No description available.

<p>The optical efficiency of a commercially available sputter deposited spectrally selective solar absorber was improved. The main purposes were to decrease the thermal emittance, increase the solar absorbtance of the absorber and to protect the substrate from degradation due to environmental influence. The adhesion properties between the corrosion-protecting barrier and the substrate were also studied. This project was focused on process improvements that are realistic to implement in industrial production.</p><p>The thermal emittance of the absorber was decreased from 0.12 to 0.06 by changing the material of the corrosion-protecting layer from nickel-chromium to copper-nickel. Copper-nickel was less sensitive to variations in the sputter parameters than nickel-chromium. A novel method that could simplify the search for alternative corrosion resistant materials with a low thermal emittance has been purposed. Since resistivity data usually exist or can easily be measured and infrared measurements require more sophisticated measurements, the Hagen-Rubens relation was investigated for copper-nickel and nickel-chromium alloys. The dc-resistivity was found to be related to the infrared emittance or the integrated thermal emittance for alloys in their solid soluble fcc phase.</p><p>The solar absorbtance was increased when a graded index absorbing coating was tailored for a crossover of the reflectance from low to high reflectance at about 2.5 µm. The solar absorber graded index coating was optimized for nickel metal content in nickel oxide and a solar absorptance of 0.89-0.91 was achieved. The solar absorptance was further increased to 0.97 when an antireflection coating was added on top of the absorbing layer.</p><p>Finally, extrapolation algorithms were developed to assure correct determination of the thermal emittance for coatings on glass since modern spectrometers that do not cover the complete wavelength interval required to calculate the thermal emittance of surfaces at room temperatures accurately. The error arising from the extrapolation algorithms were smaller than the noise from the optical measurements. Similar strategies can be used for other surfaces.</p>

The optical efficiency of a commercially available sputter deposited spectrally selective solar absorber was improved. The main purposes were to decrease the thermal emittance, increase the solar absorbtance of the absorber and to protect the substrate from degradation due to environmental influence. The adhesion properties between the corrosion-protecting barrier and the substrate were also studied. This project was focused on process improvements that are realistic to implement in industrial production. The thermal emittance of the absorber was decreased from 0.12 to 0.06 by changing the material of the corrosion-protecting layer from nickel-chromium to copper-nickel. Copper-nickel was less sensitive to variations in the sputter parameters than nickel-chromium. A novel method that could simplify the search for alternative corrosion resistant materials with a low thermal emittance has been purposed. Since resistivity data usually exist or can easily be measured and infrared measurements require more sophisticated measurements, the Hagen-Rubens relation was investigated for copper-nickel and nickel-chromium alloys. The dc-resistivity was found to be related to the infrared emittance or the integrated thermal emittance for alloys in their solid soluble fcc phase. The solar absorbtance was increased when a graded index absorbing coating was tailored for a crossover of the reflectance from low to high reflectance at about 2.5 µm. The solar absorber graded index coating was optimized for nickel metal content in nickel oxide and a solar absorptance of 0.89-0.91 was achieved. The solar absorptance was further increased to 0.97 when an antireflection coating was added on top of the absorbing layer. Finally, extrapolation algorithms were developed to assure correct determination of the thermal emittance for coatings on glass since modern spectrometers that do not cover the complete wavelength interval required to calculate the thermal emittance of surfaces at room temperatures accurately. The error arising from the extrapolation algorithms were smaller than the noise from the optical measurements. Similar strategies can be used for other surfaces.

Absolicon is a pioneering solar technology development company specializing in the manufacturing and selling of advanced solar energy systems engineered to generate renewable energy for diverse use. Comprising essential components such as reflectors (mirrors) and a solar receiver tube, these solar energy systems are equipped to efficiently capture and convert solar irradiation into usable thermal energy. As an integral facet of an ongoing research, this project will contribute to optimize the reflection and absorption capacity in receiver tubes of Absolicon's solar collectors. The aim is to investigate optically selective plasmonic coatings intended as an undercoating in the solar selective surfaces. The main coating material that will be used and analysed is gold due to its plasmonic properties and inert nature as well as its low toxicity. The gold will be coated on stainless steel using physical vapor deposition (PVD) and then annealed at mid-to-high temperatures to produce a plasmonic surface. The effect of Au thicknesses, annealing times/temperature and will be investigated to optimize the coating with regards to optical properties based on a systematic method called Design of Experiments (DoE). The goal for the gold coating is to increase the reflectance in the infrared region while generating a plasmonic absorption peak in the visible region (the position and width will be optimized), making it a more beneficial surface to coat a solar selective surface than the original stainless steel (SS). It was found that the size and inter-particle distance of GNPs depend on the temperature and annealing time for different thickness. The surface analysis from SEM-images and AFM-topographs provided that samples with smaller grains are more likely to exhibit significant plasmonic effects compared to larger grains. According to the surface characterization, either thinner gold coating exposed to high temperature for short annealing time or thicker gold coating with longer annealing time provide plasmonic absorption peak in visible light region.