When working under water at great depths, or in tough environments, remotely controlled underwater vehicles, so called ROV:s, are a good tool too use. With the help of these robots it is possible to work for longer periods of time and at larger depths then with ordinary divers. Ocean Robotics is a company from Linköping, Sweden, that has over 40 years of experience with ROV:s. They produce several different models for different kind of jobs. The purpose of this project was to develop a concept of a device that keeps the tension constant on the tether that connects the ROV with the operator. The tension needs to be constant when the tether is being rolled in on and out from the winch. The work was executed on behalf of Ocean Robotics and a prerequisite was that it should be possible to integrate the device with the winch system they have today. The work have followed Ulrich and Eppingers method for product development and together with requirements from the contractor several concepts was generated. The concepts were validated in a decision matrix and the concepts with the highest score was modeled in the CAD-program CREO Parametrics. The concepts got further developed and was compared against each other once again. Which generated the final concept. Furthermore a couple of friction tests were executed to find appropriate materials for the construction. The final concept will be mounted on the winch and connected to Ocean Robotics self reversing screw. To measure the tension on the tether a load cell is used and the tether is fed by a rubberized wheel that is driven by an electric motor. To adjust the force around the tether a trapezoidal thread is driven by another electric motor, which adjust the pinch wheels height. The tether goes as a tangent between the two wheels that has a profile that insures that the force goes around the tether.