frequency of the oscillator than for any other frequencies.Then, I performed frequency modulation measurements by exciting the dc-biased sample with a low frequency ac-current. The power spectral density was measured as I swept the modulation frequency for various modulation powers. It appears that the description previously used to describe modulation experiments does not apply when the modulation frequency is a significant fraction of the natural frequency. The vortex response time appears to play a significant role, so that the concept of deviation sensitivity has to be introduced to explain the observations: it corresponds to the dynamical dependence of the oscillator frequency with an applied current that varies with time.
|
Page generated in 0.1051 seconds