The main goal of this thesis is focused on comparing the selected properties of mineral and synthetic oils. For this was used operating monitoring and laboratory experiment and with them was compared properties. At operation was observed oxidation, sulfation, nitration, TAN, TBN and the content of metal elements in the oil. In Laboratory was experimental investigated the effect of increased temperature and change of color , viscosity and lubricity. The theoretical part of the thesis describes the basic of tribology and lubrication engineering, types of lubricants and oil properties and their production and distribution.

The primary goal of my thesis is an analysis of czech accounting regulations in the area of evaluation, accounting and reporting of an animals that is followed by survey of solutions used in particular zoological gardens of the Czech Republic. My thesis also contains basic informations of history, legislation and funding of zoological gardens in the Czech Republic.

The master thesis focuses on design of fully-differential frequency filters with modern active components in current mode. First part informs about problems concerning analogue frequency filters and creating differential structures. Second part deals with methods of create filters and used active components - DACA (Digital Adjustable Current Amplifier) and MO-CF (Multiple Output Current Follower). Own design of differential filters is divided on two parts. In the first part of design results there are filters created with synthetic higher-order elements. There are presented circuit structures implementing the third order low pass filter and high pass filter. In the second part are designed filters with signal flow graphs. The first circuit implementing low pass, high pass, band pass, band rejection and all-pass filter. The second circuit is with help of the same set of current amplification by DACA components tuning of the natural frequency. For this circuit was make sensitivity analysis. In the final part is practical implementation of the differential frequency filter for tuning of the natural frequency and summarises the thesis.

The goal of this master thesis is to design and implement an approach for synthetic fingerprint generation from a biometric template. The thesis bases the solution on an existing fingerprint generator called SyFDaS developed at the Brno University of Technology, Faculty of Information Technology. Individual components of the generator had to be modified and automized to suit better the task of generating from a template. The end product enables the user to create a fingerprint without any intervention just by importing a template. The evaluation in this thesis presents results obtained by comparing the synthetic and original fingerprints using the VeriFinger algorithm. Entirely automatically created fingerprints achieved mixed results; however, manual adjustments of the parameters brought substantial improvements. Up to 72% of synthetic fingerprints reached the match by the VeriFinger. The results of the evaluation helped to identify weak points of the current solution. Based on these, the thesis proposes further steps to improve the success rate of automatic generation and the quality of other components.

This master thesis discusses the design of Synthetic immittance dipoles using active current elements. The introduction presents aktive current elemetns MO-CF and DACA as buildings blocks for analog filters that are able to process signals with frequencies up to ten megahertz. Methods of synthetic elements using active current elements design is described in this thesis.Is resulted from full addmitances net which contains one active current element Subsequently there are designed various types of frequency filters working in current mode. The functionality of designed filters was verified by computer simulation. Selected designed filter were practically verified with commercially available elelments and active element MO-CF. Measurements in the frequency domain were carried on. On all of types of filters are made sensitivity analysis.

This thesis deals with design and use synthetic circuit elements with higher-order immittance with controlled current sources to implement the frequency filters. Controlled current sources which are derived from the voltage variations are presented. They are current follower, current invertor and current operational amplifier. Low-pass and high-pass filter which are used synthetic elements are simulated on computer. The influence of real properities of active elements and passive elements tolerances on filter functionality is investigated. Selected circuit of frequency filter is realized and measured the frequency characteristic.

The work deals with design of transformation cells suitable for realization of higher orders frequency filters with possibility of cutoff frequency control. At first, there is a common description of frequency filters and active elements like current and voltage conveyors. Furthermore assumptions of cutoff frequency control are defined which result in a convenient characteristical equation. Phylosophy of synthetic elements DP , EP , DS , ES including a possibility of change of cutoff frequency is next in line. By exploitation of synthetic elements theory new circuit’s schemes of transformation cells are searched. The work continues with the choice of appropriate transformation cells for resulting circuit’s solutions of frequency filters with possibility of cutoff frequency control by using transfer coefficients of active elements or with help of passive elements. The work concludes with verification of its proper function based on a simulation executed in OrCAD and with practical implementation of choosen circuit’s solution.

The aim of this dissertation is to get to know metodology and construction of suitable electrical insertion in measurement of energy consumed by discharge. These findings will serve to scale dependings of output to frequence for surface and voluminous dielektric barrier discharge in synthetic dry air and determination of effect of humidity in air on electric characteristics of discharge.

Cílem této práce je vyvinout metody simulací poškozování otisků prstů. V první části je kladen důraz na shrnutí stávajících znalostí v oblasti generování syntetických otisků prstů a jejich poškozování. Dále jsou uvedeny informace o otiscích prstů obecně, jejich rozpoznávání a vlivy, které otisky poškozují, včetně onemocnění kůže. Práce obsahuje návrh a implementaci aplikace SyFDaS pro generování a modulární poškozování otisků prstů. Další částí je popis metod pro poškozování vlivem průtahového režimu, zúženého snímače, poškozeného snímače, přítlaku a vlhkosti, zkreslení pokožky, bradavic, atopického ekzému a lupénky. Dále je analyzováno několik dalších typů poškození včetně falzifikátů otisků prstů. Celkově je uvedeno 43 základních poškození, která jsou vizuálně verifikována. Díky kombinování poškození je využito 1 171 typů poškození a vygenerováno 348 300 obrázků otisků prstů, které jsou vyhodnoceny čtyřmi různými metodami posuzování kvality.

This master’s thesis is bent on comparison of four newest method of analog frequency filter design. After the introductory part, a description of properties and internal structure of active elements (Second-Generation Current Conveyor), VG-CCII (Variable Gain Current Conveyor), VCG-CCII (Voltage and current gained second generation current conveyor) a CFTA (Current Follower Transconductance Amplifier) is mentioned. This active elements are used in subsequent design. At the next part, process of frequency filters design by generalized method of filter design flowing from the full admittance network, by extending autonomous circuits, design using the signal flow graphs theory and design with synthetic high-order elements are presented. Thirty nine autonomous circuits are derived from full admittance networks with one and two active elements CFTA. Selected autonomous circuits are used for direct design of frequency filter and for filter design by extending autonomous circuits. Produced structures guarantee the possibility of controlling the quality factor Q0 independently of the characteristic frequency f0. Three frequency filters are designed by method using the signal flow graph theory. Active elements CFTA, VG-CCI and VCG-CCII are used. Full multifunctional frequency filter with conveyors VG-CCII and VCG-CCII guarantee the possibility of controlling the quality factor Q0 and the characteristic frequency f0 independently of the each other. In last part, from 2nd to 5th order low-pass filters by the method using synthetic high-order elements are designed. The behaviour of the selected filters has been verified by simulations in the PSpice program for all of the mentioned methods separately.