With the development of fuel cell based power systems, the need for more advanced DC-DC power converters has become apparent. In such applications DC-DC converters provide an important link between low voltage fuel cell sources and inverter buses operating at significantly higher voltages. Advancements in converter efficiency, cost reduction, and size reduction are the most necessary. These challenges are formidable, even when considering the improvements made to conventional DC-DC topologies. However, it can be possible to achieve these criteria through the implementation of more advanced topologies. A recently developed efficient three-phase DC-DC topology offers benefits over standard designs. Passive component sizes and output ripple voltage were reduced as a result of an effective boost in switching frequency. Converter output voltage was reached more easily due to an increased transformer voltage boost ratio in addition to the turns ratio. For cost reduction, the converter was designed and built with discrete components instead of more expensive integrated modules. This thesis presents an overview of the three-phase converter, with a detailed focus on the design, implementation, and performance of the switching stage. The functionality of the three-phase topology is covered along with the selection of converter components. Simulation results are shown for both ideal and real converter models. Considerations for the switching device package with respect to circuit board and heat sinking configurations are discussed in support of the selection of an insulated metal substrate (IMS) circuit board. An effective circuit layout designed to minimize parasitic trace inductances as well as provide favorable component positioning is presented. Experimental converter test results are shown and the causes of undesired effects are identified. Switching stage modifications and their results are discussed along with the benefits of proposed future design enhancements. / Master of Science