The Master's thesis deals with the mechanical design of electric machine rotor. Within the first two chapters of the practical part of the thesis two simplified computational models of the rotor (level 1 models) are compiled. Specifically, the model of flexible rotor mounted on rigid supports and model of rigid rotor mounted on flexible supports. The essence of these computational models lies in solvability using simple equations. Using these models can save time when constructing a pre-design of the rotor geometry. The following chapter is devoted to comparing different approaches to computational modeling of rotor using FEM. A predetermined preliminary design of a high-speed massive rotor is investigated. Computational models of different levels at stress-strain analysis and modal analysis are presented. It also includes a suggestion on how to proceed effectively in a given analysis.

This diploma thesis deals with the design of the linear axis of a heavy machine tool. It describes the basic specifications of these machines, their manufacturers, the parts of which the axis consists and the design itself. The design includes several design variants, calculation of the movement mechanism, drive and linear guide. Follows the selection of the most suitable variant and the drawing documentation of the resulting linear axis.

This diploma thesis deals with the construction proposal of a small multifunctional modeller CNC milling machine that enables milling of aluminium alloys and 3D printing using the FDM method. Based on the research, analyzes and defined entry requirements the construction proposal is created and verified by calculations. The thesis contains a description of all the construction parts including the printhead, the tool tray and the safety cover. The other part of the thesis describes the machine geometry adjustment and specifies the choice of control system. The thesis includes a 3D model and the drawing documentation of selected structural nodes.

The main idea that lead to the development of EC (electronic commutation) motors is to remove from commutation motors, called DC (direct current) motors, the mechanical commutation system i.e. the cylinder brushes and the commutator that limits in most of the applications the longevity of direct current motors. The commutator is the source of electromagnetic interference and it limits the motor speed. At the same time it is required to keep the outstanding features of DC motors, mainly the multiple overload capacity, high starting torque, low time constant and small dimensions. Thesis introduces the problematic of electrically switched machines and their possible construction versions. Based on obtained findings there is performed an analytical calculation of EC-machine with classical stator (made with two grooves on pole and phase) and with segmental stator for given parameters. With the known parameters of the machines from personal design there were created models of both machine types, and the results obtained from the program FEMM were compared to those of analytical calculations.

Táto práca pojednáva o problematike vytvárania a simulácie reluktančnej sieti synchrónneho stroja s V tvarovanými permanentnými magnetmi v programe PSpice. Na začiatku sa oboznámime s konštrukciou a parametrami stroja a potom vyvodíme základné rovnice na výpočet každého prvku siete. Vypočítame každý prvok tohto stroja a potom vytvoríme túto sieť v PSpice. Na začiatku je simulovaná sieť statická a všetky magnetické odpory sú lineárne. Neskôr nahradíme lineárne odpory reprezentujúce plechy nelineárnymi a počítame s precovnou teplotou permanentných magnetov. Potom porovnáme naše výsledky s FEM metódou počítanými hodnotami a vypočítame indukované napätie v jednej cievke stroja. Na záver vypočítame výkonovú a momentovú charakteristiku stroja.

This thesis provides complete design of generator into a spinning bike. The issue of current development is solved and the analytical design of the generator is made. The software Maxwell is being used for the analysis and optimization. On the basis of the obtained results is designed a model and a design drawing of the generator. The end of the thesis deals with the issue of connecting the generator to the mains supply and price calculation of the investment return.

The aim of this diploma thesis is detail description of theory, design process and final realization of single-purpose machine for pressing canister funnels. Theoretical section of this work covers manufacturing standards of the electrical cabinets, options for the single-purpose machine control with focus on the programmable logic controller e.g. PLC, PLC control program concept with definition of the main alarm states and description of two types of electrical cabinet. Practical part contains description of the electrical cabinet, its block diagram, photo documentation of the wiring (chapter 4.), chosen PLC type, its advantages and detail program description using Ladder diagram notation, communication with operator realized with touch LCD panel, programming environment for this LCD panel and program realization process. Finalized machine description and its photo documentation in manufacturing process is covered in the end. This diploma thesis is based and extends previously successfully defended semester project.

This thesis is related to axial flux permanent magnet machines. The first part is describes the basic information about this type of machines. Main part is focused on design of the machine. For the purpose of the preliminary design there is mathematical model of the basic machine. This model is followed by finite elements analysis for the further evaluations and validation of the mathematical design. The last part is evaluating the loses of the machine ant its virtual efficiency.

The theme of my diploma thesis is Building and Technological Project for a residential building in Strážnice. This is a study of the implementation of major technological stages of object SO- 01 residential building, the project concerning the construction site installation, design the mechanical assembly, traffic solutions, technological process earthworks, foundation structures, piles CFA and reinforced concrete ceiling construction. The work includes further object schedule, financial plan, a detailed timetable for construction of residential building, the budget, the inspection and the test plan, safety hazards on a construction site in the implementation of the substructure object and thermal technical assessment of selected structures.

Proposal progressive technology of production shearing tools. Description shearing tools and shear of the process, analysis current technology production shearing tools. Proposition two variant technology production given to dies method conventional and unconventional, elaboration technological progress and programmes on choice NC machinery, their comparison and technical economic evaluation in fine with recommendation for usage practically.