No description available.

Ferroelectric materials, especially the polycrystalline ceramics, are very promising material for a variety of applications such as high permittivity dielectrics, ferroelectric memories, piezoelectric sensors, piezoelectric/electrostrictive transducers, electrooptic devices and PTC thermistors. Among the ferroelectric based piezoelectric ceramics the lead–zirconate-titanate Pb(Zr1-xTix)O3 (PZT) have dominated transducer and actuator market due to its excellent piezoelectric and dielectric properties, high electromechanical coupling, large piezoelectric anisotropy, ease of processing and low cost. However, the toxicity of lead based compounds has raised serious environmental concerns and therefore has compelled the researchers to look for new lead free alternatives with good piezoelectric and ferroelectric properties. (Na0.5Bi0.5)TiO3 (NBT) and its solid solution is one of the leading lead free piezoceramic ceramics due to their interesting ferroelectric, piezoelectric, electromechanical and dielectric property. The parent compound NBT is a ferroelectric with a moderately high Curie temperature (~250 oC), large ferroelectric polarization (~40µC/cm2) polarization, promising piezoelectric properties with 0.08% strain and longitudinal piezoelectric coefficient (d33) ~ 80 pC/N. X-ray and neutron diffraction studies in the past have shown that NBT exhibits rhombohedral (R3c) at room temperature. Neutron diffraction studies have suggested that NBT undergo a gradual rhombohedral to tetragonal (P4bm) transformation in a temperature region 200-320 ºC. Though the structure and phase transition behavior of NBT has been extensively investigated for over six decades now, this subject has again become debatable in recent few years, with some group reporting formation of orthorhombic phase above room temperature and another group suggesting monoclinic distortion at room temperature using high resolution x-ray diffraction technique. Interestingly the intermediate orthorhombic instability, reported by electron diffraction studies, has never been captured by neutron diffraction method though neutron diffraction is an equally powerful tool for studying (oxygen) octahedral tilts in perovskites. Needless to mention, the understanding of the subtle structural distortions have great significance with regard to the determination of the structure-piezoelectric property correlations in NBT based piezoceramics. The present thesis deals with such subtle structural issues in great detail. The systems investigated in the thesis are Ca and Ba modified NBT. While the Ca modified system was chosen to understand the subtle orthorhombic instability that has been reported above room temperature (only) by detailed electron diffraction work, Ba-modified NBT is the most investigated among the NBT-derived piezoelectric material systems and this thesis attempts to address some of the very complex nature of the structure-piezoelectric property correlation of this system. The first chapter of the thesis provides a brief introduction to the field of ferroelectrics, perovskite structure and their phase transition. A brief exposure to the conventional lead based relaxor ferroelectric and piezoelectric material is provided. A detailed overview of the existing knowledge related to room temperature structure of NBT and its phase transition studies with temperature has been discussed in the later part of this chapter. The second chapter includes various the experimental techniques that have been employed to synthesis and characterize the specimens under investigation. The third chapter deals with the phase transition behaviour of Ca modified NBT as a function of composition and temperature in the dilute concentration region. This work was carried out with the view to obtain a better understanding and compliment the intrinsic high temperature orthorhombic instability in NBT reported by electron diffraction technique. Interestingly, inspite of the fact that neutron diffraction method is a very sensitive tool for investigating subtle change in the nature of octahedral tilt in oxide perovskites, the intermediate orthorhombic distortion proposed by the electron diffraction studies has so far never been captured in any of the neutron diffraction studies. In this work we have verified the genuineness of the intrinsic instability with regard to the non-polar orthorhombic structure using neutron powder diffraction by adopting a special strategy which helped in capturing the characteristic signatures (the superlattice reflections) of the orthorhombic phase in the neutron powder diffraction patterns. It was found that small fraction of Ca-substitution (8-10 mol %) was good enough to amplify the magnitude of the orthorhombic (Pbnm) distortion, without altering the sequence of the structural evolution with temperature of the parent compound (NBT) itself, and stabilizing it at the global length scale at lower temperatures than pure NBT. This chapter presents the innovative approach that was used to extract reliable information about the very complex phase transition behaviour, involving coexistence of the various similar looking but crystallographically different phases in different temperature regimes by Rietveld analysis of temperature dependent neutron powder diffraction pattern in conjunction with temperature dependent dielectric and ferroelectric characterization of the specimens. The detailed study revealed the following sequence of structural evolution with temperature: Cc+Pbnm →Pbnm + P4/mbm → P4/mbm →Pm3 m. The fourth chapter gives a detail account of the structure-property correlations and the phase transition behaviour of (1-x)(Na0.5Bi0.5)TiO3 – (x)BaTiO3 (0≤x≤0.10), the most important solid solution series with NBT as reported in the literature. The phase transformation behaviour of this system has been investigated as a function of composition (0<x≤0.10), temperature, electric field and mechanical-impact by Raman scattering, ferroelectric, piezoelectric measurements, x-ray and neutron powder diffraction methods. The structure of the morphotropic phase boundary (MPB) compositions of this system, which is interesting from the piezoelectric property point of view, has been under controversy for long. While some groups report the structure to be pseudocubic, other groups suggest it to be combination of rhombohedral and tetragonal. A perusal of the literature suggests that the reported nature and composition range of MPB is dependent on the method of synthesis and characterization technique used. In the present study, crystal structure of the NBT-BT solid solution has been investigated at the close interval near the MPB (0.05≤x≤0.10). Though x-ray diffraction study revealed three distinct composition ranges characterizing different structural features in the equilibrium state at room temperature: (i) monoclinic (Cc) + rhombohedral (R3c) for 0≤x≤0.05, (ii) “cubic-like” for 0.06≤x≤0.0675 and (iii) MPB like for 0.07≤x<0.10, Raman and neutron powder diffraction studies revealed identical symmetry for the cubic like and the MPB compositions. Both the cubic like compositions and the MPB compositions exhibit comparatively large d33. In the later part of this chapter this apparent contradiction is resolved by the fact that the cubic like structure transforms irreversibly to MPB after electric poling, a procedure which involves applying high dc electric field (well above the coercive field) to the pellet before carrying out the piezoelectric measurements. The effect of electrical field and mechanical impact has been studied for all the three different composition range, and it was found that electric field and mechanical impact both led to irreversible phase transformation in the same direction, though the transformation with mechanical impact remains incomplete in comparison to electric field. The most pronounced effect was observed for the cubic like compositions 0.06≤x≤0.0675 – they undergo phase separation to rhombohedral and tetragonal phases by electrical and mechanical perturbations. In the non-perturbed state the cubic-like critical compositions mimics features of relaxor ferroelectrics and extremely short coherence length (~ 40-50 Å) of the out-of-phase octahedral tilts. In the poled state this coherence length grows considerably and the system behaves like a normal ferroelectric. This confirmed a strong coupling between the lattice, octahedral tilts and polarization degrees of freedom. Neutron diffraction study of compositions exhibiting cubic-like and the MPB like revealed that the traditional P4bm tetragonal structure model fails to account for the intensity of the superlattice reflections. Thus the tetragonal structure stabilized above room temperature in pure NBT is different from the tetragonal phase observed at room temperature in the NBT-BT system. The results of the effect of mechanical impact and electric field has also been reported in this chapter for the critical composition exhibiting MPB (x=0.07). A detailed structural analysis of the precritical compositions, x≤0.05, revealed coexistence of ferroelectric phases (Cc+R3c) in equilibrium state (annealed specimens). This transforms to single phase (R3c) state after poling. Thus though the precritical (x≤0.05) and critical compositions (0.06≤x<0.10) of NBT-BT exhibits coexistence of ferroelectric phases in the equilibrium state, the fact that the electric poling makes the specimen single phase, R3c, after poling for the precritical compositions and retains the two phase nature of the critical compositions makes the critical compositions exhibit considerably higher piezoelectric response than the precritical compositions. Chapter five is dedicated to phase transition behaviour of the post critical compositions of (1-x)(Na0.5Bi0.5)TiO3–(x)BaTiO3 (0.16≤x≤1) using temperature dependent XRD, dielectric and ferroelectric studies. Though structurally the entire composition range is tetragonal, several notable features were revealed during detailed examination of the structural and dielectric behaviour. This study is also important from the view point that pure BT is a major component of multilayer ceramic capacitors and that an increase in the Curie point would be a welcome step for better temperature stability of the device. NBT does this. The transition temperature increases from 120 ºC for pure BT to 275 ºC for x=0.30 along with simultaneous increase in c/a ratio from 1.009 (pure BT) to 1.02 (x=0.30). Detailed analysis of temperature and frequency dependent dielectric data revealed deviation from Curie-Weiss and suggests a gradual transformation to relaxor-ferroelectric state as the NBT concentration increases in BT. The measure of frequency dispersion ‘γ’ parameter was determined from modified Curie-Weiss law for various compositions in the system. The ferroelectric and piezoelectric properties have also been investigated in detail for this composition range and an attempt has been made to correlate the composition variation of these properties with their structural parameters. This chapter shows a systematic correlation between all physical quantities such as Curie point, piezoelectric coefficient, polarization and tetragonality as a function of composition.

Ferroelectric ceramics are very promising materials for a variety of piezoelectric applications such as high permittivity dielectrics, piezoelectric sensors, piezoelectric/electrostrictive transducers, actuators, electro-optic devices, etc. Among the commercially viable ferroelectric ceramics, the lead-zircon ate-titivate Pb(Zr1-xTix)O3 (PZT) based ceramics have dominated the market due to their superior piezoelectric and dielectric property along with other advantages like high electromechanical coupling, ease of processing and low cost. However, the toxicity of lead based materials, and its volatility at processing temperatures is a serious health and environmental concern. Several legislations against lead-based products have been passed all over the world in order to encourage identification of alternative lead-free materials for these applications. As a consequence, there has been a remarkable surge in efforts by researchers on identifying lead-free alternatives for piezoelectric applications. A larger emphasis has been placed on perovskite based ceramics since in addition to possessing excellent properties, their relatively simple structure facilitates understanding structure-property relationships which are important for developing novel high performance materials. Na1/2Bi1/2TiO3 (NBT) and its solid solutions are one of the leading classes of perovskite ceramics, which show promising ferroelectric, piezoelectric and dielectric property thereby having the potential to replace PZT based ferroelectrics. The parent compound NBT is ferroelectric with large ferroelectric polarization (~40 C/cm2), promising piezoelectric properties with 0.08% maximum strain and longitudinal piezoelectric coefficient (d33) ~ 80 pC/N. Though NBT was discovered nearly six decades ago, a clear understanding of its structure remained elusive for a long time since different characterization techniques yielded contradicting reports on its structure and nature of phase transformation. However, rapid advances in characterization techniques in recent years have led to uncovering of new results, thereby shedding light on the true structure of NBT. X-ray and neutron diffraction studies in the past have shown that NBT exhibits rhombohedral (R3c) structure at room temperature, which undergoes a gradual transformation into tetragonal (P4bm) structure at ~230oC. However, recent characterization of both single crystal and powder of NBT using high resolution x-ray diffraction showed that the room temperature structure is not purely rhombohedral and the structure can be better modeled with a monoclinic (Cc) structure. In contrast to x-ray and neutron diffraction, electron diffraction studies have shown evidence for the presence of planar disorders, corresponding to in-phase octahedral tilts in the sample which cannot be accounted for by either R3c or Cc structure. In addition, EXAFS, x-ray and neutron total scattering studies, diffuse scattering studies, etc. have shown that the structural parameters obtained from bulk diffraction techniques are significantly different from the local structure of the material. Similar ambiguities have been observed even in NBT based solid solutions like BaTiO3, K1/2Bi1/2TiO3, etc. which show enhanced properties at the morphotropic phase boundary (MPB). A major breakthrough in understanding the structural complexity involved in NBT based solid solutions was achieved when it was found that the structure of the MPB compositions were sensitive to electric field. This led to solving the mystery behind the appearance of cubic-like phase at some of the MPB compositions where the application of electric-field resulted in the transformation of the structure into a co-existence of rhombohedral and tetragonal phases. Observation of an electric-field-induced structural transition at the MPB compositions was expected, because the MPB signifies instability in the system and even a minor external force can significantly influence the system. However, we have found that the structure of even pure NBT is significantly influenced by electric field and the framework of this thesis is based on this particularly important result. The intrinsic tendency of the electric field to affect the structure of NBT is a major factor which needs to be considered when studying similar phase transitions in the MPB compositions of NBT-substituted systems also. This was not taken into account by other research groups, and they assumed that the instability associated with the MPB was the only major factor involved in the electric-field induced transitions. A simple but highly effective strategy of grinding the electrically poled pellet into fine powder and then collecting x-ray diffraction patterns, facilitated elimination of preferred orientation in the sample. Thus, structural analysis by Rietveld refinement was possible even on the poled sample, which has not been carried out by any other groups on any ferroelectric ceramics so far. The initial part of the thesis deals with addressing the structural complexity of pure NBT, wherein the effect of electric field on the bulk structure as well as the local structure was studied in great detail. Later on, similar concepts are used to investigate BaTiO3 and K1/2Bi1/2TiO3 substituted NBT also. The first chapter of the thesis provides a brief introduction to the field of ferroelectrics, perovskite structure and their phase transition. An exposure to concepts like relaxor ferroelectrics, morphotrophic phase boundary, octahedral tilting, etc. has been provided. Then, a detailed overview of the existing literature related to the structure of NBT and its phase transition studies with temperature has been discussed. The details of the experimental procedures, characterization techniques used, and some theory behind these techniques have been provided in chapter 2. The third chapter deals with the room temperature structural characterization of pure NBT using techniques like x-ray diffraction, neutron diffraction, electron diffraction and EXAFS analysis. The results of these structural characterizations are also complemented with first-principles calculation study of the ground state structure of NBT, dielectric and ferroelectric characterization, and ageing studies. While x-ray and neutron diffraction clearly established electric-field induced structural transition from a monoclinic (Cc) to rhombohedral (R3c) structural transition, first principles calculation showed that the monoclinic phase is not stable and hence cannot be the ground state structure of NBT. Also, the possibility of the monoclinic features appearing in the x-ray diffraction solely due to micro structural effects by nano-sized domains was discussed. Comparison of electron diffraction of poled and unpoled samples of NBT showed that the in-phase tilted regions were greatly suppressed in the poled samples. Even HRTEM images showed that the unpoled samples had a very high concentration of strain heterogeneity in them, which was absent in the poled samples. This gave a direct evidence of correlation between observation of monoclinic phase and the presence of in-phase tilted regions in the unpoled samples. It was proposed that the strain caused by these in-phase tilted disorders caused distortion in the original rhombohedral lattice thereby making the structure appear monoclinic. Application of electric field causes the in-phase octahedral tilt disorders to vanish, thereby even the monoclinic features observed in the XRD also disappear. The fourth chapter discusses the consequences of poling on the high temperature phase transition behavior of NBT. We have used temperature dependent x-ray and neutron diffraction, Raman spectroscopy and EXAFS analysis whose results were correlated with the anomalies observed in temperature dependent dielectric and polarization studies. We found that the poled sample shows a sharp anomaly at the depolarization temperature (Td) in all the characterization techniques used, in contrast to a diffuse or negligible effect seen in the unpoled sample. The depolarization temperature was found to be associated with introduction of structural disorder in the sample in the form of in-phase octahedral tilts. This also gave rise to a normal to relaxor ferroelectric transition at Td, and this relaxor behavior persisted even after cooling the sample to room temperature. An intermediate cubiclike phase was observed from x-ray diffraction at around 300C wherein the rhombohedral phase vanishes and the tetragonal phase begins to appear. Even single crystal study of NBT in the past showed sudden disappearance of the domains at 300C, even though they were visible at both above and below this temperature. This effect was called isotropization, and was postulated to arise due to extremely small domains which made the system isotropic. However, our neutron diffraction pattern showed that in-phase tilted superlattice reflections persisted at this temperature which meant that the structure was not truly cubic at this temperature. Further, a neutron diffraction study at higher temperatures showed that the in-phase tilted superlattice reflections persisted even above the cubic phase transition temperature, in corroboration with similar reports from high temperature electron diffraction. Chapter five deals with the BaTiO3 substituted NBT system, which has gained tremendous interest in the last decade as a viable piezoelectric ceramic for commercial applications. Though a large number of groups have already carried out exhaustive studies on this system, most of the work concentrated mainly on the MPB compositions which showed enhanced piezoelectric properties. In this chapter, we highlight some important findings in the pre-MPB and post-MPB compositions. Using room-temperature and high temperature x-ray diffraction, we show that there exists a subtle compositional phase boundary at x = 0.03, which disappears upon poling the sample. While the monoclinic phase in pure NBT becomes cubiclike at this composition, the depolarization temperature (Td) also slightly increases up to this composition and then decreases upon further Ba substitution. Similar studies were also carried out with compositions containing slightly excess bismuth in them (0.1 mol %), whose purpose was to negate the effects of Bi-vaporization during sintering. It was found that while the compositional phase boundary remained essentially unchanged, there was a decrease in Td for all the compositions. It was also realized that the addition of excess bismuth improved the overall piezoelectric property of the system. Studies on higher compositions of Ba in the post-MPB regions further revealed two additional compositional phase boundaries. A criticality in the coercive field and spontaneous tetragonal strain was observed at x = 0.2, which was found to be associated with crossover from a long-period modulated tetragonal phase (for x < 0.2) to a no modulated tetragonal phase (for x > 0.2). Near the BT rich end (x ~ 0.7), the system exhibits a crossover from normal to a diffuse/relaxor ferroelectric transition with increasing Na1/2Bi1/2 substitution. The onset of relaxor state by Na1/2Bi1/2 substitution on the Ba-site, was shown to increase the spontaneous tetragonal strain in the system. This was because of the enhancement in the covalent character of the A-O bond by virtue of the Bi+3 6s2 lone pair effect, and it also led to a sudden increase in the tetragonal-to-cubic transition temperature. This was in contrast to other chemical modifications of BT reported in the past (like Zr, Sn, Sr, etc.) where the relaxor state is accompanied by a weakening of the ferroelectric distortion and a decrease in the critical temperature. Finally, chapter six covers the effect of electric field induced phase transition in K1/2Bi1/2TiO3 substituted NBT. Visual observation showed that while the compositions (x < 0.2) behaved similar to pure NBT, wherein the structure became purely rhombohedral upon poling, the effect of electric field was negligible in the post-MPB compositions (x > 0.2). In addition, the peaks in the annealed samples were considerably overlapping which made identifying the structural transitions at the MPB compositions difficult using Rietveld analysis. However, comparison of the FWHM of the {200}pc peaks of compositions x < 0.2 showed that the FWHM began to increase suddenly for x > 0.15 indicating emergence of the tetragonal phase. Also, all the compositions showed an increase in the {200}pc peak FWHM by 0.03 after poling. The depolarization temperature showed only slight variation in the pre-MPB compositions, but showed a minimum at the MPB compositions. Temperature dependent dielectric studies further showed that for the post-MPB compositions, the system remains relaxor even after poling.

Transition metal oxides and chalcogenides are an ideal platform for demonstrating and investigating many interesting electronic phases of matter. These phases emerge as a result of collective many body interactions among the electrons. The omnipresent electron, depending on its interaction with other electrons and with the underlying lattice, can generate diverse phases of matter with exotic physical properties. The ultimate objective of Materials Science is to provide a complete microscopic understanding of these myriad electronic phases of matter. A proper understanding of the collective quant-tum behaviour of electrons in different system can also help in designing and tuning new electronic phases of matter that may have strong impact in the field of microelectronics, well beyond that predicted by Moore s law. Strong electron correlation effects produce a wide spectrum of ground state prop-retires like superconductivity, Metal Insulator Transition (MIT), charge-orbital ordering and many more. Similarly, different spin interactions among electrons, essentially due to various kinds of exchange coupling, give rise to varying magnetic ground state prop-retires like ferromagnetism, anti-ferromagnetism, spin glass, among others. The main objective of this thesis is to understand and rationalize diverse electronic and magnetic phases of matter in some selected strongly correlated systems. In chapter 1 we have provided an overview of various electronic and magnetic phases of matter which are relevant and necessary for understanding the chapters that follow. The first part of this chapter describes the fundamental concepts of the so called Metal Insulator Transition (MIT). A small section is dedicated to the subtle interactions among electrons and lattice that actually drive a system from a highly conducting metallic state to a strongly resistive insulating state. The second part of this chapter offers a compilation of different magnetic ground states which are discussed in detail in the last two chapters. In Chapter 2, we have explained various methodologies and experimental tech-antiques that have been used in the work reported in this thesis. In Chapter 3, we have provided a detailed understanding of the MIT in different polymorphic forms of Vanadium dioxide (VO2). Although VO2 exhibits a number of polymorphic forms, only the rutile/monoclinic VO2 phase has been studied extensively compared to other polymorphic forms. This phase shows a well-established MIT across ∼340 K, which has been extensively investigated in order to understand the relative importance of many body electron correlation effects arising primarily from on-site Coulomb interactions within the Vanadium 3d manifold, and single electron effects flounced by the dimerization of Vanadium atoms. Unlike the rutile phase of VO2, little is known about the MIT appearing across 212 K in the metastable B-phase of VO2. This phase shows dimerization of only half of the Vanadium atoms in the insulating state, in contrast to rutile/monoclinic VO2, which show complete dimerization. There is a long standing debate about the origin of the MIT in the rutile/monoclinic phase, that contrasts the role of the many-body Hubbard U term, with single particle effects of the dimerization. In light of this debate, the MIT in the B-phase offers a unique opportunity to understand and address the competition between many body and single particle effects, that has been unresolved over several decades. In this chapter we have investigated different polymorphs of VO2 to understand the underlying electronic structure and the nature of the MIT in these polymorphic forms. The MIT in VO2 B phase is very broad in nature. X-ray photoemission and optical conductivity data indicate that in case of VO2 B phase both correlation effects and dimerization is necessary to drive the MIT. We have also established that the correlation effects are more prominent for VO2 B phase compared to rutile/monoclinic phase. In Chapter 4, we have discussed the electronic structure of LaTiO3 (LTO)-SrTiO3 (STO) system. At the interface between polar LTO and non-polar (STO) oxides, an unique two dimensional electron gas (2DEG) like state appears, that exhibits a phenomenal range of unexpected transport, magnetic, and electronic properties. Thus, this interface stands as a prospective candidate for not only fundamental scientific investigation, but also application in technological and ultimately commercial frontiers. In this chapter, using variable energy Hard X-ray photoemission spectroscopy (HAXPES), we have experimentally investigated the layer resolved evolution of electronic structure across the interface in LTO-STO system. HAXPES results suggest that the interface is more coherent in nature and the coherent to incoherent feature ratio changes significantly as we probe deeper into the layer In chapter 5, we have investigated the electronic structure of the chemically exfoliated trigonal phase of MoS2. This elusive trigonal phase exists only as small patches on chemically exfoliated MoS2, and is believed to control functioning of MoS2 based devices. Its electronic structure is little understood, with total absence of any spec-troscopic data, and contradictory claims from theoretical investigations. We have ad-dressed this issue experimentally by studying the electronic structure of few layered chemically exfoliated MoS2 systems using spatially resolved X-ray photoemission spec-otoscopy and micro Raman spectroscopy in conjunction with electronic structure calculations. We have established that the ground state of this unique trigonal phase is actually a small gap (∼90 meV) semiconductor. This is in contrast with most of the claims in existing literature. In chapter 6, we have re-examined and revaluated the electronic structure of the late 3d transition metal monoxides (NiO, FeO, and CoO) using a combination of HAX-PES and state-of-the-art theoretical calculations. We have observed a strong evolution in the valence band spectra as a function of excitation energy. Theoretical results show that a combined GW+LDA+DMFT scheme is essential for explaining the observed experimental findings. Additionally, variable temperature HAXPES measurement In chapter 8, we have differentiated the surface and the bulk electronic structure in Sr2FeMoO6 and also have provided a new route to increase the Curie temperature of this material. Sr2FeMoO6 is well known for its high Curie temperature (Tc ∼410 K), half-metallic ferromagnetism, and a spectacularly large tunnelling magnetoresistance. The surface electronic structure of Sr2FeMoO6 is believed to be different from the bulk; leading to a Spin-Valve type Magnetoresistance. We have carried out variable energy HAXPES on Sr2FeMoO6 to probe electronic structure as a function of surface depth. Our experimental results indicate that surface is more Mo6+ rich. We have also demonstrated what we believe is the first direct experimental evidence of hard ferro-magnetism in the surface layer using X Ray Magnetic Circular Dichroism (XMCD) with dual detection mode. In the second part of this chapter we have designed a new route to increase the Curie temperature and have been successfully able to achieve a Curie temperature as high as 515 K.