The thesis aimed to examine the problem of excessive moisture in existing buildings and to design a suitable construction and technological procedure including the analysis of particular options and their economic analysis. For this purpose I chose a particular family house with excessive moisture. I elaborated basic characteristics of the building, where I described the age of all parts affected by moisture. Next I described used material, that was incorporated into the ground plan of the house. To make a complex view I described the surroundings of the building as well. Apart from that I worked out a basic reconnaissance of the bedrock, which included the analysis of radon threat analysis. Furthermore, I described the moisutre manifestations in the building and their possible causes. Based on this analysis I suggested a construction and technological procedures consisting of two solution options, which were in detail described and incorporated into the ground plan of the building. I calculated the costs of both solutions and finally the most suitable solution was chosen with a corresponding proper explanation.

The aim of the diploma thesis was the elaboration of a study of the rehabilitation of the sewerage network in the part of the town of Znojmo. The work is conceived in the form of accompanying and technical reports. The accompanying report contains a brief description of the interest site, basic information about the sewerage system operator and land data. The technical report contains a description of the individual segments of the sewer network, supplemented by photo documentation of the selected faults located on the selected sections. In addition, the evaluation of the structural state of the sub-sections is carried out here. The following subchapter draws up two hydraulic models and their modifications after the recovery of the sewer system. Another part of the technical report describes possible options for remediation technologies. The last part deals with the conclusions and recommendations for the sewer network operator including a briefly outlined economic page in the selection of remediation technology.

In this thesis there are main parts of the building and technological project of The apartment building Miroslav. There is technical report on on the technological project, studies of major technological stages, site equipment project, design of building machines and mechanisms, time plan, inspections and test plan.

Thesis deals about the building structural condition of the building in Šlapanice, street Riegrova 1238/21. Methods of diagnostic survey are suitably chosen, then realized and evaluated. From these results is done structural calculation of bricks pillar in first-floor. We reached to the conclusion, that the most suitable solution is demolition of this existing object and build the new one.

The main goal of this diploma thesis is diagnostics and vocational training in assessment of existing structure of the center of leisure time for children. The teoretical part is focused on vocational training in assessment of existing structures by ČSN ISO 13 822 - Bases for design of structures - Assessment of existing structures and assesment of brick structures. The designing strength of masonry and mortar is defined in the end of theoretical part. The practical part continues with real construction, where diagnostic methods based on technical survey are applied and in the end describes present state of real construction with plan for required steps to secure safety. As a result of this thesis is also a demonstration static report.

The diploma thesis is focused on Storm water management in urban areas. The first task for processing thesis was to arrange meeting with MČ Brno - Bohunice Ing. Antonín Crha, who has provided necessary information about the targeted location the and the reservoir for accumulation of rainwater collected. The practical part of the thesis is to capture the rainwater drainage in the existing rainwater sewerage system using the newly built pumping station and then pumping into the existing, unused reservoir. Accumulated water in the reservoir is planned to be used for the needs of the city, gardeners and other customers. The first part of the diploma thesis describes the management of refined water in the Czech Republic, Denmark and Germany. The first part also provides description of measures and technologies for the management of rainwater. Finally, there is description of the pumping station and borehole objects and the program for calculating the rainfall from the urbanized area. In the practical part of the diploma thesis the selected variants are described, rewarded and evaluated. The diploma thesis deals with two variants, that are guided along the same route, with the difference of the construction of the drilled well in the second variant. Both variants are handled by pumping. The option of the gravity inflow was rejected because of the large countersink of rainwater sewerage.

The aim of this diploma thesis is the processing of selected parts of the construction technology project for the New office and manufacturing building of GRADIOR TECH a.s. The building is located in the Královopolská industrial park in Brno - Královo pole. The construction is divided into 6 buildings. The indicative time and financial plan focuses on the building as a whole. Furthermore, the diploma thesis focuses in detail on the construction technology project project in detail on the building of the office building, which is based on drilled piles. On these piles, the cup feet for pillar fitting are placed on which the beams are fitted together with frames and ceiling panels. The building is diverse and contains both prefabricated and monolithic structures.

This master's thesis deals with the construction technology project solution of the Trade centre building. This thesis consists of a comprehensive elaborate project of implementation including the schedule and calculation, two technological regulations of operations, main mechanisms and risks connected with the realization itself. Logistics of resources, construction side and procedures needed for realization are processed as well.

This master´s thesis discusses the construction technological project of the newly built multifunctional building in the Česká Skalice focusing on the selected technological phases. Speciffically it is the implementation of the earthworks and the bricklaying using the TRESK brick system. For these technological steps are processed all documents that is necessary for their implementation. There are detailed elaboration of the timescales and financial plans for construction of the main building structure in this project.

The master’s thesis discusses the technological project for the reconstruction of school Chaloupky o.p.s in the countryside near Třebíče. Basic data about the building of the project are included in the technical report. The thesis deals in detail with the technological regulations Hurdis ceilings and reconstruction of arches. For these selected topics are made other documents which are needed for realization - building equipment, plan of health and safety, kontrol and test plans, draft of mechanization. The project also includes the time and financial plans and budgets for the main building. The project is supllied with selected structural details.