1 |
Kinetic Modeling of the Adsorption of Mercury Chloride Vapor on Spherical Activated Carbon by Thermogravimetric AnaylysisCHEN, WEI-CHIN 25 August 2004 (has links)
This study investigated the adsorptive capacity and isotherm of HgCl2 onto spherical activated carbons (SAC) via thermogravimetric analysis (TGA). Activated carbon injection (ACI) is thought as the best available control technology (BACT) for mercury removal from flue gas. There are two major forms of vapor-phase mercury, Hgo and Hg2+, of which HgCl2 accounts for 60-95% of total mercury. Mercury emitted from the incineration of municipal solid wastes (MSW) could cause severely adverse effects on human health and ecosystem since it exists mainly in vapor phase due to high vapor pressure. Although the adsorptive capacity of HgCl2 onto activated carbon has been studied in previous adsorption column tests, only a few studies have thoroughly investigated the adsorption isotherms of HgCl2 onto SAC.
Equilibrium and kinetic studies are important towards obtaining a better understanding of mercury adsorption. Many investigations have addressed the relationship between sorption kinetics and equilibrium for different adsorbent/adsorbate combinations. For the removal of vapor-phase mercury, several bench-pilot, and full-scale tests have be proceeded to examine the influence of carbon types, carbon structures, carbon surface characteristics, injection methods (dry or wet), amount of carbon injected, and flue gas temperature on mercury removal. In addition, the dynamics of spherical activated carbons (SAC) adsorbers for the uptake of gas-phase mercury was evaluated as a function of temperature, influent concentration of mercury, and empty-bed residence time. However, only a few studies investigated the adsorption isotherms of HgCl2 onto activated carbons.
In this study, TGA was applied to obtain the adsorptive capacity of HgCl2 onto SAC with adsorption temperature (30~150oC) and influent HgCl2 concentration (50~1,000£gg/m3). Experimental results indicated that the adsorptive capacity of HgCl2 onto SAC was 0.67and 0.20 mg/gC at 30¡B70 and 150oC, respectively. This study investigated the adsorptive capacity of HgCl2 vapor onto SAC via TGA analysis. Experimental results indicated that the adsorptive capacity of SAC decreased with the increase of the adsorption temperature. Furthermore, the results suggested that that the adsorption of SAC on HgCl2 vapor was favorable equilibrium at 30 and 70¢J and unfavorable equilibrium at 150¢J. In comparison of the experimental data with isotherm equations, Freundlich isotherm fitted the experimental results better than Langmuir isotherm. The model simulations were found to fit very well to the high concentration experimental kinetic data for both adsorption and desorptionusing two adjust parameter, effective diffusivity, and the Freundlich isothermexponent.¡@The extracted model parameter, effective diffusivity and n, were then used to predict the experimental kinetic data for the same combination at other concentrations.
|
2 |
Adsorption and Desorption of Mercury Chloride on Sulfur-impregnated Activated Carbon by Thermogravimetric Analysis (TGA)Syue, Sheng-Han 27 August 2008 (has links)
This study investigated the adsorptive and desorption capacity of HgCl2 onto powdered activated carbon derived from carbon black of pyrolyzed waste tires (CPBAC) via thermogravimetric analysis (TGA).
Due to incomplete classification and recycling of municipal solid wastes (MSW), they still mix with a lot of hazardous materials, which unfortunately can not be removed by incinerators and air pollution control devices(APCDs). Among them, mercury and its pollutants attract more attention by people. Mercury and its pollutants emitted from the incineration of municipal solid wastes could cause severely adverse effects on human health and ecosystem since they exist mainly in vapor phase due to high vapor pressure. If they can not be remove by the air pollution control devices, they will be emitted to the atmosphere and cause serious effects on environmental ecology via various routes.
Activated carbon has been widely applied to the treatment of organic compounds and heavy metals in wastewater and waste gas stream. However, the adsorptive capacity of activated carbon decreases with adsorption temperature. The low adsorptive capacity of activated carbon at high temperature (>150 oC) can be overcome by impregnated activated carbons. Previous study reported that sulfur impregnated powdered activated carbons could effectively remove the vapor-phase elemental mercury (Hgo) emitted from MSW incinerators and utility power plants. However, the impregnated typically used is sulfur (S) which is solely applied for the adsorption of elemental mercury (Hgo). Besides, these studies seldom investigate the distribution of impregnated sulfur in the inner pores of activated carbon and its effects on the specific surface area and pore size distribution. Thus, this study was to investigate the fundamental mechanisms for the adsorption/desorption of HgCl2 by/from sulfur impregnated PAC.
Experimental results indicated that the sulfur content of sulfur impregnated CBPAC decreased with increasing impregnation temperatures form 400 to 650 oC; while the surface area of sulfur impregnated CBPAC increased with impregnation temperatures. In this study, TGA was applied to obtain the adsorptive capacity of HgCl2 onto CBPAC with adsorption temperature (150oC) and influent HgCl2 concentration (100~500 £gg/m3). Experimental results indicated that the adsorptive capacity of CBPAC increased with the increase of influent HgCl2 concentration and surface area of the activated carbon. This study revealed that the impregnation of sulfur on CBPAC could increase its adsorption capacity at high temperatures.
Desorption experimental parameters included desorption temperature (400, 500, and 600 oC), heating rate (10, 15, and 20 oC /min) and regeneration cycle (1~7 cycles). In probing into the regeneration efficiency of CBPAC, experiments were conducted at the desorption times of 60 and 30 min. The results suggested the regeneration efficiency of carbon under 30 min was generally highter than that under 60 min. Because the desorption time was more longer and the sulfur content was lesser. Therefore, the regeneration times was reduce. Experimental results indicated that the mechanism of HgCl2 desorption from the spent CPBAC was strongly affected by desorption temperature. Both the desorption efficiency and the desorption rate of HgCl2 increased dramatically with desorption temperature. The desorption heat of HgCl2 (823 KJ/mole) was much higher than the vaporization heat of HgCl2 (59.2 KJ/mole), indicating that the adsorption of HgCl2 on sulfur impregnated CBPAC was chemical adsorption. Consequently, raising desorption temperature could enhance the desorption of HgCl2 and shorten the duration for HgCl2 desorption. Moreover, the formation of HgS during the desorption of HgCl2 from activated carbons can be proved by the surface characteristics of sulfur impregnated activated carbons. Results obtained from the regeneration of sulfur impregnated activated carbons indicated that the regeneration cycles decreased as the desorption duration increased. It was attributed to the potential desorption of sulfur from actived carbons, which thus decreased the adsorptive capacity and the regeneration cycles.
|
3 |
Synthesis, characterization and application of amine-modified Macadamia nutshell adsorbents and ion imprinted polymers for the sequestration of Cr(VI) ions from aqueous solutionNchoe, Obakeng Boikanyo 08 1900 (has links)
M. Tech (Department of Chemistry, Faculty of Applied and Computer Sciences) Vaal University of Technology. / Persisting challenges associated with remediation of heavy metals from aqueous media have stirred the need for enhancement of current technologies. Cellulosic agro waste materials (AWM) as well as ion-imprinted polymers (IIP) have received ardent attention from researchers. These materials are often employed in the following industries: water and wastewater treatment, medical, pharmaceutical and packaging. Applications in water and wastewater treatment have gained significant interest due to desirable features they possess. In the case of AWM, these features include a tuneable surface area and poor porosity, basic surface functional groups and chemical stability. Some desired features in IIP include adsorption sites compatible for the ion imprint obtained after leaching with suitable reagents, rigidity and reusability. The efficacy of employing AWM and IIP for the remediation of toxic chromium from aqueous solution was explored. The current study is made up of part A and B. In part A, Macadamia nutshell powder was treated using HNO3, NaOH, as well as Fenton’s reagent. The three materials underwent a new modification which involved reacting treated adsorbents with cetyltrimethylammonium chloride (CTAC), followed by immobilization of 1,5' diphenylcarbazide (DPC) ligand. The adsorbents were ultimately washed, dried and stored for Cr(VI) batch adsorption experiments. Part B involved a synthesis of IIP and their non-imprinted polymer counterpart (NIP) for Cr(VI) sequestration in aqueous solution. This was done by precipitation polymerization of functional monomers, crosslinker and DPC-Cr(VI) complex as a template. Non-imprinted polymers were fashioned in a manner like that of IIP but with the exclusion of Cr(VI) ion template.
Characterizations of the adsorbents were done using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray fluorescence (XRF), and carbon, hydrogen, nitrogen and sulphur (CHNS) analyzer. Batch adsorption experiments were done and parameters such as solution pH, adsorbent dosage, initial Cr(VI) concentration and contact time were optimized.
Working solutions were analyzed using ultraviolet-visible (UV-Vis) and atomic absorption (AA) spectroscopy. Adsorption parameters found to be optimum for DPC immobilized cellulosic adsorbents were pH 1.4, adsorbent mass of 0.1 g, 100 mg/L initial concentration and 125 minutes of contact time. The adsorption parameters determined to be optimum for IIP and NIP were pH 2.6, 0.2 g adsorbent mass, 80 mg/L initial concentration and 240 minutes of contact time. Reusability studies demonstrated the potential of adsorbents to remove Cr(VI) ions from aqueous media after successive adsorption-desorption cycles. Selectivity studies indicated that DPC immobilized adsorbents as well as IIP were able to selectively adsorb Cr(VI) ions from aqueous media in the presence of Zn(II), Cu(II), Co(II) and NI(II) ions. Kinetic models revealed that DPC immobilized cellulosic adsorbents and synthetic IIP were most fitting for pseudo-second order and pseudo first order, respectively. On the other hand, adsorption isotherm studies demonstrated that DPC immobilized cellulosic adsorbents and synthetic polymers were best fit for Freundlich and Langmuir adsorption isotherm, respectively.
|
4 |
Applications of Thermal and Laser-Based Methods for Monitoring Airborne Particulates in Coal MinesPhillips, Kent Thomas 22 September 2017 (has links)
The purpose of this thesis is to examine applications of thermal and laser-based methods to monitor airborne particulates in underground coal mines. Specifically, coal and mixed mineral mine dust, as well as, diesel particulate matter (DPM). These particulates have historically, and continue to have, significant health impacts on underground miners. Chapters 1 and 2 of this thesis concentrate on using a novel method of thermogravimetric analysis (TGA) to characterize respirable coal and mixed mineral mine dust and presents the results of this method being applied to samples collected in Appalachia coal mines. Appalachia has been a geographic "hotspot" for the rise in occupational lung disease amongst underground coal miners, which began in 1990's after decades of steady decline. This has led researchers to propose there could be something unique about the respirable dust composition in Appalachia coal mines, which resulted in the surge of lung disease cases; however, the knowledge base regarding the actual composition of respirable coal mine dust is limited. The results of this thesis show that most of the mass fraction of respirable Appalachia coal mine dust is not coal, but rather carbonates and non-carbonate minerals (i.e. silica and silicates). These findings are significant as many researchers now suspect silica and silicates to be the true culprit in the occupational lung disease of coal miners.
DPM presents an additional occupational health hazard to underground coal miners where diesel equipment is used and is difficult to monitor due to its complex nature. In underground metal/non-metal mines, airborne DPM is regulated and monitored using carbon surrogates. However, due to the potential interference from coal-sourced carbon, DPM in coal mines is monitored only by taking samples at the tailpipe of each piece of equipment. This thesis aims to investigate the potential for a laser-based instrument, the FLIR Airtec, to be used in underground coal mines. In particular, what effect the coal dust will have on the instrument, as it measures DPM by way of elemental carbon (EC). The results of this study show that while the Airtec will not over-estimate coal-sourced EC, there could be some sampling artifacts associated with its operation in coal mines, which may inhibit its effectiveness. / Master of Science
|
5 |
Development and Implementation of a Standard Methodology for Respirable Coal Mine Dust Characterization with Thermogravimetric AnalysisScaggs, Meredith Lynne 20 July 2016 (has links)
The purpose of this thesis is to examine the potential of a novel method for analysis and characterization of coal mine dust. Respirable dust has long been an industry concern due to the association of overexposure leading to the development occupational lung disease. Recent trends of increased incidence of occupational lung disease in miners, such as silicosis and Coal Workers Pneumoconiosis, has shown there is a need for a greater understanding of the respirable fraction of dust in underground coal mines. This study will examine the development of a comprehensive standard methodology for characterization of respirable dust via thermogravimetric analysis (TGA). This method was verified with laboratory-generated respirable dust samples analogous to those commonly observed in underground coal mines.
Results of this study demonstrate the ability of the novel TGA method to characterize dust efficiently and effectively. Analysis of the dust includes the determination of mass fractions of coal and non-coal, as well as mass fractions of coal, carbonate, and non-carbonate minerals for larger respirable dust samples. Characterization occurs through the removal of dust particulates from the filter and analysis with TGA, which continuously measures change in mass with specific temperature regions associated with chemical changes for specific types of dust particulates. Results obtained from the verification samples reveal that this method can provide powerful information that may help to increase the current understanding of the health risks linked with exposure to certain types of dust, specifically those found in underground coal mines. / Master of Science
|
6 |
An Improved Thermogravimetric Analysis Method for Respirable Coal Mine Dust and Comparison to Results by SEM-EDXAgioutanti, Eleftheria 24 July 2019 (has links)
It has long been known that chronic exposures to high concentrations of respirable coal mine dust can lead to the development of lung diseases such as Coal Worker's Pneumoconiosis, commonly referred to as "black lung", and silicosis. Since the mid-1990s, an alarming resurgence of diseases has been documented in central Appalachia, where underground mining often necessitates significant extraction of rock strata along with the thin seams of coal. These circumstances have prompted concern over if or how changing dust composition might be a factor in contemporary disease prevalence.
Until now, the total mass concentration and quartz mass fraction of respirable dust have been regulated and monitored in US coal mines. Unfortunately, however, these two metrics alone do not paint a full picture of dust composition. Earlier work in the author's research group established a preliminary thermogravimetric analysis (TGA) method for coal mine dust. The method is intended to allow estimation of three key mass fractions of the dust from separate sources: coal from the coal strata being mined; non-carbonate minerals from the rock strata being mined or drilled; and carbonates that are primarly sourced from application of rock dust products to the mine floor or ribs. However, accuracy of the preliminary method was substantially limited by poor dust recovery from the fibrous filter media used for sample collection.
This thesis includes two studies: The first study aims to establish an improved TGA method. It uses smooth polycarbonate (PC) filters for dust sampling and a modified thermal ramping routine. The method is verified using laboratory-generated respirable dust samples. In the second study, the improved TGA method is used to analyze 75 respirable mine dust samples, collected in 15 US mines. Replicate samples are also analyzed by scanning electron microscopy using energy dispersive X-ray (SEM-EDX). TGA and SEM-EDX results are compared to gain insights regarding the analytical methods and general trends in dust composition within and between mines. / Master of Science / It has long been known that chronic exposures to excessive respirable coal mine dust can lead to the development of lung diseases such as Coal Worker’s Pneumoconiosis (“Black Lung”) and silicosis. Disease rates in central Appalachia have shown an alarming and unexpected increase since the mid-1990s, despite declining dust concentrations evident from regulatory compliance monitoring data. Clearly, there is a need to better understand coal mine dust composition, which will require additional analytical methods. Thermogravimetric analysis (TGA) has been proposed as one possible method, because it should allow estimation of three key dust components from separate sources: coal from the coal strata being mined; non-carbonate minerals from the rock strata being mined or drilled; and carbonates from application of rock dust products to the mine floor and ribs. However, preliminary work with TGA showed limited accuracy, mostly due to sampling materials. In this thesis, two studies were performed. The first study aims to establish an improved TGA method using smooth, polycarbonate (PC) filters. The second study demonstrates the method on a large number of mine dust samples, and compares the results to those gained by an alternative method that uses electron microscopy.
|
7 |
Application of a TGA Method to Estimate Coal, Carbonate, and Non-carbonate Mineral Fractions as a Proxy for the Major Sources of Respirable Coal Mine DustJaramillo Taborda, Maria Lizeth 16 November 2021 (has links)
Inhalation of respirable dust in coal mines is a serious occupational health hazard which can lead to the development of chronic and irreversible lung diseases, such as Coal Worker's Pneumoconiosis (CWP) and Progressive Massive fibrosis (PMF). After the passage of the Federal Coal Mine Health and Safety Act (CMHSA) in the late 1960's the prevalence of CWP among US coal miners decreased. However, since the late 1990's a resurgence of lung diseases has been reported, particularly in central Appalachia. On the other hand, dust monitoring data suggest that concentrations of respirable coal mine dust (RCMD) and crystalline silica have been on a downward trend. This contradiction has prompted keen interest in detailed characterization of RCMD to shed light on dust constituents-and their sources. Such information might help miners understand where and under what conditions specific sources contribute to RCMD, and how dust controls and monitoring could be enhanced to mitigate the exposure to respirable hazards.
Respirable dust particles generated in coal mines are generally associated with three primary sources: the coal strata that is mined and generates mostly coal particles that could contribute for lung diseases, the rock strata that is cut along with the coal and generates most of the respirable silica and silicates, and the rock dust products that are the main source of carbonates which could produce respiratory irritations.
Thermogravimetric Analysis (TGA) is one of many analytical tools that might be used for dust characterization. Its primary benefit is that it can be used to apportion the total sample mass into three mass fractions (i.e., coal, carbonates, non-carbonates) which should be roughly associated with the primary dust sources (i.e., coal strata, rock dust products, rock strata) in many coal mines.
This thesis consists of two main chapters: Chapter 1, outlines the research motivation, recaps the efforts to establish a standard TGA method for RCMD, and shows results of the validation experiments that were performed in the current work to enable application of the TGA method to a large set of RCMD and laboratory-generated dust samples. In Chapter 2, 46 lab-generated samples from primary dust source materials collected in 15 coal mines, and 129 respirable dust samples from 23 US coal mines are analyzed using the TGA method validated in Chapter 1. Results for both sets of samples are presented and the mine samples are interpreted based on sampling location, mining method and region. Additionally, Chapter 3 summarizes recommendations for future work. / Master of Science / The chronic exposure to dust generated in underground coal operations represents a serious health concern among coal miners that can lead to the development of lung diseases such as Coal Workers Pneumoconiosis (CWP or "black lung). Despite of dust compliance monitoring data that have shown that the concentrations of dust have been declining, since the late 1990's the number of US coal miners diagnosed with lung diseases has been increasing, especially in central Appalachia. This contradiction has prompted keen interest in detailed characterization of respirable coal mine dust (RCMD) to shed light on dust constituents-and their sources. Such information might help miners understand where and under what conditions specific sources contribute to RCMD, and how dust controls and monitoring could be enhanced to mitigate the exposure to respirable hazards.
Thermogravimetric Analysis (TGA) has been proposed as an alternative approach for dust characterization. Its primary benefit is that it can be used to apportion the total sample mass into three mass fractions (i.e., coal, carbonates, non-carbonates) which should be roughly associated with the primary dust sources (i.e., coal strata, rock dust products, rock strata) in many coal mines.
This thesis consists of two main chapters: Chapter 1, outlines the research motivation, recaps the efforts to establish a standard TGA method for RCMD, and shows results of the validation experiments that were performed in the current work to enable application of the TGA method to a large set of RCMD and laboratory-generated dust samples. In Chapter 2, 46 lab-generated samples from primary dust source materials collected in 15 coal mines, and 129 respirable dust samples from 23 US coal mines are analyzed using the TGA method validated in Chapter 1. Results for both sets of samples are presented and the mine samples are interpreted based on sampling location, mining method and region. Additionally, Chapter 3 summarizes recommendations for future work.
|
8 |
Application of Thermogravimetric Analysis (TGA) Technique on Adsorption Capacity and Adsorption and Desorption Kinetics of Sulfur-impregenated Activated Carbon Saturated with Gaseous Mercury ChlorideChen, Wei-chin 09 July 2010 (has links)
The objective of this study is to investigate the influence of sulfur compounds (S and Na2S) for powdered activated carbon derived from carbon black of pyrolyzed waste tires (CPBAC). Besides, this study investigated the distribution of impregnated sulfur in the inner pores of activated carbon and its effected on the specific surface area and pore size distribution. This study investigated the fundamental mechanisms by analysis of thermodynamic properties and to establish the kinetic models for the adsorption/desorption of HgCl2 by/from sulfur impregnated CBPAC. Furthermore, this study investigated the adsorptive and desorption capacity of HgCl2 onto CPBAC via thermogravimetric analysis (TGA).
Experimental results indicated that the specific surface area of sulfur impregnated CBPAC with elemental S (S0) was larger than sulfur impregnated CBPAC with Na2S. Besides, the sulfur content of sulfur impregnated CBPAC increased with increasing the surface area of CBPAC under the same impregnated temperature. And, the adsorptive capacity of CBPAC increased with the increase of influent HgCl2 concentration and surface area of the activated carbon. According to the experimental results of the adsorption capacity under the differential sulfur content, its indicated that the affection of sulfur content for adsorption capacity of HgCl2 was much than HgCl2 concentration and surface area of the activated carbon.
The desorption energys were 266 and 282 kJ/mole for HgCl2 desorption from saturated CBPAC-S0 and CBPAC-Na2S, respectively. The results showed the process of HgCl2 adsorption onto CBPAC was in favor of a physisorbed state of HgCl2 at the adsorption temperature of 150 oC but the process of HgCl2 adsorption onto CBPAC which impregated was in favor of a chemisorbed state of HgCl2 at the adsorption of 150 oC. The value of ∆G for CBPAC at the adsorption temperature of 30 ~150 oC were ranged from -15.28 kJ/mole to -26.63 kJ/mole. The value of ∆G for CBPAC-S0 at the adsorption temperature of 30~150 oC ranged from -23.45 kJ/mole to -32.09 kJ/mole. The value of ∆G for CBPAC-Na2S at the adsorption temperature of 30~150 oC ranged from -22.84 kJ/mole to -32.72 kJ/mole. The results showed negative values of ∆G confirmed the feasibility of adsorption process and the spontaneous nature for the adsorption of HgCl2. The value of ∆H for CBPAC at the adsorption temperature of 30 ~150 oC ranged from -35.58 kJ/mole to -35.82 kJ/mole. The value of ∆H for CBPAC-S0 at the adsorption temperature of 30 ~150 oC ranged from -38.07 kJ/mole to -52.49 kJ/mole. The value of ∆H for CBPAC-Na2S at the adsorption temperature of 30~150 oC was -37.45 kJ/mole to -53.12 kJ/mole. A negative ∆H suggested that the adsorption of HgCl2 is an exothermic process. Besides, the adsorptive behavior of HgCl2 for two activated carbons (CBPAC-Na2S and CBPAC-S0) at high temperature (110 ¢J and 150 ¢J ) was the same chemical reaction mechanism due to the same ∆H. Besides, the results of model simulation indicated that modified adsorption kinetic model based on pore diffusion scheme developed in this study could successfully simulate the transport and adsorption of HgCl2 by considering the chemical reaction within the inner pores of carbon grains at 150 oC.
|
9 |
The effect of carboxylic acids on the size and shape of Co3O4 nanoparticles: used as capping molecules and ligands in the preparation methodThabede, P. M. 12 September 2017 (has links)
M.Tech. (Department of Chemistry, Faculty of Applied and Computer Sciences), Vaal University of Technology / This study reports the synthesis and characterization of cobalt oxide nanoparticles using a microwave technique and chemical precipitation with oxidation method. Cobalt complexes were prepared using carboxylic acids (acetic acid, heptanoic acid, and stearic acid) as ligands. The complexes were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA) and Elemental analyses (EA). Cobalt oxide nanoparticles were synthesized from the complexes via a microwave-assisted technique. A precipitation oxidation preparation reaction was used varying different parameters like pH, time, oxidising agent, heating method and cobalt precursor. The use of the cobalt nitrate and cobalt acetate as cobalt precursors resulted in spherical and cubic nanoparticles respectively. Cobalt precursors containing a longer hydrocarbon chain length, for instance cobalt heptanoate, did not yield cobalt oxide nanoparticles with the precipitation oxidation reaction due non- solubility of the complex. Using cobalt acetate as precursor, an increase in the pH from 7.91 to 10.18 caused the cobalt oxide nanoparticles shape to become well defined cubes with a narrower size range and CoOOH needles formed when the pH was further increased to 12.26. The optimum pH of 10.18 yielded cubic cobalt oxide particles having an average size of 25.45 nm with a standard deviation of 6.12. The nanoparticle size decreased from 35.70 nm to 4.45 nm when the oxygen oxidant was replaced with hydrogen peroxide. Conventional heating with a hotplate yielded nanoparticles with a more homogenous shape and size than microwave heating. The size of the nanoparticles increased from 22.81 nm to 25.45 nm when reaction time changed from 16 hours to72 hours.
|
10 |
Assessing the Feasibility of Poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and Poly-(lactic acid) for Potential Food Packaging ApplicationsModi, Sunny J. 25 August 2010 (has links)
No description available.
|
Page generated in 0.1017 seconds