1 |
Sistemas microestruturados contendo extratos de Chamomilla recutita L. para aplicações dermocosméticas / Microstructured systems containing Chamomilla recutita L. extract for dermocosmetic applicationsPereira, Simone Vieira 24 April 2015 (has links)
A Chamomilla recutita L. é uma das plantas medicinais mais cultivadas no Brasil e no mundo. Os extratos da C. recutita são de interesse para as indústrias farmacêuticas e cosméticas, visto que estes apresentam atividades anti-inflamatória, antioxidante e adstringente. A ação terapêutica do extrato pode ser mais pronunciada que a ação terapêutica de um de seus ativos isolados. No entanto, a incorporação de um extrato em uma formulação pode ser difícil devido à baixa estabilidade dos extratos, bem como à possibilidade de gerarem instabilidade das formulações. Microencapsulando o extrato com um carreador é possível aumentar estabilidade do extrato quanto evitar instabilidade na formulação. Além disso, a microencapsulação é capaz de fornecer outras vantagens, como uma liberação controlada. Dois processos foram estudados como alternativas para a microencapsulação do óleo essencial e do extrato hidroalcoólico da C. recutita usando quitosana como carreador: o spray drying e o spray freeze drying. Planejamentos fatorais foram utilizados para determinar os fatores que mais influenciaram no diâmetro médio das micropartículas, eficiência de encapsulação e teor dos marcadores e rendimento do processo. A apigenina e a apigenina-7-glicosídeo foram usadas como marcadores do extrato hidroalcoólico e o óxido de bisabolol A foi usado como marcador do óleo essencial. Os processos de spray drying e spray freeze drying dos dois extratos foram otimizados e as micropartículas resultantes foram caracterizadas com relação ao diâmetro médio, rendimento do processo, teor e eficiência de encapsulação dos marcadores, atividade antioxidante in vitro, densidade, índice de Carr, fator de Hausner, umidade, morfologia, perfil de liberação n vitro e estabilidade. Os resultados mostraram que o processo de spray drying apresentou os melhores resultados para eficiência de encapsulação, com valores de aproximadamente 98%, 95% e 80% para apigenina, apigenina-7-glicosídeo e óxido de bisabolol A, respectivamente. As eficiências de encapsulação obtidas no processo de spray freeze drying foram de aproximadamente 59%, 58% e 38% para os mesmos marcadores, respectivamente. As micropartículas produzidas por spray freeze drying apresentaram formato irregular e poroso, enquanto as produzidas por spray drying apresentaram formato esférico e superfícies mais lisas, sem poros ou fissuras. Ao contrário do que ocorreu com o extrato hidroalcoólico, a perda do marcador do óleo foi elevada no processo de spray drying, com teor final de 35%. Os teores dos marcadores ficaram acima de 80% para o processo de spray freeze drying do óleo e acima de 90% para o extrato hidroalcoólico. As micropartículas produzidas por spray drying do extrato hidroalcoólico e do óleo e por spray freeze drying do extrato hidroalcoólico e do óleo apresentaram diâmetro médio de 5,1 ?m, 5,0 ?m, 31,0 ?m e 96,4 ?m, respectivamente. Ensaios de liberação in vitro mostraram que as micropartículas foram capazes de sustentar a liberação dos respectivos marcadores. Os estudos de permeação in vitro das micropartículas produzidas por spray drying do extrato hidroalcoólico também mostraram que estas foram capazes de sustentar a liberação. A microencapsulação proporcionou em todos os casos um aumento considerável da estabilidade. As micropartículas produzidas por spray drying do extrato hidroalcoólico apresentaram teores de marcadores no mínimo 50% maiores que o extrato puro após 90 dias. O spray freeze drying se mostrou como a melhor alternativa para produção de micropartículas de quitosana contendo o óleo essencial de C. recutita, enquanto o processo de spray drying se mostrou como uma ótima alternativa para microencapsulação do extrato hidroalcoólico da C. recutita. / Chamomilla recutita L. is one of the most cultivated medicinal plants in Brazil and around the world. Its extracts are important to both the pharmaceutical and cosmetics industries due to its therapeutic applications, such as an anti-inflammatory, antioxidant, and astringent. The therapeutic effects of an extract may be more pronounced than those of an isolated active compound. However, the incorporation of an extract in a formulation is difficult due to the low stability of extracts and the potential instabilities they may cause in formulations. Microencapsulating an extract in a carrier is a potential way of increasing the stability of an extract and avoiding instabilities in a formulation. Compound microencapsulation also brings other advantages, such as controlled release rates. Two processes were studied as alternatives to microencapsulating C. recutita essential oil and C. recutita hydroalcoholic extract using chitosan as a carrier: spray drying and spray freeze drying. Factorial designs were used to determine which process factors most influence the mean diameter, encapsulation efficiency and content of the chemical markers, and process yield. Apigenin and apigenin-7-glucoside were used as chemical markers for the hydroalcoholic extract and bisabolol oxide A was used as the chemical marker for the essential oil. The spray drying and spray freeze drying processes for both the oil and hydroalcoholic extract were optimized and the resulting microparticles were further characterized to determine mean diameter, process yield, marker encapsulation efficiency and content, in vitro antioxidant activity, density, Carr index, Hausner factor, water content, morphology, in vitro release profiles and stability. The results showed spray drying had the best encapsulation efficiency results, with about 98%, 95% e 80% of the apigenin, apigenin-7-glucoside and bisabolol oxide A content, respectively, inside the microparticles. The encapsulation efficiencies obtained in the spray freeze drying process were about 59%, 58% e 38% for the same chemical markers, respectively. Microparticles produced by spray freeze drying were irregular and porous, whereas microparticles produced by spray drying were spherical and fairly smooth, without porous or cracks. Contrary to what happened with the hydroalcoholic extract, oil marker content was low for spray dried microparticles, with final content at 35%. Chemical markers contents were above 80% for the oil and above 90% for the hydroalcoholic extract in spray freeze dried microparticles. Spray dried microparticles containing extract and oil and spray freeze dried microparticles containing extract and oil had mean diameter of 5.1 ?m, 5.0 ?m, 31.0 ?m and 96.4 ?m, respectively. In vitro release profiles showed all microparticles were able to sustain their respective marker release rates. In vitro permeation studies of spray dried microparticles containing hydroalcooholic extract also showed sustained release rates for the corresponding markers. Microencapsulation also provided considerable increase in C. recutita hydroalcoholic extract stability and C. recutita essential oil stability. After 90 days spray dried microparticles containing hydroalcoholic extract presented marker content 50% higher than the pure hydroalcoholic extract. Spray freeze drying was the best alternative to produce chitosan microparticles containing C. recutita essential oil, while spray drying was shown to be an excellent way to microencapsulate C. recutita hydroalcoholic extract in chitosan.
|
2 |
Sistemas microestruturados contendo extratos de Chamomilla recutita L. para aplicações dermocosméticas / Microstructured systems containing Chamomilla recutita L. extract for dermocosmetic applicationsSimone Vieira Pereira 24 April 2015 (has links)
A Chamomilla recutita L. é uma das plantas medicinais mais cultivadas no Brasil e no mundo. Os extratos da C. recutita são de interesse para as indústrias farmacêuticas e cosméticas, visto que estes apresentam atividades anti-inflamatória, antioxidante e adstringente. A ação terapêutica do extrato pode ser mais pronunciada que a ação terapêutica de um de seus ativos isolados. No entanto, a incorporação de um extrato em uma formulação pode ser difícil devido à baixa estabilidade dos extratos, bem como à possibilidade de gerarem instabilidade das formulações. Microencapsulando o extrato com um carreador é possível aumentar estabilidade do extrato quanto evitar instabilidade na formulação. Além disso, a microencapsulação é capaz de fornecer outras vantagens, como uma liberação controlada. Dois processos foram estudados como alternativas para a microencapsulação do óleo essencial e do extrato hidroalcoólico da C. recutita usando quitosana como carreador: o spray drying e o spray freeze drying. Planejamentos fatorais foram utilizados para determinar os fatores que mais influenciaram no diâmetro médio das micropartículas, eficiência de encapsulação e teor dos marcadores e rendimento do processo. A apigenina e a apigenina-7-glicosídeo foram usadas como marcadores do extrato hidroalcoólico e o óxido de bisabolol A foi usado como marcador do óleo essencial. Os processos de spray drying e spray freeze drying dos dois extratos foram otimizados e as micropartículas resultantes foram caracterizadas com relação ao diâmetro médio, rendimento do processo, teor e eficiência de encapsulação dos marcadores, atividade antioxidante in vitro, densidade, índice de Carr, fator de Hausner, umidade, morfologia, perfil de liberação n vitro e estabilidade. Os resultados mostraram que o processo de spray drying apresentou os melhores resultados para eficiência de encapsulação, com valores de aproximadamente 98%, 95% e 80% para apigenina, apigenina-7-glicosídeo e óxido de bisabolol A, respectivamente. As eficiências de encapsulação obtidas no processo de spray freeze drying foram de aproximadamente 59%, 58% e 38% para os mesmos marcadores, respectivamente. As micropartículas produzidas por spray freeze drying apresentaram formato irregular e poroso, enquanto as produzidas por spray drying apresentaram formato esférico e superfícies mais lisas, sem poros ou fissuras. Ao contrário do que ocorreu com o extrato hidroalcoólico, a perda do marcador do óleo foi elevada no processo de spray drying, com teor final de 35%. Os teores dos marcadores ficaram acima de 80% para o processo de spray freeze drying do óleo e acima de 90% para o extrato hidroalcoólico. As micropartículas produzidas por spray drying do extrato hidroalcoólico e do óleo e por spray freeze drying do extrato hidroalcoólico e do óleo apresentaram diâmetro médio de 5,1 ?m, 5,0 ?m, 31,0 ?m e 96,4 ?m, respectivamente. Ensaios de liberação in vitro mostraram que as micropartículas foram capazes de sustentar a liberação dos respectivos marcadores. Os estudos de permeação in vitro das micropartículas produzidas por spray drying do extrato hidroalcoólico também mostraram que estas foram capazes de sustentar a liberação. A microencapsulação proporcionou em todos os casos um aumento considerável da estabilidade. As micropartículas produzidas por spray drying do extrato hidroalcoólico apresentaram teores de marcadores no mínimo 50% maiores que o extrato puro após 90 dias. O spray freeze drying se mostrou como a melhor alternativa para produção de micropartículas de quitosana contendo o óleo essencial de C. recutita, enquanto o processo de spray drying se mostrou como uma ótima alternativa para microencapsulação do extrato hidroalcoólico da C. recutita. / Chamomilla recutita L. is one of the most cultivated medicinal plants in Brazil and around the world. Its extracts are important to both the pharmaceutical and cosmetics industries due to its therapeutic applications, such as an anti-inflammatory, antioxidant, and astringent. The therapeutic effects of an extract may be more pronounced than those of an isolated active compound. However, the incorporation of an extract in a formulation is difficult due to the low stability of extracts and the potential instabilities they may cause in formulations. Microencapsulating an extract in a carrier is a potential way of increasing the stability of an extract and avoiding instabilities in a formulation. Compound microencapsulation also brings other advantages, such as controlled release rates. Two processes were studied as alternatives to microencapsulating C. recutita essential oil and C. recutita hydroalcoholic extract using chitosan as a carrier: spray drying and spray freeze drying. Factorial designs were used to determine which process factors most influence the mean diameter, encapsulation efficiency and content of the chemical markers, and process yield. Apigenin and apigenin-7-glucoside were used as chemical markers for the hydroalcoholic extract and bisabolol oxide A was used as the chemical marker for the essential oil. The spray drying and spray freeze drying processes for both the oil and hydroalcoholic extract were optimized and the resulting microparticles were further characterized to determine mean diameter, process yield, marker encapsulation efficiency and content, in vitro antioxidant activity, density, Carr index, Hausner factor, water content, morphology, in vitro release profiles and stability. The results showed spray drying had the best encapsulation efficiency results, with about 98%, 95% e 80% of the apigenin, apigenin-7-glucoside and bisabolol oxide A content, respectively, inside the microparticles. The encapsulation efficiencies obtained in the spray freeze drying process were about 59%, 58% e 38% for the same chemical markers, respectively. Microparticles produced by spray freeze drying were irregular and porous, whereas microparticles produced by spray drying were spherical and fairly smooth, without porous or cracks. Contrary to what happened with the hydroalcoholic extract, oil marker content was low for spray dried microparticles, with final content at 35%. Chemical markers contents were above 80% for the oil and above 90% for the hydroalcoholic extract in spray freeze dried microparticles. Spray dried microparticles containing extract and oil and spray freeze dried microparticles containing extract and oil had mean diameter of 5.1 ?m, 5.0 ?m, 31.0 ?m and 96.4 ?m, respectively. In vitro release profiles showed all microparticles were able to sustain their respective marker release rates. In vitro permeation studies of spray dried microparticles containing hydroalcooholic extract also showed sustained release rates for the corresponding markers. Microencapsulation also provided considerable increase in C. recutita hydroalcoholic extract stability and C. recutita essential oil stability. After 90 days spray dried microparticles containing hydroalcoholic extract presented marker content 50% higher than the pure hydroalcoholic extract. Spray freeze drying was the best alternative to produce chitosan microparticles containing C. recutita essential oil, while spray drying was shown to be an excellent way to microencapsulate C. recutita hydroalcoholic extract in chitosan.
|
3 |
Spray freeze drying of nanozirconia powdersZhang, Yifei January 2014 (has links)
Nanozirconia ceramics have great potential to be used in a range of applications from dental implants to petrochemical valves due to their enhanced mechanical properties and superior hydrothermal ageing resistance. Unlike conventional ceramic components that are normally produced in large quantities with low costs using various conventional dry forming or wet forming methods, industry scale processing of nanoceramics has not yet been achieved. Concentration and granulation of nanostructured 3 mol% yttria stabilised zirconia via a spray freeze drying (SFD) technique was investigated to determine whether large scale dry forming of nanoceramics would be possible. Commercial nanosuspension with a primary particle size of 16 nm was concentrated to 55 wt% solids content using an electrosteric dispersant, β-alanine, whilst retaining low viscosities of ~20 mPa s at a 200 s-1 shear rate. The nanosuspensions concentrated using the β-alanine also displayed good ageing resistance and it has been proven that a large scale vacuum assisted rotary evaporator can be used to perform concentration in industry.
|
4 |
Synthesis and processing of nanostructured alumina ceramicsGhanizadeh, Shaghayegh January 2013 (has links)
The term Nanoceramics is well known in the ceramic field for at least two decades. In this project a detailed study was performed on the synthesis of α-alumina nanopowders. High solids content nanoalumina suspensions were prepared and used to form green bodies using both wet and dry forming routes. The green bodies were then sintered using both conventional single and two-step sintering approaches. Synthesis: Two different synthesis methods, viz. precipitation and hydrothermal treatment, were used to synthesize fine α-alumina powders from aluminium chloride, ammonia solution and TEAH (Tetraethyl ammonium hydroxide). XRD, TEM and FEG-SEM were used to characterise the powders produced. The presence of commercial α-alumina powder as seed particles did not affect the transformation to α-alumina phase during the hydrothermal treatment at 220˚C in either basic or acidic environments. The results obtained from the precipitation route showed that the combined effect of adding α-alumina seeds and surfactants to the precursor solution could lower the transformation temperature of α-alumina from about 1200˚C for unseeded samples to 800˚C, as well as reducing the level of agglomeration in the alumina powders. The difference in transformation temperature mainly resulted from the nucleation process by the α-alumina seeds, which enhanced the θ → α transformation kinetics. The lower level of agglomeration present in the final powders could be due to the surface modifying role of the surfactants preventing the particles from growing together during the synthesis process. By introducing a further high-temperature step for a very short duration (1 minute) to the low-temperature heat treatment route (800˚C/12 h), the unseeded sample with added surfactant transformed into pure α-alumina phase. The newly-added step was shown to be an in-situ seeding step, followed by a conventional nucleation and growth process. The best final powder was compared with a commercial α-alumina nanopowder. Processing of alumina ceramics: The effect of low-molecular weight ammonium dispersants including Dispex-A40, Darvan-C and Dolapix-CE64, on high solids content nanoalumina suspensions was investigated. The nanosuspension prepared using the most suitable dispersant, Dolapix-CE64, was slip cast into ~53% dense, very homogeneous green bodies. This nanosuspension was also spray freeze dried into crushable granules using Freon as a foaming agent. Green compacts with density of ~53.5% were then formed by dry pressing the 2 vol% Freon-added spray freeze dried granules at 40 MPa. Both slip cast and die pressed green bodies were sintered using conventional single-step and two-step routes followed by characterising the density and grain size measurement of final dense compacts. The results have been compared with that of a submicron alumina ceramic prepared using a commercial α-alumina suspension. Highly dense alumina with an average grain size of ~0.6 μm was fabricated by means of spark plasma sintering at 1200˚C. The application of 500 MPa allowed achieving almost fully dense alumina at temperature as low as 1200˚C for 30 minutes with no significant grain growth.
|
5 |
Needle-free vaccination : formulation and dermal delivery of diphtheria toxin CRM197 mutantWeissmueller, Nikolas T. January 2013 (has links)
The unsafe use of needles propagates cross infections with bloodborne pathogens and reduces the positive impact of vaccinations on global health. While a plethora of needle-free injection devices exist, the reformulation of protein-based vaccines is largely empirical and costly, which presents a barrier to their widespread clinical application. This thesis contributes to the identification of approaches that facilitate rapid vaccine reformulation and enhance the immunogenicity of needle-free dry-powder vaccines with the help of novel antigen delivery platforms. We hypothesised that the thermodynamic stabilisation of diphtheria toxin mutant 197 (CRM197), a glycoconjugate vaccine carrier protein, may enhance its structural preservation during spray-freeze-drying (SFD), and that its formulation in either soluble, surface-adsorbed, or nanoparticle form impacts the elicited immune response. Differential scanning fluorimetry was used to study the effect of excipients on the thermal stability of CRM197. Dry-powder formulation of CRM197 used i) encapsulation into a thermodynamically stabilising excipient matrix by SFD, ii) surface-immobilisation via physisorption onto a novel potassium-doped hydroxyapatite (kHA) carrier microparticle formed by molten salt synthesis, and iii) chemical conjugation and surface presentation on amphiphilic block copolymer nanoparticles that were incorporated into SFD-powders (SFD-NP). The structural integrity of CRM197 was assessed by size separation in addition to various spectral and thermal analysis methods. The immunogenicity of dry-powder CRM197 formulations was subsequently tested in vivo. The results suggest that the thermodynamic stability of CRM197 in solution does not ensure its structural stability during SFD. While needle-free dermal vaccination with kHA-adsorbed CRM197 induced comparable antibody titres to conventional IM injection of alum-adjuvanted CRM197, needle-free SFD and SFD-NP powders were less immunogenic. The highest mean IgG titre and most balanced Th1/Th2 response was achieved with nanoparticle-conjugated CRM197 by IM, which outperformed the current clinical standard. Therefore, future vaccine design should combine thermodynamic and kinetic stability screening, and place special emphasis on the delivery and structural presentation of the antigen to the immune system.
|
6 |
Développement de matériaux super-isolants thermiques à partir de nano-fibres de cellulose / Development of thermal super-insulating materials from nano-cellulose fibersJimenez Saelices, Clara 04 November 2016 (has links)
L'objectif de cette thèse est la préparation d’aérogels biosourcés ayant des propriétés de super-isolation thermique. Pour cela, nous avons choisi de développer de nouveaux aérogels à base de nanofibres de cellulose (NFC). Les aérogels ont été préparés par lyophilisation. Dans un premier temps, une analyse des paramètres expérimentaux jouant un rôle sur la morphologie et les propriétés physico-chimiques des aérogels a été réalisée afin d’obtenir les meilleures propriétés d’isolation thermique. Avec une suspension de NFC à 2% en masse, sans ajout de sels et sans faire varier le pH, une lyophilisation réalisée dans des moules d’aluminium à une température de -80°C a permis d’obtenir des aérogels ayant une conductivité thermique de 0,024 W/m.K. Afin de diminuer cette conductivité thermique, nous avons choisi de réduire la taille des pores pour obtenir un effet Knudsen. Pour cela, une nouvelle technique de séchage a été proposée : la lyophilisation par pulvérisation. Les aérogels préparés dans les mêmes conditions expérimentales que précédemment avec cette technique ont des propriétés thermiques super-isolantes (0,018 W/m.K) grâce à la nano-structuration du réseau poreux. Finalement, un nouveau dispositif expérimental a été développé pour caractériser plus finement les propriétés thermiques des aérogels. C’est un dispositif transitoire impulsionnel qui permet d'estimer simultanément la contribution de la conduction solide et gazeuse, l'effet radiatif et la diffusivité thermique grâce à un modèle théorique simple. Ce dispositif permettra d’approfondir l’étude complexe du transfert thermique à travers des matériaux poreux semi-transparents tels que les aérogels. / The objective of this thesis is the preparation of renewable aerogels having thermal super-insulating properties. To do it, we designed new aerogels from nanofibrillated cellulose (NFC) by freeze-drying. This technique is simple and has the advantage of not using organic solvents. First of all, the parameters playing a role on the aerogel morphology and physico-chemical properties of the aerogels were analyzed to get the best thermal insulating properties. Using 2 wt% NFC suspensions, without addition of salts, keeping the initial pH, the obtained freeze-dried aerogels in alumina molds at -80 °C have a thermal conductivity of 0.024 W/m.K. In order to reduce the pore size and to improve the thermal insulating properties by Knudsen effect, a new drying technique was proposed: the spray freeze-drying. Aerogels prepared in the same experimental conditions with this technique have thermal super-insulating properties (0.018 W/m.K) thanks to the nanostructuration of the porous network. Finally, a new device was designed to characterize more precisely the thermal properties of aerogels. This is an impulsive transient device, which can estimate simultaneously the contribution of solid and gas conduction, the radiative effect and thermal diffusivity using a simple theoretical model. This device will allow studying complex heat transfer through porous semi-transparent materials such as aerogels
|
7 |
EFFECTS OF FORMULATION COMPONENTS AND DRYING TECHNIQUES ON STRUCTURE AND PHYSICAL STABILITY OF PROTEIN FORMULATIONSTarun Tejasvi Mutukuri (11581819) 22 April 2022 (has links)
<p> </p>
<p>With the recent growth in demand for biologics across the globe, it remains critical to manufacture these biologics in solid-state to improve stability as well as to increase the ease of transportation across the world. To meet these increased demands, it is of paramount importance to use various processing methods that have shorter processing times. It is also important to understand the impact of the processing methods and various formulation components on the stability of the proteins. In Chapter 1, a review of the various processing methods that are used in the industry along with additional processing methods that are being investigated will be discussed. The common drying methods such as lyophilization and spray drying along with the novel techniques as well as specific examples of processing parameters to improve the processing conditions that better suit the protein formulations will be mentioned. </p>
<p>The studies in Chapter 2 examined the effects of processing methods (freeze drying and spray freeze drying) and the excipients on the protein structure and physical stability. Protein solids containing one of two model proteins (lysozyme or myoglobin) were produced with or without excipients (sucrose or mannitol) using freeze drying or spray freeze drying (SFD). The protein powders were then characterized using solid-state Fourier transform infrared spectroscopy (ssFTIR), differential scanning calorimetry (DSC), circular dichroism spectrometry (CD), size exclusion chromatography (SEC), BET surface area measurements, and solid-state hydrogen-deuterium exchange with mass spectrometry (ssHDX-MS). ssFTIR and CD could identify little to no difference in the structure of the proteins in the formulation. ssHDX-MS was able to identify the population heterogeneity, which was undetectable by conventional characterization techniques of ssFTIR and CD. ssHDX-MS metrics such as Dmax and peak area showed a good correlation with the protein physical instability (loss of the monomeric peak area by size exclusion chromatography) in 90-day stability studies conducted at 40oC for lysozyme. The higher specific surface area was associated with greater loss in monomer content for myoglobin-mannitol formulations as compared to myoglobin-only formulations. Spray freeze drying seems a viable manufacturing technique for protein solids with appropriate optimization of formulations. The differences observed within the formulations and between the processes using ssHDX-MS, BET surface area measurements, and SEC in this study provide an insight into the influence of drying methods and excipients on protein physical stability.</p>
<p>Based on this work, it was identified that spray freeze drying can be a viable alternative to produce solid-state protein formulations with similar stability as the freeze drying process. However, due to the long processing times and scale-up issues involved in the spray freeze drying process, there is a necessity to explore additional drying processes. Chapter 3 focuses on using another novel technique known as electrostatic spray drying (ESD) to produce solid-state protein formulations at lower drying temperatures than conventional spray drying and its effect on protein stability. A mAb formulation was dried by either conventional spray drying or electrostatic spray drying with charge (ESD). The protein powders were then characterized using solid-state Fourier transform infrared spectroscopy (ssFTIR), differential scanning calorimetry (DSC), size exclusion chromatography (SEC), and solid-state hydrogen/deuterium exchange with mass spectrometry (ssHDX-MS). Particle characterizations such as BET surface area, particle size distribution, and particle morphology were also performed. Conventional spray drying of the mAb formulation at the inlet temperature of 70oC failed to generate dry powders due to poor drying efficiency; electrostatic spray drying at the same temperature at 5kV enabled the formation of powder formulation with satisfactory moisture contents. Deconvoluted peak areas of deuterated samples from the ssHDX-MS study showed a good correlation with the loss of the monomeric peak area measured by size exclusion chromatography in the 90-day accelerated stability study conducted at 40oC. Low-temperature (70oC inlet temperature) drying with an electrostatic charge (5kV) led to better protein physical stability as compared with the samples spray-dried at the high temperature (130oC inlet temperature) without charge.</p>
<p>This study shows that electrostatic spray drying can produce solid monoclonal antibody formulation at a lower inlet temperature than traditional spray drying with better physical stability. While ESD can be a viable option for thermal-sensitive formulations, it is important to understand the impact of various formulation components on the stability of the proteins while using spray drying. Based on our previous studies, a good understanding of the effect of different sugars and the presence of surfactants on the spray-dried proteins has been established. However, the impact of the selection of buffer on protein stability has not been studied. In Chapter 4, the effect of buffer salts on the physical stability of spray dried and lyophilized formulations of a model protein, bovine serum albumin (BSA) were examined. BSA formulations with various buffers were dried by either lyophilization or spray drying. The protein powders were then characterized using solid-state Fourier transform infrared spectroscopy (ssFTIR), powder X-ray diffraction (PXRD), size exclusion chromatography (SEC), solid-state hydrogen/deuterium exchange with mass spectrometry (ssHDX-MS), and solid-state nuclear magnetic resonance spectroscopy (ssNMR). Particle characterizations such as BET surface area, particle size distribution, and particle morphology were also performed. Results from conventional techniques such as ssFTIR did not exhibit correlations with the physical stability of studied formulations. Deconvoluted peak areas of deuterated samples from the ssHDX-MS study showed a satisfactory correlation with the loss of the monomeric peak area measured by SEC (R2 of 0.8722 for spray-dried formulations and 0.8428 for lyophilized formulations) in the 90-day accelerated stability study conducted at 40oC. PXRD was unable to measure phase separation in the samples right after drying. In contrast, ssNMR successfully detected the occurrence of phase separation between the succinic buffer component and protein in the lyophilized formulation, which results in a distribution of microenvironmental acidity and the subsequent loss of long-term stability. In summary, this study demonstrated that buffer salts have less impact on physical stability for the spray-dried formulations than the lyophilized solids.</p>
<p>The study in Chapter 5 looked at examining the physical stability of spray freeze dried (SFD) bovine serum albumin (BSA) solids produced using the radio frequency (RF)-assisted drying technique. BSA formulations were prepared with varying concentrations of trehalose and mannitol, with an excipient-free formulation as control. These formulations were produced using traditional spray freeze drying (SFD) or RF-assisted spray freeze drying (RFSFD). The dried formulations were then characterized using solid-state Fourier transform infrared spectroscopy (ssFTIR), Karl Fischer moisture content measurement, powder X-ray diffraction (PXRD), size exclusion chromatography (SEC), solid-state hydrogen/deuterium exchange with mass spectrometry (ssHDX-MS). Traditional characterization tools such as ssFTIR and moisture content did not have a good correlation with the physical stability of the formulations measured by SEC. ssHDX-MS metrics such as the maximum deuterium uptake (Dmax) (R2 = 0.791) and deconvoluted peak areas of the deuterated samples (R2 = 0.914) showed a satisfactory correlation with the SEC stability data. RFSFD improved the stability of formulations with 20 mg/ml of trehalose and no mannitol and had similar stability with all other formulations as compared to SFD. This study demonstrated that the RFSFD technique can significantly reduce the duration of primary drying cycle from 48 h to 27.5 h while maintaining or improving protein physical stability as compared to traditional lyophilization.</p>
<p>Lastly, Chapter 6 consists of a summary of the conclusions formed from the work presented in this thesis. Furthermore, suggestions for future work are provided based on observations of results, less-explored areas of formulation and processing conditions as well as characterization tools to understand effects on protein physical stability.</p>
<p><br></p>
|
Page generated in 0.1029 seconds