The acoustic environment generated during launch is the most demanding structural load case for large, lightweight satellite reflector antennas. The reflector is exposed to extremely high sound pressure levels originating from the structural excitation of the rocket engines and exterior air flow turbulence. This thesis aims to predict the structural responses in the reflector due to the acoustic pressure load with a model based on Finite Element Modelling (FEM). The FE-model is validated against a previously performed Boundary Element Method (BEM) analysis. An approach called Split Loading together with a combination of BEM and FEM will be utilized to handle the surrounding air mass and the applied sound pressures. The idea of Split Loading is to divide the structure into several patches and apply a unit pressure load to each patch separately. In the last step the unit pressure is scaled and correlated by a power spectral density calculated from the acoustic pressures. Split Loading will be implemented in software packages MSC.NASTRAN/PATRAN. The model developed in this thesis handles both the added mass of the surrounding air and the sound pressure applied to the reflector. The model can qualitatively well reproduce the results of the BEM-analysis and the test data. However, the model tends to overestimate responses at low frequencies and underestimate them at high frequencies. The end results is that the model becomes too conservative at low frequencies to be used without further development.

The presented dissertation thesis deals with a simulation of the human phonation in terms of latest theories. Phonation is considered here as a bi-directional fluid-structure-acoustic interaction, where the interaction between all three physical domains occurs due to the unsteady viscous compressible Navier-Stokes equations. There is a solid knowledge background in the first part of the thesis. It concerns the latest concepts in computational modeling of the human phonation, the most important and recent theories about the human voice production and some key aspects of the human anatomy, physiology and pathology. Also voice assessment is discussed. The second part of the thesis describes an in-depth analysis of a phonation simulation in a planar computational model. The basic concepts proceed from algorithms developed in the Institute of Solid Mechanics, Mechatronics and Biomechanics. Created models are able to reproduce sounds of all Czech vowels and the most common evaluated parameters very close to physiological ranges. The simulated pathology, Reinke's edema, is demonstrated in order to explore its influence on the vowel sound. The third part focuses on modeling of phonation in a spatial computational model. All Czech vowels are simulated also here and compared to the planar model and to actual measurement. The spatial model serves as the starting point to modeling of a longitudinal pretension incorporated in the vocal folds. In the last part of the thesis, a modeling of the phonation with vocal folds pretension is investigated. Although the models are tuned to a rather soft phonation, the results are in agreement with the relevant physiologic phenomena. While the spatial model is highly computationally expensive, a hybrid planar model with pretension is proposed. A special attention is paid to the analysis of self-sustained oscillation of the vocal folds. It is shown, the planar model cannot reproduce such kind of oscillation in the actual version, albeit time of oscillation was considerably extended. On the other hand, oscillation of the spatial vocal folds are stabilized without effects accompanying subduing of oscillation. It can be supposed that the spatial model is able to reproduce self-sustained oscillation as a basic principle present during the human phonation.

This doctoral thesis focuses on computational modelling of human vocal folds and vocal tract functions using finite element method (FEM). Human voice is crucial in human communication. Therefore one of the main targets of current medicine is creation of artificial vocal folds, which would substitute the original vocal folds. The computational modelling can be used to understand principles of voice production, determination of parameters that the artificial vocal folds have to meet and verification of their functionality. First part of this thesis focuses on modelling of human voice creation by whisper. Influence of intraglottal gap on eigenvalues distribution for individual vowels was analysed using FEM vocal tract and trachea model. Further there is presented two-dimensional (2D) finite element model of the flow-induced self-oscillation of the human vocal folds in interaction with acoustic spaces of the vocal tract. The 2D vocal tract model was created on the basis of converting the data from magnetic resonance images (MRI). Explicit coupling scheme with separated solvers for structure and fluid domain was used for modelling of the fluid-structure interaction. Created computational model comprises: large deformations of the vocal folds tissue, contact between vocal folds, fluid-structure interaction, morphing the fluid mesh according to the vocal-fold motion (Arbitrary Lagrangian-Eulerian approach), unsteady viscous compressible or incompressible airflow described by the Navier-Stokes equations and airflow separation during glottis closure. This model is used to analyse the influence of stiffness and damping changes in individual vocal fold tissue layers (in particular in superficial lamina propria). Part of this computational analysis is also comparison of vocal folds behaviour for compressible and incompressible flow model. Videokymograms (VKG) are subsequently created from obtained results of FEM calculations which enable to compare individual variants between themselves and with motion of real human vocal folds. In next part of this thesis is presented three-dimensional (3D) finite element model of the flow-induced self-oscillation of the human vocal folds. This 3D model was created from a previous 2D model by extrude to the third direction. Using this model was again compared influence of compressible and incompressible flow model on vocal folds motion and generated sound by using videokymograms and acoustic spectra. The last part of this thesis focuses on the possibility to replace missing natural source voice in form reed-based element. Behaviour of reed-based element was analysed using computational modelling and using measurements on experimental physical model. The physical model enables changes in setting gap between reed and reed stop and performing acoustical and optical measurements.

Zur Charakterisierung der Mikrostruktur wurde die Geometrie des Verbundes aus REM-Aufnahmen ausgewertet, sowie die Verbundwirkung einzelner Filamente aus Filament-Pull-Out-Versuchen abgeleitet. Die gewonnenen Parameter bilden die Grundlage für die Modellierung von Garnauszugs- und Rissüberbrückungsmodellen. Unabhängig davon wurde ein Filament-Matrix-Verbund-Gesetz simuliert. Die Übereinstimmungen zwischen der Simulation und der experimentellen Untersuchung des Ausziehverhaltens werden in dem Artikel diskutiert. / The microstructure is characterized by analysing the bond geometrically and experimentally. The data to evaluate these two ways are from SEMimages and filament-pull-out-tests. Based on these data yarn-pull-out-models and crack-bridging-models are calculated. In addition a filament-matrix-bond-law is simulated independently. The correlation between the simulation and the experimental analysis of the pull-out behaviour is discussed in this paper.

In this thesis, the in-duct experimental methods for determining aeroacoustic N-ports of in-duct elements are discussed and improved. The scattering matrix determination methods and the related wave decomposition methods are evaluated from measurements in an empty duct carrying a mean flow. The improvements of a new over-determination method for the source part of the N-port is studied using simulations and measurements; in quiescent air as well as measurements of the flow associated noise of a mixer plate, here a triangular plate inserted at an angle in a duct. The new method is shown to improve suppression of random errors while no improvement is achieved for bias errors.   Further, the methods are applied in the study of two different aeroacoustic phenomena; one is the effect on the flow associated noise of the triangular plate achieved by varying the bending stiffness. For the most resilient plate tested, it is observed that when the Strouhal number of the flow noise coalesce with the Helmholtz number of a specific eigen-mode of the plate, the noise is drastically dampened. There is also a weaker broad band effect.   The other phenomena studied is the amplification and attenuation obtained for sound waves propagating in a T-junction of rectangular ducts. It is found that by adding only 10% of inflow in the side branch relative to that in the main branch, the amplification is heavily increased. By adding another 10% the amplification is again similar to that of no side branch flow. Adding further flow lessens the effects still. / QC 20101118 / Experimental characterization of aero-acoustic sources