<p>The purpose with this masters thesis was to model the scanner in a system for laser bathymetry. The model was then used to develop a controller for the scanner so a good search pattern was achieved. </p><p>Two different types of models have been tested, a physical model and a Black Box model of Box Jenkins type. The physical model has been derived from Lagranges equations. Identification experiments have been used to compute the Black Box model and to find the unknown parameters in the physical model. </p><p>Three different controllers have been tested, a PID controller, a model predictive controller and a controller with feedforward. The controller with feedforward gave the best result. By softening the reference signal and using feedforward a good search pattern was achieved.</p>

<p>Linear time-invariant approximations of nonlinear systems are used in many applications and can be obtained in several ways. For example, using system identification and the prediction-error method, it is always possible to estimate a linear model without considering the fact that the input and output measurements in many cases come from a nonlinear system. One of the main objectives of this thesis is to explain some properties of such approximate models.</p><p>More specifically, linear time-invariant models that are optimal approximations in the sense that they minimize a mean-square error criterion are considered. Linear models, both with and without a noise description, are studied. Some interesting, but in applications usually undesirable, properties of such optimal models are pointed out. It is shown that the optimal linear model can be very sensitive to small nonlinearities. Hence, the linear approximation of an almost linear system can be useless for some applications, such as robust control design. Furthermore, it is shown that standard validation methods, designed for identification of linear systems, cannot always be used to validate an optimal linear approximation of a nonlinear system.</p><p>In order to improve the models, conditions on the input signal that imply various useful properties of the linear approximations are given. It is shown, for instance, that minimum phase filtered white noise in many senses is a good choice of input signal. Furthermore, the class of separable signals is studied in detail. This class contains Gaussian signals and it turns out that these signals are especially useful for obtaining approximations of generalized Wiener-Hammerstein systems. It is also shown that some random multisine signals are separable. In addition, some theoretical results about almost linear systems are presented.</p><p>In standard methods for robust control design, the size of the model error is assumed to be known for all input signals. However, in many situations, this is not a realistic assumption when a nonlinear system is approximated with a linear model. In this thesis, it is described how robust control design of some nonlinear systems can be performed based on a discrete-time linear model and a model error model valid only for bounded inputs.</p><p>It is sometimes undesirable that small nonlinearities in a system influence the linear approximation of it. In some cases, this influence can be reduced if a small nonlinearity is included in the model. In this thesis, an identification method with this option is presented for nonlinear autoregressive systems with external inputs. Using this method, models with a parametric linear part and a nonparametric Lipschitz continuous nonlinear part can be estimated by solving a convex optimization problem.</p> / <p>Linjära tidsinvarianta approximationer av olinjära system har många användningsområden och kan tas fram på flera sätt. Om man har mätningar av in- och utsignalerna från ett olinjärt system kan man till exempel använda systemidentifiering och prediktionsfelsmetoden för att skatta en linjär modell utan att ta hänsyn till att systemet egentligen är olinjärt. Ett av huvudmålen med den här avhandlingen är att beskriva egenskaper för sådana approximativa modeller.</p><p>Framförallt studeras linjära tidsinvarianta modeller som är optimala approximationer i meningen att de minimerar ett kriterium baserat på medelkvadratfelet. Brusmodeller kan inkluderas i dessa modelltyper och både fallet med och utan brusmodell studeras här. Modeller som är optimala i medelkvadratfelsmening visar sig kunna uppvisa ett antal intressanta, men ibland oönskade, egenskaper. Bland annat visas det att en optimal linjär modell kan vara mycket känslig för små olinjäriteter. Denna känslighet är inte önskvärd i de flesta tillämpningar och innebär att en linjär approximation av ett nästan linjärt system kan vara oanvändbar för till exempel robust reglerdesign. Vidare visas det att en del valideringsmetoder som är framtagna för linjära system inte alltid kan användas för validering av linjära approximationer av olinjära system.</p><p>Man kan dock göra de optimala linjära modellerna mer användbara genom att välja lämpliga insignaler. Bland annat visas det att minfasfiltrerat vitt brus i många avseenden är ett bra val av insignal. Klassen av separabla signaler detaljstuderas också. Denna klass innehåller till exempel alla gaussiska signaler och just dessa signaler visar sig vara speciellt användbara för att ta fram approximationer av generaliserade wiener-hammerstein-system. Dessutom visas det att en viss typ av slumpmässiga multisinussignaler är separabel. Några teoretiska resultat om nästan linjära system presenteras också.</p><p>De flesta metoder för robust reglerdesign kan bara användas om storleken på modellfelet är känd för alla tänkbara insignaler. Detta är emellertid ofta inte realistiskt när ett olinjärt system approximeras med en linjär modell. I denna avhandling beskrivs därför ett alternativt sätt att göra en robust reglerdesign baserat på en tidsdiskret modell och en modellfelsmodell som bara är giltig för begränsade insignaler.</p><p>Ibland skulle det vara önskvärt om en linjär modell av ett system inte påverkades av förekomsten av små olinjäriteter i systemet. Denna oönskade påverkan kan i vissa fall reduceras om en liten olinjär term tas med i modellen. En identifieringsmetod för olinjära autoregressiva system med externa insignaler där denna möjlighet finns beskrivs här. Med hjälp av denna metod kan modeller som består av en parametrisk linjär del och en ickeparametrisk lipschitzkontinuerlig olinjär del skattas genom att man löser ett konvext optimeringsproblem.</p>

<p>Information about dynamic tire properties has always been important for drivers of wheel driven vehicles. With the increasing amount of systems in modern vehicles designed to measure and control the behavior of the vehicle information regarding dynamic tire properties has grown even more important.</p><p>In this thesis a number of methods for modeling and estimating dynamic tire properties have been implemented and evaluated. The more general issue of estimating model parameters in linear and non-linear vehicle models is also addressed.</p><p>We conclude that the slope of the tire slip curve seems to dependent on the stiffness of the road surface and introduce the term combined stiffness. We also show that it is possible to estimate both longitudinal and lateral combined stiffness using only standard vehicle sensors.</p>

<p>In system identification, different methods are often classified as parametric or non-parametric methods. For parametric methods, a parametric model of a system is considered and the model parameters are estimated. For non-parametric methods, no parametric model is used and the result of the identification is given as a curve or a function.</p><p>One of the non-parametric methods is the impulse response analysis. This approach is dynamic simulation. This thesis introduces a new paradigm for dynamic simulation, called impulse-based simulation. This approach is based on choosing a Dirac function as input, and as a result, the output will be equal to the impulse response. However, a Dirac function cannot be realized in practice, and an approximation has to be used. As a consequence, the output will deviate from the impulse response. Once the impulse response is estimated, a parametric model can be fitted to the estimation.</p><p>This thesis aims to determine the parameters in a parametric model from an estimated impulse response. The process of investigating the models is a critical aspect of the project. Correlation analysis is used to obtain the weighting function from the estimates of covariance functions.</p><p>Later, a relation formed between the parameters and the estimates (obtained by correlation analysis) in the form of a linear system of equations. Furthermore, simulations are carried out using Monte Carlo for investigating the properties of the two step approach, which involves in correlation analysis to find h-parameters and least squares and total least squares methods to solve for the parameters of the model. In order to evaluate the complete capability of the approach to the noise variation a study of signal to noise ratio and mean, mean square error and variances of the estimated parameters is carried out.</p><p>The results of the Monte Carlo study indicate that two-step approach can give rather accurate parameter estimates. In addition, the least squares and total least squares methods give similar results.</p>

<p>The growing energy demand has caused the interconnected power systems to operate close to their stability limit. As a consequence, poorly damped low-frequency oscillations are becoming a common phenomenon. Such oscillations weaken the system security and if not effectively damped can lead to widespread blackouts. A contemporary solution is the addition of Power System Stabilizers (PSSs) to generators. A relatively recent solution based on the advancements in high-power semiconductors is the Flexible AC Transmission System (FACTS) technology meant for transmission locations. FACTS technology comprises of a multitude of FACTS devices among which the <i>Unified Power Flow Controller (UPFC)</i> possesses a unique capability of providing both power flow and voltage control. Particularly, with a suitable transient control system the UPFC can satisfactorily mitigate power system oscillations.</p> <p>This thesis proposes an adaptive control scheme that supplements an existing Proportional-Integral (PI) UPFC control system in damping power system oscillations. PI control is a well-established theory and a commonly used industrial controller. However, its application in a power system that experiences continuously changing system conditions demands its frequent re-tuning. On the other hand, the proposed scheme is a Self Tuning (ST) controller that automatically adapts to the system changes and thereby provides an optimal control for a wide range of operating scenarios. The proposition of assisting the primary PI control action is unique in its approach since it retains the functionality of the existing PI controllers and also enhances the overall damping performance through an add-on ST control loop.</p> <p>The proposed novel ST scheme consists of a Constrained Recursive Least Squares (CRLS) identifier that tracks system parameters recursively and a self-tuning Pole Shift (PS) controller that works on the identified system model to generate a robust control output. Also, to effectively smoothen out the rapid variations of identified system parameters and consequent ringing of control output during large disturbances, the thesis specifies the replacement of the standard-RLS identifier with a "constrained" RLS (CRLS) identifier. The damping enhancement achieved by the proposed controller has been verified through time-domain simulations. The test results clearly depict that the proposed add-on scheme not only enhances the overall damping but is also robust with respect to power flow level, fault type and location. Its inherent flexibility and the positive test results suggest that with little modification, it can be easily applied to other FACTS devices currently incorporated in transmission networks.</p>

While the characteristic dimensions of electronic systems scale down to micro- or nano-world, their performance is greatly influenced. Micro-fabrication process or variations of the operating situation such as temperature, humidity or pressure are usual cause of dispersion. Therefore, it seems essential to co-integrate self-testing or self-adjustment routines for these microdevices. For this feature, most existing system parameter estimation methods are based on the implementation of high-resolution digital measurements of the system's output. Thus, long design time and large silicon areas are needed, which increases the cost of the micro-fabricated devices. The parameter estimation problems based on binary outputs can be introduced as alternative self-test identification methods, requiring only a 1-bit Analog-to-Digital Converter (ADC) and a 1-bit Digital-to-Analog Converter (DAC).In this thesis, we propose a novel recursive identification method to the problem of system parameter estimation from binary observations. An online identification algorithm with low-storage requirements and small computational complexity is derived. We prove the asymptotic convergence of this method under some assumptions. We show by Monte Carlo simulations that these assumptions do not necessarily have to be met in practice in order to obtain an appropriate performance of the method. Furthermore, we present the first experimental application of this method dedicated to the self-test of integrated micro-electro-mechanical systems (MEMS). The proposed online Built-In Self-Test method is very amenable to integration for the self-testing of systems relying on resistive sensors and actuators, because it requires low memory storage, only a 1-bit ADC and a 1-bit DAC which can be easily implemented in a small silicon area with minimal energy consumption.

Linear time-invariant approximations of nonlinear systems are used in many applications and can be obtained in several ways. For example, using system identification and the prediction-error method, it is always possible to estimate a linear model without considering the fact that the input and output measurements in many cases come from a nonlinear system. One of the main objectives of this thesis is to explain some properties of such approximate models. More specifically, linear time-invariant models that are optimal approximations in the sense that they minimize a mean-square error criterion are considered. Linear models, both with and without a noise description, are studied. Some interesting, but in applications usually undesirable, properties of such optimal models are pointed out. It is shown that the optimal linear model can be very sensitive to small nonlinearities. Hence, the linear approximation of an almost linear system can be useless for some applications, such as robust control design. Furthermore, it is shown that standard validation methods, designed for identification of linear systems, cannot always be used to validate an optimal linear approximation of a nonlinear system. In order to improve the models, conditions on the input signal that imply various useful properties of the linear approximations are given. It is shown, for instance, that minimum phase filtered white noise in many senses is a good choice of input signal. Furthermore, the class of separable signals is studied in detail. This class contains Gaussian signals and it turns out that these signals are especially useful for obtaining approximations of generalized Wiener-Hammerstein systems. It is also shown that some random multisine signals are separable. In addition, some theoretical results about almost linear systems are presented. In standard methods for robust control design, the size of the model error is assumed to be known for all input signals. However, in many situations, this is not a realistic assumption when a nonlinear system is approximated with a linear model. In this thesis, it is described how robust control design of some nonlinear systems can be performed based on a discrete-time linear model and a model error model valid only for bounded inputs. It is sometimes undesirable that small nonlinearities in a system influence the linear approximation of it. In some cases, this influence can be reduced if a small nonlinearity is included in the model. In this thesis, an identification method with this option is presented for nonlinear autoregressive systems with external inputs. Using this method, models with a parametric linear part and a nonparametric Lipschitz continuous nonlinear part can be estimated by solving a convex optimization problem. / Linjära tidsinvarianta approximationer av olinjära system har många användningsområden och kan tas fram på flera sätt. Om man har mätningar av in- och utsignalerna från ett olinjärt system kan man till exempel använda systemidentifiering och prediktionsfelsmetoden för att skatta en linjär modell utan att ta hänsyn till att systemet egentligen är olinjärt. Ett av huvudmålen med den här avhandlingen är att beskriva egenskaper för sådana approximativa modeller. Framförallt studeras linjära tidsinvarianta modeller som är optimala approximationer i meningen att de minimerar ett kriterium baserat på medelkvadratfelet. Brusmodeller kan inkluderas i dessa modelltyper och både fallet med och utan brusmodell studeras här. Modeller som är optimala i medelkvadratfelsmening visar sig kunna uppvisa ett antal intressanta, men ibland oönskade, egenskaper. Bland annat visas det att en optimal linjär modell kan vara mycket känslig för små olinjäriteter. Denna känslighet är inte önskvärd i de flesta tillämpningar och innebär att en linjär approximation av ett nästan linjärt system kan vara oanvändbar för till exempel robust reglerdesign. Vidare visas det att en del valideringsmetoder som är framtagna för linjära system inte alltid kan användas för validering av linjära approximationer av olinjära system. Man kan dock göra de optimala linjära modellerna mer användbara genom att välja lämpliga insignaler. Bland annat visas det att minfasfiltrerat vitt brus i många avseenden är ett bra val av insignal. Klassen av separabla signaler detaljstuderas också. Denna klass innehåller till exempel alla gaussiska signaler och just dessa signaler visar sig vara speciellt användbara för att ta fram approximationer av generaliserade wiener-hammerstein-system. Dessutom visas det att en viss typ av slumpmässiga multisinussignaler är separabel. Några teoretiska resultat om nästan linjära system presenteras också. De flesta metoder för robust reglerdesign kan bara användas om storleken på modellfelet är känd för alla tänkbara insignaler. Detta är emellertid ofta inte realistiskt när ett olinjärt system approximeras med en linjär modell. I denna avhandling beskrivs därför ett alternativt sätt att göra en robust reglerdesign baserat på en tidsdiskret modell och en modellfelsmodell som bara är giltig för begränsade insignaler. Ibland skulle det vara önskvärt om en linjär modell av ett system inte påverkades av förekomsten av små olinjäriteter i systemet. Denna oönskade påverkan kan i vissa fall reduceras om en liten olinjär term tas med i modellen. En identifieringsmetod för olinjära autoregressiva system med externa insignaler där denna möjlighet finns beskrivs här. Med hjälp av denna metod kan modeller som består av en parametrisk linjär del och en ickeparametrisk lipschitzkontinuerlig olinjär del skattas genom att man löser ett konvext optimeringsproblem.

Identification of nonlinear dynamical models of a black box nature involves both structure decisions (i.e., which regressors to use and the selection of a regressor function), and the estimation of the parameters involved. The typical approach in system identification is often a mix of all these steps, which for example means that the selection of regressors is based on the fits that is achieved for different choices. Alternatively one could then interpret the regressor selection as based on hypothesis tests (F-tests) at a certain confidence level that depends on the data. It would in many cases be desirable to decide which regressors to use, independently of the other steps. A survey of regressor selection methods used for linear regression and nonlinear identification problems is given. In this thesis we investigate what the well known method of analysis of variance (ANOVA) can offer for this problem. System identification applications violate many of the ideal conditions for which ANOVA was designed and we study how the method performs under such non-ideal conditions. It turns out that ANOVA gives better and more homogeneous results compared to several other regressor selection methods. Some practical aspects are discussed, especially how to categorise the data set for the use of ANOVA, and whether to balance the data set used for structure identification or not. An ANOVA-based method, Test of Interactions using Layout for Intermixed ANOVA (TILIA), for regressor selection in typical system identification problems with many candidate regressors is developed and tested with good performance on a variety of simulated and measured data sets. Typical system identification applications of ANOVA, such as guiding the choice of linear terms in the regression vector and the choice of regime variables in local linear models, are investigated. It is also shown that the ANOVA problem can be recast as an optimisation problem. Two modified, convex versions of the ANOVA optimisation problem are then proposed, and it turns out that they are closely related to the nn-garrote and wavelet shrinkage methods, respectively. In the case of balanced data, it is also shown that the methods have a nice orthogonality property in the sense that different groups of parameters can be computed independently.

The contents of this thesis can be divided into two main parts. The first one is the development of an identification methodology for the modelling of complex industrial processes. The second one is the application of this methodology to the curl and twist problem. The main purpose behind the proposed methodology is to provide a schematic planning, together with some suggested tools, when confronted with the challenge of building a complex model of an industrial process. Particular attention has been placed to outlier detection and data analysis when building a model from old, or historical, process data. Another aspect carefully handled in the proposed methodology is the identifiability analysis. In fact, it is rather common in process modelling that the model structure turns out to be weakly identifiable. Consequently, the problem of variable selection is treated at length in this thesis, and a new algorithm for variable selection based on regularization has been proposed and compared with some of the classical methods, yielding promising results. The second part of the thesis is about the development of a curl predictor. Curl is the tendency of paper of assuming a curved shape and is observed mainly during humidity changes. Curl in paper and in paperboard is a long-standing problem because it may seriously affect the processing of the paper. Unfortunately, curl cannot be measured online, but only in the laboratory after that an entire tambour has been produced. The main goal of this project is then to develop a model for curl and twist, and eventually to implement it as an on-line predictor to be used by the operators and process engineers as a tool for decision/control. The approach we used to tackle this problem is based on grey-box modelling. The reasons for such an approach is that the physical process is very complex and nonlinear. The influence of some inputs is not entirely understood, and besides it depends on a number of unknown parameters and unmodelled/unmesurable disturbances. Simulations on real data show a good agreement with the measurement, particularly for MD and CD curl, and hence we believe that the model has an usable accuracy for being implemented as an on-line predictor. / QC 20100928

This paper proposes a general convex framework for the identification of switched linear systems. The proposed framework uses over-parameterization to avoid solving the otherwise combinatorially forbidding identification problem, and takes the form of a least-squares problem with a sum-of-norms regularization, a generalization of the ℓ1-regularization. The regularization constant regulates the complexity and is used to trade off the fit and the number of submodels. / <p>Funding Agencies|Swedish foundation for strategic research in the center MOVIII||Swedish Research Council in the Linnaeus center CADICS||European Research Council|267381|Sweden-America Foundation||Swedish Science Foundation||</p>