1 |
Along-strike changes in the active tectonic configuration of the northwestern Himalaya: insights from landscape morphology, erosion rates, and river profilesMearce, Trevor 20 December 2017 (has links)
Geodetic models suggest that much of the convergence across the Himalaya (~20 mm yr-1) is taken up on the Main Himalayan Thrust, the main decollement beneath the Himalayan orogenic wedge. In Central Nepal and the majority of Northwest India, several geomorphic, geophysical and seismological datasets indicate that this decollement has a mid-crustal ramp that continues uninterrupted for hundreds of kilometers along strike from Nepal in the east to Uttarakhand in the west. In this study, I use spatial analyses of elevation, relief, channel steepness indices, and basin-wide erosion rates from cosmogenic 10-Be concentrations to outline a potential large-scale change in the active fault configuration between the Main Himalayan Thrust and Main Boundary Thrust near longitude 77°E in the Northwestern Indian Himalaya. The physiography in the areas to the east of 77ºE appears similar to that observed along much of the Himalaya where topographic relief, erosion rates, and river channel steepness (ksn <200) remain relatively low in the areas to the south of a line known as the Physiographic Transition-2. North of the Physiographic Transition-2, these metrics increase sharply within a 30-km zone due to higher rock uplift rates above a mid-crustal ramp on the decollement or an unidentified out-of-sequence thrust fault that soles to the decollement. Either of these models are perceivable with a duplex growing by underplating of the Indian plate into the Himalayan orogenic wedge contributing to higher rock uplift rates north of the Physiographic Transition-2. To the west of 77ºE, however, the landscape morphology indicates the Main Boundary Thrust makes a northward bend coinciding with the along-strike termination of the Physiographic Transition-2 and an arc-perpendicular Bouguer gravity anomaly reflecting a trough on the Indian plate near longitude 77°E. These data suggest that the Main Boundary Thrust merges along strike with the ramp or with an emergent fault soling into the Main Himalayan Thrust at this location, potentially marking a significant change in tectonic configuration along the Himalayan arc. / Graduate
|
2 |
Measurements versus Predictions for a Hybrid (Hydrostatic plus Hydrodynamic Thrust Bearing for a Range of Orifice DiametersEsser, Paul R. 2010 May 1900 (has links)
A fixed geometry hybrid thrust bearing is investigated with three different supply
orifice diameters. The test rig uses a face-to-face thrust bearing design, with the test
bearing acting as the rotor loading mechanism. A hydraulic shaker applies the static
axial load, which is reacted by a second thrust bearing. The rotor is supported radially
by two water-lubricated fluid film journal bearings and is attached to a 30,600 rpm
motor via a high speed coupling with very low axial stiffness. Thrust bearings with
three different orifice diameters (1.63, 1.80, and 1.93 mm) are tested for a range of
supply pressures, fluid film thicknesses, and rotational speeds. The water-lubricated test
bearings have eight pockets, with feed orifices located centrally in each pocket.
Experimental results are comparted to predictions found using bulk flow model
HYDROTHRUST.
Analysis of the data reveals generally good agreements between predictions and
measurements. Thrust-bearing inlet supply and inner radius flow rates all decreased
with decreasing orifice diameters and bearing axial clearances. In most cases, the
bearings with larger orifice diameters exhibit higher recess pressure ratios, operating clearances, and flow rates. The largest orifice diameter configuration does not display
higher recess pressure ratios or operating clearances at high speeds for some supply
pressures, but it does continue to require additional lubricant flow rate compared to the
smaller orifice bearings. In these cases, the results are not reflected in predictions, which
otherwise correlate very well with experimental measurements. Estimations of static
loading axial stiffness are obtained using experimental results.
An optimum hybrid thrust bearing orifice diameter will depend on the conditions
of individual applications. Larger orifices generally provide larger operating clearances
and higher stiffnesses, but also require higher flow rates. For most applications, a
compromise of bearing performance parameters will be desired. The test results and
comparisons presented will aid in sizing orifice diameters for future hybrid thrust
bearing designs.
|
3 |
INTERACTIONS BETWEEN STRUCTURES IN THE APPALACHIAN AND OUACHITA FORELAND BENEATH THE GULF COASTAL PLAINSurles, Donald Matthew 01 January 2007 (has links)
In Alabama, the Paleozoic Appalachian thrust belt plunges southwest beneath the Mesozoic-Cenozoic Gulf Coastal Plain. In Arkansas, the Paleozoic Ouachita thrust belt plunges southeast beneath the Coastal Plain. The strikes of the exposed thrust belts suggest an intersection beneath the Coastal Plain. Well data and seismic reflection profiles confirm the strike and intersection of the thrust belts, and provide information to determine the structure and general stratigraphy of each thrust belt. In east-central Mississippi, the Appalachian thrust belt curves from the regional northeast trace to westward at the intersection with the southeastern terminus of the Ouachita thrust belt, to northwest where Ouachita thrust sheets are in the Appalachian footwall, and farther west, to a west-southwest orientation. At the intersection, the frontal Appalachian fault truncates the Appalachian thrust sheets. The Appalachian thrust sheets are detached in Lower Cambrian strata and contain a distinctive Cambrian-Ordovician passive-margin carbonate succession. The Ouachita thrust sheets are detached above the carbonate succession and contain a thick Carboniferous clastic succession. The Appalachian thrust sheets east of the intersection rest on an autochthonous footwall with a thin Lower Cambrian sedimentary cover above Precambrian crystalline basement. To the west, the Appalachian thrust sheets rest on an allochthonous footwall of thick Ouachita thrust sheets. The top of Precambrian crystalline basement rocks dips southwestward beneath the Ouachita thrust belt; large-magnitude down-to-southwest basement faults enhance the deepening. Appalachian thrust sheets on the northeast are detached above relatively shallow basement, but to the west, are detached above thick Ouachita thrust sheets, which overlie deeper basement. The structure of the basement reflects the Iapetan rifted margin, where the northwest-striking Alabama-Oklahoma transform bounds the southwest side of the Alabama promontory. The trends of basement structures and subsidence toward the Ouachita thrust belt parallel the Alabama-Oklahoma transform. Shallower basement and synrift basement grabens underlie the northeast-striking Appalachian thrust belt. The curves in strike and along-strike change in footwall structure of the Appalachian thrust belt reflect controls by basement structure and by the structure of the Ouachita thrust belt.
|
4 |
An investigation of new concepts in two-dimensional curved thrust augmentorsEl-Banna, R. A. M. January 1986 (has links)
No description available.
|
5 |
Thrust vectoring experiments with gas injectionSekhon, Kalwant Singh, 1938- January 1964 (has links)
No description available.
|
6 |
Structural geometry, tectonic history and deformation mechanisms in the Moine thrust zone near Ullapool N.W. ScotlandWinter, D. A. January 1984 (has links)
No description available.
|
7 |
Interaction of thrust vectoring jets with wing vortical flowsJiang, Ping January 2009 (has links)
It has been widely anticipated that thrust vectoring could be an effective method of providing sufficient levels of stability and control for highly manoeuvrable and flexible Unmanned Combat Air Vehicles (UCAVs). The present project aims to understand the interactions of delta wing vortical flows and thrust vectoring, with an emphasis on unsteady aspects. Food-colouring dye flow visualization, Laser-induced fluorescent flow visualization, Particle Image Velocimetry (PIV) and force measurements were conducted in the water and wind tunnels over a range of dimensionless frequencies and jet momentum coefficients. Both slender and nonslender wings were tested with the purpose of understanding the effect of sweep angle on the aerodynamics-propulsion interaction. The interaction of statically pitched trailing-edge jets with leading-edge vortices over stationary delta wings was studied. It was found that under-vortex blowing with rectangular nozzle at stall and post-stall regimes could yield the maximum effectiveness of trailing-edge blowing, due to the promotion of earlier reattachment and delay of vortex breakdown. The effect of nozzle geometry can be important, because the entrainment effect of the jet depends on it. Studies of the flow field reveal strong jet-vortex interactions, distortion of jet vortices, and merging of wing and jet vortices. The dynamic responses of wing vortical flows to dynamic trailing-edge blowing exhibit hysteresis and phase lag, which increases with the increasing dimensionless frequency of jet momentum. Time delay for the decelerating jet is significantly larger than that for the accelerating jet. Sweep angle has no significant influence on the effect of unsteady trailing-edge blowing. From a design aspect, hysteresis and time delay need to be considered for the flight control systems.
|
8 |
Orthodontic and biological considerations of deglutition, oro-linguo-facial muscle function, and tongue thrust : diagnosisKift, Russell J January 1985 (has links)
Master of Dental Surgery / This work was digitised and made available on open access by the University of Sydney, Faculty of Dentistry and Sydney eScholarship . It may only be used for the purposes of research and study. Where possible, the Faculty will try to notify the author of this work. If you have any inquiries or issues regarding this work being made available please contact the Sydney eScholarship Repository Coordinator - ses@library.usyd.edu.au
|
9 |
Test-Theory Correlation Study for an Ultra High Temperature Thrust Magnetic BearingDesireddy, Vijesh R. 14 January 2010 (has links)
Magnetic bearings have been researched by the National Aeronautics and Space
Administration (NASA) for a very long time to be used in wide applications. This
research was to assemble and test an axial thrust electromagnetic bearing, which can
handle 1000 lb-f of axial thrust load, when rotating at high speed, in a high temperature
environment of 1000 0F. This high temperature magnetic bearing system would be used
in high performance, high speed and high temperature applications like space vehicles,
jet engines and deep sea equipment.
An experimental procedure was developed to measure actual load capacity of the
designed bearing in the test rig. All the results obtained from the experiment were
compiled and analyzed to determine the relation between bearing force, applied current
and temperature.
The thesis incorporates the assembly, testing of the electromagnetic bearing at
various speeds and temperatures and compare predicted to measured force vs. speed,
current, gap and temperature. The results showed that the high temperature thrust
magnetic bearing is capable of handling 1000 lb-f at 10000F and 5500 rpm.
|
10 |
Orthodontic and biological considerations of deglutition, oro-linguo-facial muscle function, and tongue thrust : diagnosisKift, Russell J January 1985 (has links)
Master of Dental Surgery / This work was digitised and made available on open access by the University of Sydney, Faculty of Dentistry and Sydney eScholarship . It may only be used for the purposes of research and study. Where possible, the Faculty will try to notify the author of this work. If you have any inquiries or issues regarding this work being made available please contact the Sydney eScholarship Repository Coordinator - ses@library.usyd.edu.au
|
Page generated in 0.0404 seconds