by Hui Koon-chung = 由電子束照射引起氧化金屬膜覆蓋的氧化鋅之光學特性 / 許冠中. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2004. / Includes bibliographical references (leaves 87-89). / Text in English; abstracts in English and Chinese. / by Hui Koon-chung = You dian zi shu zhao she yin qi yang hua jin shu mo fu gai de yang hua xin zhi guang xue te xing / Xu Guanzhong. / ABSTRACT --- p.i / ACKNOWLEDGMENTS --- p.iii / TABLE OF CONTENTS --- p.iv / LIST OF FIGURES --- p.vi / LIST OF TABLES --- p.x / Chapter 1. --- Introduction --- p.1 / Chapter 1.1 --- Motivation --- p.1 / Chapter 1.2 --- Overview of ZnO / Chapter 1.3 --- Overview of the Thesis / Chapter 2. --- Experimental conditions and procedures --- p.11 / Chapter 2.1 --- Samples preparation / Chapter 2.2 --- Optical and electrical Characterizations of ZnO / Chapter 2.2.1 --- Setup of cathodoluminescence (CL) spectroscopy / Chapter 2.2.2 --- Setup of photoluminescence (PL) spectroscopy / Chapter 2.2.3 --- Setup of photoconductivity measurement / Chapter 2.2.4 --- Setup of atomic force microscopy AFM / Chapter 2.2.5 --- X-ray photoelectron spectroscopy (XPS) / Chapter 3. --- Experimental results and data analysis --- p.21 / Chapter 3.1 --- The luminescence of ZnO --- p.21 / Chapter 3.2 --- Effects of metal capped layer in luminescence --- p.24 / Chapter 3.3 --- Optical memory effect of A1 capped ZnO --- p.28 / Chapter 3.4 --- The XPS study ofAl capped ZnO --- p.33 / Chapter 3.5 --- Optical properties and photoconductivity studies of AlOx-capped ZnO --- p.35 / Chapter 3.6 --- Time- and Electron-dose dependent CL of AlOx capped ZnO --- p.41 / Chapter 3.7 --- Dependence of band-edge enhancement on Deep Level to band-edge emission ratio --- p.53 / Chapter 3.8 --- Temperature-dependent CL of AlOx capped ZnO --- p.56 / Chapter 3.9 --- Electrical measurement of luminescence enhanced ZnO --- p.64 / Chapter 4. --- Discussion --- p.69 / Chapter 4.1 --- General discussion --- p.69 / Chapter 4.2 --- The effect of AlOx capping on the optical properties of ZnO --- p.70 / Chapter 4.3 --- The action of e-beam irradiation on the enhancement of band-edge emission --- p.73 / Chapter 4.4 --- The function of AlOx layer when under electron irradiation --- p.83 / Chapter 5. --- Conclusions --- p.85 / Reference --- p.87

Lai Chun Hei Gary = 錳氧化物-鈮摻雜之鈦酸鍶異構結的輸運特性 / 黎鎮禧. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2005. / Includes bibliographical references. / Text in English; abstracts in English and Chinese. / Lai Chun Hei Gary = Meng yang hua wu-ni shan za zhi tai suan si yi gou jie de shu yun te xing / Li Zhenxi. / Acknowledgement --- p.i / Abstract --- p.ii / 論文摘要 --- p.iv / Table of contents --- p.vi / List of Figures --- p.x / List of Tables --- p.xv / Chapter Chapter 1 --- Introduction / Chapter 1.1 --- Introduction to perovskite manganites and niobium doped strontium titanate --- p.1-1 / Chapter 1.1.1 --- Structure and properties of perovskite manganites --- p.1-1 / Chapter 1.1.2 --- Structure and properties of niobium doped strontium titanate --- p.1-4 / Chapter 1.1.3 --- Phase transition in perovskite manganites --- p.1-9 / Chapter 1.1.4 --- Charge ordering and small polaron theory in PCMO --- p.1-15 / Chapter 1.1.5 --- Colossal Magnetoresistance (CMR) in perovskite manganites --- p.1-19 / Chapter 1.16 --- Review of semiconducting junction between perovskite manganites and niobium doped strontium titanate --- p.1-23 / Chapter 1.2 --- Research motivation --- p.1-28 / Chapter 1.3 --- Scope of this thesis --- p.1-29 / References --- p.1-31 / Chapter Chapter 2 --- Experimental details / Chapter 2.1 --- Thin film deposition --- p.2-1 / Chapter 2.1.1 --- Facing-target sputtering --- p.2-1 / Chapter 2.1.2 --- Vacuum system --- p.2-3 / Chapter 2.1.3 --- Fabrication and characterization of manganites targets --- p.2-4 / Chapter 2.1.4 --- Substrate --- p.2-7 / Chapter 2.1.5 --- Deposition procedure --- p.2-8 / Chapter 2.1.6 --- Silver electrode coating apparatus --- p.2-10 / Chapter 2.2 --- Annealing systems --- p.2-12 / Chapter 2.2.1 --- Vacuum annealing system --- p.2-12 / Chapter 2.2.2 --- Oxygen annealing system --- p.2-14 / Chapter 2.3 --- Characterization --- p.2-16 / Chapter 2.3.1 --- Profilometer --- p.2-16 / Chapter 2.3.2 --- X-ray diffractometer --- p.2-16 / Chapter 2.3.3 --- Resistance measurement system --- p.2-18 / Chapter 2.3.4 --- Current-voltage characteristics measurement system --- p.2-20 / References --- p.2-23 / Chapter Chapter 3 --- Epitaxial LCMO/STON heterojunction / Chapter 3.1 --- Four point and two point I-V measurement --- p.3-1 / Chapter 3.2 --- Magnetic phase transition of LCMO revealed by four point I-V measurement of LCMO/STON heteroj unction --- p.3-8 / Chapter 3.3 --- Oxygen annealing effect on LCMO/STON heteroj unction --- p.3-14 / Chapter 3.4 --- Positive colossal Magnetoresistance in LCMO/STON heteroj unction --- p.3-16 / References --- p.3-23 / Chapter Chapter 4 --- Epitaxial PCMO/STON heterojunction / Chapter 4.1 --- Ohmic contact for PCMO thin films --- p.4-1 / Chapter 4.2 --- PCMO charge ordering and magnetic phase transition --- p.4-9 / Chapter 4.3 --- Four point I-V measurement of PCMO/STON heterojunction --- p.4-14 / References --- p.4-16 / Chapter Chapter 5 --- Epitaxial LCMO/PCMO/STON junction / Chapter 5.1 --- Tunneling junction fabrication --- p.5-1 / Chapter 5.2 --- Structural characterizations --- p.5-2 / Chapter 5.3 --- PCMO magnetic phase transition revealed by I-V measurement of LCMO/PCMO/STON tunneling junction --- p.5-3 / Chapter 5.4 --- Energy band structure of perovskite manganites --- p.5-11 / Chapter 5.4.1 --- Introduction to energy band of perovskite manganites and STON --- p.5-11 / Chapter 5.4.2 --- Temperature dependent band structure of LCMO explained by diffusion voltage of LCMO/STON heterojunction --- p.5-18 / References --- p.5-22 / Chapter Chapter 6 --- Conclusions / Chapter 6.1 --- Conclusion --- p.6-1 / Chapter 6.2 --- Future outlook --- p.6-3

In this thesis we derive mathematical models for the glass sheet redraw process for the production of very thin glass sheets. In the redraw process, a prefabricated glass block is fed into a furnace, where it is heated and stretched by the application of draw rollers to reduce its thickness. Redrawn sheets may be used in various applications including smartphone and battery technology. Our aims are to investigate the factors determining the final thickness profile of a glass sheet produced by this process, as well as the growth of out-of-plane deformations in the sheet during redraw. Our method is to model the glass sheet using Navier–Stokes equations and free-surface conditions, and exploit small aspect ratios in the sheet to simplify and solve these equations using asymptotic expansions. We first consider a simple two-dimensional sheet to determine which physical effects should be taken into account in modelling the redraw process. Next, we derive a mathematical model for redraw of a thin threedimensional sheet. We consider the limits in which the heater zone is either short or long compared with the sheet half-width. The resulting reduced models predict the thickness profile of the redrawn sheet and the initial shape required to redraw a product of uniform thickness. We then derive mathematical models for buckling of thin viscous sheets during redraw. For buckling of a two-dimensional glass sheet due to gravity-induced compression, we predict the evolution of the centreline and investigate the early- and late-time behaviour of the system. For a three-dimensional glass sheet undergoing redraw, we use numerical solutions to investigate the behaviour of the sheet mid-surface.

by Gao Yun. / "November 2002." / Thesis (Ph.D.)--Chinese University of Hong Kong, 2002. / Includes bibliographical references (p. 165-171). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Mode of access: World Wide Web. / Abstracts in English and Chinese.

by Chiah Man Fat. / "March 2004." / Thesis (Ph.D.)--Chinese University of Hong Kong, 2004. / Includes bibliographical references. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Mode of access: World Wide Web. / Abstracts in English and Chinese.

Xu Xiangdong. / "December 2001." / Thesis (Ph.D.)--Chinese University of Hong Kong, 2001. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Mode of access: World Wide Web. / Abstracts in English and Chinese.

"August 2003." / Thesis (Ph.D.)--Chinese University of Hong Kong, 2003. / Includes bibliographical references. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Mode of access: World Wide Web. / Abstracts in English and Chinese.

Filmes finos de TiO2 foram crescidos sobre silício (100) através do processo de deposição química de organometálicos em fase vapor (MOCVD). Os filmes foram crescidos a 400, 500, 600 e 700ºC em um equipamento horizontal tradicional. Tetraisopropóxido de titânio foi utilizado como fonte tanto de titânio como de oxigênio. Nitrogênio foi utilizado como gás de arraste e como gás de purga. Foram realizadas análises de difração de raios-x para a caracterização da estrutura cristalina. Microscopia eletrônica de varredura com canhão de emissão de campo foi utilizada para a avaliação da morfologia e da espessura dos filmes. Os filmes de TiO2 crescidos a 400 e a 500ºC apresentaram fase anatase. O filme crescido a 600ºC apresentou as fases anatase e rutilo, enquanto que o filme crescido a 700ºC apresentou, além de anatase e rutilo, a fase broquita. Para se avaliar o comportamento eletroquímico dos filmes foi utilizada a técnica de voltametria cíclica. Os testes indicaram um forte caráter capacitivo dos filmes de TiO2. O pico de corrente anódica é diretamente proporcional à raiz quadrada da velocidade de varredura para os filmes crescidos a 500ºC, sugerindo que o mecanismo predominante de transporte de cátions seja por difusão linear. Observou-se que o filme crescido por 60 minutos permitiu maior facilidade de intercalação e desintercalação de íons Na+. Os filmes crescidos nas demais condições não apresentaram pico de corrente anódica, embora o acúmulo de cargas se fizesse presente. / Titanium dioxide (TiO2) thin films were grown on silicon substrate (100) by MOCVD process (chemical deposition of organometallic vapor phase). The films were grown at 400, 500, 600 and 700 ° C in a conventional horizontal equipment. Titanium tetraisopropoxide was used as source of both oxygen and titanium. Nitrogen was used as carrier and purge gas. X-ray diffraction technique was used for the characterization of the crystalline structure. Scanning electron microscopy with field emission gun was used to evaluate the morphology and thickness of the films. The films grown at 400 and 500°C presented anatase phase. The film grown at 600ºC presented rutile besides anatase phase, while the film grown at 700°C showed, in addition to anatase and rutile, brookite phase. In order to evaluate the electrochemical behavior of the films cyclic voltammetry technique was used. The tests revealed that the TiO2 films formed exclusively by the anatase phase exhibit strong capacitive character. The anodic current peak is directly proportional to the square root of the scanning rate for films grown at 500ºC, suggesting that linear diffusion is the predominant mechanism of cations transport. It was observed that in the film grown during 60 minutes the Na+ ions intercalate and deintercalate easily. The films grown in the other conditions did not present the anodic current peak, although charge was accumulated in the film.

Thesis. 1978. Ph.D.--Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING. / Includes bibliographical references. / Ph.D.

Made available in DSpace on 2014-06-11T19:31:03Z (GMT). No. of bitstreams: 0 Previous issue date: 2009-08-06Bitstream added on 2014-06-13T20:41:13Z : No. of bitstreams: 1 queiroz_dp_dr_bauru.pdf: 2041395 bytes, checksum: 33bdbc4d7c9e68649880f4ff3ab88b31 (MD5) / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / Neste trabalho eletrodos interdigitados depositados sobre substratos de vidro foram recobertos com filmes de óxido de titânio, óxido de titânio dopado com prata e quitosana/PS-119® e foram usados como sensores tendo como objetivo principal se estudar medidas de capacitância elétrica em função da frequência em misturas de etanol e água. Os resultados mostraram que a formação da dupla camada na interface do líquido com a superfície do sensor contribui de maneira muito significativa para as capacitância dos sensores na região de baixa frequência. Nas altas frequência, a resposta dos sensores é independente da frequência e devida principalmente ao líquido que envolve o sensor, havendo uma variação sistemática da capacitância com a concentração de água nas misturas com etanol. O sensor de óxido de titânio foi usado para estabelecer uma curva de calibração, na frequência de 1 MHz, para identificação de percentuais de água em etanol. O conjunto formado pelos três sensores com filmes e um sensor sem filme foi usado para compor uma língua eletrônica para avaliação de etanol, água e suas misturas. A língua foi capaz de distinguir vários tipos de amostras desde que fossem saturadas com cloreto de sódio. / In this work interdigitated electrodes deposited on the top of a glass slide covered with titanium oxide, titanium oxide doped with silver and chitosan/PS-119 thin films were used as sensors aiming mainly to study measurements of the electric capacitance as function of frequency in mixtures of water in ethanol. Results showed that most important contribution to the sensor response in the low frequency is due to the electric double layer formed on the interface of the liquid and sensor surface. In high frequency, the sensor response is only due to the liquid around the sensor, where there is a systematic variation on the percentage of water in ethanol. The titanium oxide sensor was used to obtain a calibration curve, at 1 MHz, to measure the percentage of water in ethanol. The se of sensors with thin films and one uncovered with thin film were employed to form an electronic tongue for evaluation of ethanol, water and their mixtures. The electronic tongue was able to distinguish the samples only if saturated with sodium chloride.