This diploma thesis is focused on synthesis of enantiomeric and diastereomeric pure bispirocyclic compounds via sequential Mannich/hydroamination reaction. The first part is focused on the optimization of reaction conditions of enantioselective asymmetric organocatalytic Mannich reaction of pyrazolone derivatives with isatin-derived ketimines. The enantiomerically enriched Mannich adducts were used in hydroamination cyclization. The second part of the work is focused on finding the suitable reaction conditions for performing the Mannich reaction and hydroamination as a sequential reaction leading to bispirocyclic compounds. The application of sequential reaction and selected transformations of bispirocyclic compounds was also performed. Key words Asymmetric synthesis, organocatalysis, Mannich reaction, hydroamination, sequential reaction, bispirocyclic coumpounds.

No description available.

1. Enantioselective Pd(II)-Catalysed Nucleophilic Additions of 2- Alkylazaarenes The first project deals with enantio- and diastereoselective palladium(II)-catalysed nucleophilic additions of 2-alkylazaarenes to N-Boc imines and nitroalkenes. Under the optimised reaction conditions high levels of diastereo- and enantioselection of the addition products were achieved. Introduction of the electron-withdrawing group at the aryl ring of the substrate allows running the reaction under mild, experimentally convenient reaction conditions. The new described method allows the enantioselective synthesis of 2-(β-aminoalkyl)azaarenes, which are substructures found in drug candidates molecules for the treatment of type 2 diabetes and schizophrenia. 2. Synthesis of Spirocyclic Enones via Rh(III)-Catalysed C–H Functionalisation The second project describes the synthesis of spirocyclic enones by rhodium(III)- catalysed dearomatising oxidative annulation of 2-alkenylphenols with alkynes and 1,3-enynes. A good to high yield with great regioselectivity was obtained. The further synthetic utility of the product was also investigated and led to the formation of highly functionalised tetracycles via 1,6 conjugation addition reaction.

This thesis deals with the preparation of enantiomerically and diastereomerically pure spirocompounds using asymmetric organocatalysis. The first part is focused on the enantioselective synthesis of spirocompounds by organocatalytic reaction of α,β-unsaturated aldehydes with sulfur heterocyclic compounds catalysed with secondary amines. It is a domino Michael/Michael/aldol reaction using iminium and enamine activation. The second part is focused on the subsequent transformation of the prepared spirocompounds.

Chiral molecules play a central role in our daily life and in nature, for instance the different enantiomers or diastereomers of a chiral molecule may show completely different biological activity. For this reason, it is a vital goal for synthetic chemists to design selective and efficient methodologies that allow the synthesis of the desired enantiomer. In this context, it is highly important that the concept of green chemistry is considered while designing new approaches that eventually will provide more environmental and sustainable chemical synthesis.The aim of this thesis is to develop the concept of combining transition metal catalysis and aminocatalysis in one process (dual catalysis). This strategy would give access to powerful tools to promote reactions that were not successful with either transition metal catalyst or the organocatalyst alone. The protocols presented in this thesis based on organocatalytic transformations via enamine or iminium intermediates or both, in combination with transition metal catalysis, describes new enantioselective organocatalytic procedures that afford valuable compounds with high chemo- and enantioselectivity from inexpensive commercial available starting materials. In paper I, we present a successful example of dual catalysis: the combination of transition metal activation of an electrophile and aminocatalyst activation of a nucleophile via enamine intermediate. In paper II, the opposite scenario is presented, here the transition metal activates the nucleophile and the aminocatalyst activates the electrophile via an iminium intermediate. In paper III,we present a domino Michael/carbocyclisation reaction that is catalysed by a chiral amine (via iminium/enamine activation) in combination with a transition metal catalysts activation of an electrophile. In paper IV, the concept of dual catalysis was further extended and applied for the highly enantioselective synthesis of valuable structural scaffolds, namely poly-substituted spirocyclic oxindoles. Finally, in paper V the concept of dual catalysis was expanded, by investigating more challenging and environmentally benign processes, such as the successful combination of a heterogeneous palladium and amine catalysts for the highly enantioselective synthesis of functionalised cyclopentenes, containing an all carbonquaternary stereocenter, dihydrofurans and dihydropyrrolidines.

<p>The use of synthetic materials for tissue and organ reconstruction, i. e. tissue engineering, has become a promising alternative to current surgical therapies and may overcome the shortcomings of the methods in use today. The challenge is in the design and reproducible fabrication of biocompatible and bioresorbable polymers, with suitable surface chemistry, desirable mechanical properties, and the wanted degradation profile. These material properties can be achieved in various manners, including the synthesis of homo- and copolymers along with linear and star-shaped architectures. In many applications the materials’ three-dimensional structure is almost as important as its composition and porous scaffolds with high porosity and interconnected pores that facilitate the in-growth of cells and transportation of nutrients and metabolic waste is desired.</p><p>In this work linear and star-shaped polymers have been synthesized by ring-opening polymerization using a stannous-based catalyst and a spirocyclic tin initiator. A series of linear copolymers with various combinations of 1,5-dioxepane-2-one (DXO), Llactide (LLA) and ε-caprolactone (CL) have been polymerized using stannous octoate as catalyst. It is shown that the composition of the polymers can be chosen in such a manner that the materials’ mechanical and thermal properties can be predetermined. A solvent-casting and particulate leaching scaffold preparation technique has been developed and used to create three-dimensional structures with interconnected pores. The achieved physical properties of these materials’ should facilitate their use in both soft and hard tissue regeneration.</p><p>Well defined star-shaped polyesters have been synthesized using a spirocyclic tin initiator where L-lactide was chosen as a model system for the investigation of the polymerization kinetics. Neither the temperature nor the solvent affects the molecular weight or the molecular weight distribution of the star-shaped polymers, which all show a molecular weight distribution below 1.19 and a molecular weight determined by the initial monomer-to-initiator concentration.</p>

Les molécules polycycliques, et notamment les éthers spirocycliques, sont des structures présentant un fort intérêt dans le domaine de la chimie des parfums. Cette thèse est dédiée au développement de nouvelles cycloisomérisations de dérivés d’éthers d’énol catalysées par le triflate de bismuth(III). Une étude bibliographique a ainsi été consacrée aux réactions de cyclisation catalysées par Bi(OTf)3. Une réaction de cycloisomérisation d’éthers d’énol alléniques permettant la formation rapide de produits cyclopenténiques et dihydrofuraniques a été développée. Des dérivés oxaspirocycliques ont été obtenus à partir de substrats trifonctionnels possédant un éther d’énol cyclique et une fonction alcool additionnelle. La chimiodivergence de ces réactions a été étudiée avec l’activation préférentielle de l’allène par des catalyseurs à base d’or(I) menant à d’autres structures cyclopenténiques. Une réaction de double cyclisation a été développée donnant un accès privilégié à des produits polycycliques pontés comportant un motif oxaspirocyclique. Des études mécanistiques ont été effectuées et une nouvelle cyclisation tandem impliquant un transfert d’hydrure-1,5 a été étudiée. La réaction de double cyclisation de dérivés du campholénal énantioenrichis a ensuite été développée pour la formation de bis-éthers tétracycliques et de cétones tricycliques. La plupart de ces nouveaux composés présentent des notes remarquables, principalement dans les familles olfactives aromatiques et boisées. / Polycyclic compounds and more specifically, spirocyclic ethers are of particular interest in fragrance chemistry. This thesis is dedicated to the development of new cycloisomerisations of enol ether derivatives by bismuth(III) triflate catalysis. In this way, a bibliographic study has been carried out on cyclisations catalysed by bismuth(III) triflate. A cycloisomerisation of allenic enol ethers has been developed for the straightforward synthesis of cyclopentene and dihydrofuran derivatives. New oxaspirocyclic compounds have been obtained starting from trifunctional substrates containing a cyclic enol ether and an additional hydroxyl group. The chemodivergence of this reaction has been studied by means of gold(I) catalysis to access different cyclopentenic structures via the preferential activation of the allene. A double cyclisation reaction has been developed leading to bridged polycyclic compounds featuring an oxaspirocyclic moiety. Mechanistic studies have been performed and a tandem cyclisation involving a 1,5-hydride shift has been studied. The double cyclisation of enantioenriched campholenic aldehyde derivatives has been investigated for the formation of tetracyclic diethers and tricyclic ketones. Most of the new compounds presented interesting notes, mainly in the aromatic and woody olfactory family.

Over the last 20 years, asymmetric synthesis has seen considerable progress, particularly in the field of catalysis. In addition to enzyme catalysis and transition metal catalysis, organocatalysis, catalysis using small organic molecules also plays an important role in the asymmetric synthesis. Chiral organocatalysts allow the preparation of structurally interesting and optically pure molecules via various activation modes. This work is focused on the use of organocatalysis based on the formation of hydrogen bonds in organic synthesis. Our study was devoted to the enantioselective organocatalytic reactions of ketimines leading to the formation of chiral vicinal centers. The first part deals with the organocatalytic enantioselective addition reaction of α- fluoro(phenylsulfonyl)methanes to ketimines derived from isatin. The reaction utilizes catalysis of a commercially available quinoline alkaloid cinchonine. A series of enantiomerically pure compounds were prepared containing two neighboring stereocenters in good yields of up to 97%, with diastereoselectivity up to 6: 1 dr and with enantiomeric excesses of 70-98% ee. In most cases pure diastereomers were obtained. In the second part of the work a method of enantioselective orgnocatalytic synthesis of bis-spirocompounds containing two neighboring...

The use of synthetic materials for tissue and organ reconstruction, i. e. tissue engineering, has become a promising alternative to current surgical therapies and may overcome the shortcomings of the methods in use today. The challenge is in the design and reproducible fabrication of biocompatible and bioresorbable polymers, with suitable surface chemistry, desirable mechanical properties, and the wanted degradation profile. These material properties can be achieved in various manners, including the synthesis of homo- and copolymers along with linear and star-shaped architectures. In many applications the materials’ three-dimensional structure is almost as important as its composition and porous scaffolds with high porosity and interconnected pores that facilitate the in-growth of cells and transportation of nutrients and metabolic waste is desired. In this work linear and star-shaped polymers have been synthesized by ring-opening polymerization using a stannous-based catalyst and a spirocyclic tin initiator. A series of linear copolymers with various combinations of 1,5-dioxepane-2-one (DXO), Llactide (LLA) and ε-caprolactone (CL) have been polymerized using stannous octoate as catalyst. It is shown that the composition of the polymers can be chosen in such a manner that the materials’ mechanical and thermal properties can be predetermined. A solvent-casting and particulate leaching scaffold preparation technique has been developed and used to create three-dimensional structures with interconnected pores. The achieved physical properties of these materials’ should facilitate their use in both soft and hard tissue regeneration. Well defined star-shaped polyesters have been synthesized using a spirocyclic tin initiator where L-lactide was chosen as a model system for the investigation of the polymerization kinetics. Neither the temperature nor the solvent affects the molecular weight or the molecular weight distribution of the star-shaped polymers, which all show a molecular weight distribution below 1.19 and a molecular weight determined by the initial monomer-to-initiator concentration. / QC 20101217

Im Fokus dieser Arbeit standen zwei Ziele. Zum einem war es Forschungsgegenstand, dass Konzept der Zwillingspolymerisation auf germaniumhaltige, molekulare Vorstufen wie zum Beispiel Germylene, spirozyklische Germaniumverbindungen und molekulare Germanate zu erweitern und somit organisch-anorganische Komposite beziehungsweise Hybridmaterialien darzustellen. Dazu wurden neuartige Germaniumalkoxide auf der Basis von Benzylalkoholaten, Salicylalkoholaten sowie Benzylthiolaten synthetisiert, charakterisiert und auf ihre Fähigkeit Komposite beziehungsweise Hybridmaterialien über den Prozess der Zwillingspolymerisation zu erhalten studiert. Ein zweites Ziel dieser Arbeit war es, Beziehungen zwischen der Struktur und der Reaktivität dieser molekularen Vorstufen sowie deren Einfluss auf die Eigenschaften der erhaltenen Polymerisationsprodukte zu identifizieren und systematisch zu untersuchen. Hierfür wurden zum einen verschiedene Substituenten, welche unterschiedliche elektronische sowie sterische Eigenschaften aufweisen, an den aromatischen Einheiten der molekularen Vorstufen eingeführt. Die Effekte der Substituenten auf den Prozess der Zwillingspolymerisation und auf die Eigenschaften der Komposite beziehungsweise Hybridmaterialien wurden für die Verbindungsklasse der Germanium(II)salicylalkoholate, der molekularen Germanate sowie der spiro-zyklischen Siliziumsalicylalkoholate untersucht. Spirozyklische Siliziumsalicylalkoholate, wie zum Beispiel 4H,4’H-2,2‘-Spirobi[benzo[d][1,3,2]dioxasilin], wurden im Rahmen dieser Arbeit mit einbezogen, da sie aufgrund ihres nahezu idealen Zwillingspolymerisationsprozesses geeignete Modelverbindungen für Reaktivitätsstudien darstellen. Zudem wurde der Einfluss der Substituenten auf die Charakteristika der aus den Kompositen beziehungsweise Hybridmaterialien erhaltenen Folgeprodukte (poröse Kohlenstoffmaterialien und oxydische Materialien) studiert. Des Weiteren wurde eine Serie von spirozyklischen Germaniumthiolaten, welche isostrukturell zu 4H,4’H-2,2‘-Spirobi[benzo[d][1,3,2]dioxasilin] sind, synthetisiert, um systematisch den Einfluss der Chalkogenide, Sauerstoff und Schwefel, in benzylständiger sowie phenylständiger Position auf deren Reaktionsvermögen im Polymerisationsprozess zu untersuchen. Die experimentellen Ergebnisse zu den Struktur-Reaktivitätsbeziehungsstudien wurden, soweit es jeweils durchführbar war, mittels quantenchemische Rechnungen validiert und die daraus gezogenen Schlüsse in die Diskussion zur Interpretation der experimentellen Ergebnisse mit einbezogen.