Digitized by Kansas Correctional Industries

No description available.

The effects of a straw mulch, applied either uniformly or in strips, on the surface energy balance and soil thermal regimes are investigated using a numerical solution to the two-dimensional soil heat transfer equation. The numerical technique used is an extended version of Barakat and Clark's (1966) alternating direction explicit method. The modified technique can solve problems that are periodic in time and/or space, on either rectangular domains or domains with a curvilinear upper boundary, and in which the soil thermal properties may vary with position, time, or temperature. The method also incorporates non-uniform grid spacings to reduce computation time and to increase efficiency. The straw mulch is represented as a single layer of constant shortwave and longwave transmissivities and reflectivities. Vertical transport of heat and water vapour through the mulch is evaluated by bulk transfer equations. Shading of the bare strip and reflection of radiation onto it by the sides of the mulch strip, as well as the reduction of the sky-view factor seen by the bare strip, are included. Solar irradiance, air temperature and water vapour density, wind speed, soil thermal properties and mulch parameters are the required inputs. Evaporation is estimated using a surface resistance model to vapour flow. The model is compared with micrometeorological measurements made in soils covered with barley straw, either uniformly at rates of 2, 10 or 20 t/ha or in 0.30 m wide mulch strips (10 t/ha rate) alternating with 0.10 m wide bare strips, with the strips oriented in north-south, northeast-southwest, or east-west directions. The results show that for the uniformly applied mulch soil temperatures can be adequately predicted but evaporation is underestimated. Both soil temperatures and evaporation are underestimated in the bare strip. The differences are attributed to the penetration of wind eddies into the straw mulch and the microscale advection from the warm straw strips onto the relatively cold bare strips. / Land and Food Systems, Faculty of / Graduate

Thesis (MEng (MechEng))--University of South Australia, 1999

Digitized by Kansas Correctional Industries

The Stubble-stubbloid locus encodes a transmembrane serine protease (Stubble) necessary for the proper formation of sensory bristles, and the morphogenesis of leg and wing epithelia. Genetic and cell biological analysis indicate a role for Stubble in actin cytoskeletal dynamics and cell shape changes in developing epithelia and bristles. Previously reported genetic interactions between Stubble and the Rho1 signaling pathway suggest Stubble influences actin cytoskeleton dynamics in developing imaginal discs through interactions with the Rho1 pathway. This work will discuss a genetic screen conducted to further investigate the role of Stubble in bristle and imaginal disc morphogenesis. From 50,000 EMS-mutagenized chromosomes 12 enhancers of the recessive sbd201 allele were identified, including 6 new sbd alleles. Consistent with the current understanding of genetic interactions regulating imaginal disc morphogenesis, mutations in two Rho1 pathway genes, zipper (2 alleles) and Rho1, were isolated. Additionally, three new mutant enhancers of sbd201 were isolated, one of which has been identified as an allele of the cadherin gene Dacshous, another as an allele of the muscle myosin heavy chain gene, and the last as an allele of Notopleural (Np). Dominant and recessive mutations in the Stubble locus interact with the Np allele identified in this screen, in regards to both limb and bristle development, respectively. Mutations in the Np locus were first identified in 1936, but this locus remains poorly characterized and has never been cloned The genetic and phenotypic characterization of Np will be discussed along with experiments that have mapped the position of the Np locus to a 50kb region at the border of the 44F12, 45A1 cytological regions.

Systemic steroid hormone and intracellular signaling pathways are known to act cooperatively during the development of vertebrate and invertebrate epithelia. However, the mechanism of this interaction is poorly understood. Morphogenesis of Drosophila leg imaginal disc epithelia is regulated both by the steroid hormone 20-hydroxyecdysone (ecdysone) and the RhoA GTPase signaling pathway. Recent evidence suggests that these pathways act cooperatively to control imaginal disc morphogenesis. Thus, leg imaginal disc morphogenesis is an excellent system in which to study the interaction of steroid hormone and intracellular signaling pathways. We have identified mutations in three genes, 12-5, 18-5, and 31-6, with roles in the morphogenesis of leg epithelia. Of particular interest, these mutations interact genetically with each other, mutations in the RhoA signaling pathway, and the ecdysone regulated Sb-sbd (Stubble) transmembrane serine protease. This suggests that the 12-5, 18-5, and 31-6 gene products may link hormone and RhoA signaling responses. The goal of this research was to identify and characterize the 18-5 and 12-5 genes in order to discern the mechanistic relationship between the RhoA pathway and ecdysone hierarchy.18-5 and 12-5 were precisely mapped to molecular locations within the Drosophila genome utilizing a P-element recombination mapping technique. This work narrowed the location of the 18-5 locus to within an interval of 112 kb within the Drosophila genome sequence. This interval contains 17 known and predicted genes. I also mapped the location of the 12-5 locus to a 2.6 Mb interval of the 2nd chromosome. Based on phenotypic analyses and the site of the molecularly mapped interval, a candidate gene for the 18-5 mutation was identified. Sequence analysis of the candidate gene was inconclusive and requires further analysis. Genetic interaction assays indicate that the 18-5 gene product acts upstream or at the level of Rho kinase in the RhoA signaling pathway.

Master of Science / Department of Agronomy / Scott A. Staggenborg / Spatial variability in plant available water can be caused by uncontrollable factors such as topography and soil texture as well as controllable factors such as residue management. Research located on the High Plains evaluated the impact of wheat (Triticum aestivum L.) stubble height on snow catch, plant available water at seeding, and optimal corn seeding rates. Treatments consisted of stripper harvest height of 71 cm (28 in.), cut heights of 25 cm (10 in.), and 10 cm (4 in.) Measured snow depths were significantly different among treatments (p<0.0001) with equivalent precipitation of 5.77 (2.27), 3.25 (1.28), and 1.73 cm (0.68 in.) for the stripped, 25 cm, and 10 cm heights respectively. Available soil water at planting increased 24% as stubble height increased from 10 to 71 cm (4 to 28 in) in one year of the study. Two corn hybrids of varying maturity (97 and 108 days) were planted into the stubble treatments at seeding rates ranging from 2.47 to 5.43 plants m[superscript]-2 (10 to 22 000 plants ac[superscript]-1). In the dry year, the long season hybrid responded positively to increasing population in tall stubble and negatively in short stubble. Yield of the short season hybrid increased with increasing stubble height and was mostly unresponsive to population. Grain yields of both hybrids responded positively to increasing plant population in a wet year. Treatments also affected the yield components of yield plant[superscript]-1, kernel weight, and kernels plant[superscript]-1. Managing seeding rates for uncontrollable factors was attempted with small-plot and field scale research across 3 fields in northeast Kansas. A relationship between soil electro-conductivity (EC) and measured water holding capacity values was developed for one study field. This quadratic relationship was significant (p<0.0001) and explained variability in water holding capacity with respect to EC quite well (R[superscript]2=0.6239). Responses from small plots showed that sites differing in population response characteristics could be identified. Field scale data was used to derive a function describing optimal seeding rate with respect to soil EC. In the field under study, optimal seeding rates varied from 3.08 to 8.74 plants m[superscript]-2 (12 500 to 35 375 plants ac-1).

Typescript. / Thesis (Ph. D.)--University of Hawaii at Manoa, 1977. / Bibliography: leaves 254-273. / Microfiche. / xiv, 273 leaves ill

The aim of this thesis is to extend the knowledge about the use of modern machinery cultivator with minimum tillage and conventional tillage in agriculture. For this purpose you can use a wide range of agricultural machines from various manufacturers such as the Horsch, Lemken, Vaderstad and more. In this work evaluates the stubble Horsch Terrano 6FG and Vaderstad Carrier 820 with a focus on lumps size, incorporation of crop residues and maintain the set depth.