In this thesis electromagnetic wave propagation is investigated in an indoor environment. The indoor environment is a furnished office building with corridors, corners and rooms. Particularly, there is an atrium through the building in the center. For the study there were measurements available from real building in the 2.1 GHz frequency band. One objective is to design a propagation model that should be simple but reflect the trend of the propagation measurements. Furthermore, a system performance evaluation is carried out based on the implemented model. The proposed 3D model is a combination of the Free Space Path Loss model, the Keenan-Motley model and the recursive diffraction model. The channel predictions from the 2D Keenan-Motley algorithm are quite different from the measurements. Therefore, the 3D Keenan-Motley algorithm is designed to depict the atrium effect and speed up the simulation at the same time. Besides a buttery radiation diagram is created to mimic Kathrein 80010709 antenna installed in the building. Finally, a diffracted path is added to improve the received signal strength for the users around the atrium areas. With all the above procedures, the final results from the model are in good quantitative agreement with the measurement data. With the implemented propagation model, a further analysis of the system performance on the Distributed Antenna System (DAS) is performed. A comparison for the system capacity between the closed building and the atrium building is conducted, showing that the former one benefits more when the number of the cells increases. The reason is the atrium cells suffer severe interference from neighbor cells during high traffic demand scenarios. Then some further cell configurations show that the number of the cells, the geometry performance and the balance of the user fraction should be considered to improve the system capacity.