Výpočetní tomografie je nástroj pro nedestruktivní inspekci vzorků, který je běžně používán v mnoha oblastech průmyslu a výzkumu. Některé tomografické přístroje umožňují snímání obrazů s prostorovým rozlišením pod jeden mikrometr. Zorné pole takovýchto přístrojů bývá malé, v rozsahu jednotek milimetrů či méně. Tím jsou omezeny rozměry vzorků, což je značně limitující. Toto omezení lze překonat pomocí různých technik pro rozšíření zorného pole. Jedna takováto dříve publikovaná metoda byla v této práci upravena a implementována pro přístroj Rigaku Nano3DX. Tato technika téměř zdvojnásobuje zorné pole přístroje bez nutnosti většího detektoru. Implementovaný přístup byl testován pomocí umělých i skutečných dat, a jeho účinnost byla zhodnocena subjektivně i objektivně, pomocí vizuální kontroly a metrik kvality obrazu. Hodnocení je převážně založeno na srovnání obrazů rekonstruovaných pomocí této metody s obrazy získanými pomocí většího detektoru. Implementovaná technika rozšíření zorného pole poskytuje věrné rekonstrukce vzorku, srovnatelné se zmíněnými protějšky.

The study deals with the image reconstructions using the ultrasound propagation speed measuring and it extends the project of the ultrasound transmission tomography organised in cooperation with the research centre Forschungszentrum Karlsruhe (Germany). There were data processed which had been gained with the 3D ultrasound transmission tomography system (3D USCT). The ultrasound propagation speed was measured using the detection of ultrasound ray travelling time from a transmitter to a receiver. There were three new algorithms developed for the detection of an ultrasound impulse and the software generating suitable testing data. The developed algorithms were consequently tried with these data and, then, included into the existing software. All software was developed within the Matlab programming environment.

The first part of the Master´s thesis describes physical principles of ultrasound and fundamental variables of ultrasound field. It also deals with mathematical description of finite element method and outlines basic principles of ultrasound computed tomography. The second part introduces finite elements generator GMSH. This part focuses on the process of ultrasound field simulation and presents software that can be used for field simulation. The last part contains examples of models.

Semester project deals with the processing of data from TEM and their analysis (to- mography, single particle analysis). The main aim of this work is to determine the 3D structure of the studied enzyme. As a test sample with low symmetry is used restriction endonuclease EcoR124I.

The area of clinical biomechanics is a rapidly growing engineering discipline in the world of today. This master's thesis is concerned with the stress-strain analysis of human femoral neck. In the first place it emphasizes the creation of computational model, especially the model of bone material, because of its high level of inhomogeneity. The creation of the computational model has been tested using several software packages, which are often mentioned in connection with the biomechanical tasks. The latter part of the thesis contains finite element method analysis for several material models, which are based on extensive analysis of relations used to transfer the information from computed tomography data to material model properties. Subsequently, the realization of experimental measurement is described. The final part of the thesis contains evaluated results obtained from the FEM analysis, which are also compared with the experiment.

Purpose: The aim of the first part of this work was to evaluate the trend of the number of head CT examinations in patients with minor head injury in emergency service and to find out whether it has objective causes. The aim of the second part was to assess patients' knowledge regarding the CT examination, its risks, the source of their information and to evaluate the effect of providing information about the CT examination in a printed form. Method: In the first part of the work, we extracted data from the radiological module of the hospital information system. We searched for head CT scans in patients with minor head injury and their input characteristics and findings on CT. Further data were obtained from the hospital, the Institute of Health Information and Statistics and the Czech Statistical Office. Trends of regression curves were compared by F-test, correlation of trends was expressed using Spearman's coefficient. The second part of the work was based on a questionnaire for patients scheduled for CT scan of the body. The questionnaire included demographic data as well as items assessing patients' awareness of the risks of radiation exposure, intravenous contrast media, their sources of information and their fear of the examination. On the second page, Zung's Anxiety Scale was printed. On...

The Větrníky national nature reserve, located in the South Moravian region north of the village of Letonice, is one of the largest steppe reserves in Southern Moravia. This whole area is characterized by the presence of both stable and active landslides, and the occurrence of suffosion sinkholes has been monitored there in the long-term. The aim of the thesis was to investigate whether it was possible to observe subsurface phenomena, caused by the washing out of fine rock particles by ground water, by means of geophysical methods. This phenomenon is known as suffosion. The measurements took place in the areas where the suffosion manifestation was very distinctive, that is around two sinkholes that were visible on the surface. In order to identify the suffosion structural-geological causes and their manifestations at a given location, the gravimetric and electrical resistivity tomography (ERT) methods were used in the first stage of the research. Measured data was further processed and geologically interpreted. The gravimetric method has proved suitable when identifying rocks affected by suffosion, in which case we assume that their density is lower than the density of the surrounding rocks. Using the ERT method, it was possible, in the vertical profile, to distinguish the sandy-gravelly sediments...

AJ Knowledge of the soft facial tissues is the basis of any craniofacial reconstruction. It is of a great importance mainly for forensic practice, but it plays an important role in other fields, for example aesthetic surgery. Defining the thickness of facial tissues for different sexes, age and ethnic groups is an important aspect of forensic anthropology. The thesis specialises in finding out the thickness of soft facial tissues in modern czech population, it takes into consideration the sex, age and assymetry. The main source of information are the CT scans of the heads of 46 adult women and 56 adult men of czech nationality ranging between ages 21 to 83. 80 landmarks are defined in each scan, therefore 40 linear measurements between corresponding points have been evaluated. Data were analysed using the PCA, Hotelling test, linear discrimination analysis, Kolmogorov-Smirnov test, MANOVA, Kruskal-Wallis test and Wilcoxon paired test. Retrieved thicknesses of soft tissues will serve as the standards for the current czech population. Sexual dimorphism has been proven regarding the whole face, as well as both upper and lower parts of the face. The success of classification on the upper part of the face decresases significantly. Aging has been proven to have strong effect on the thickness of soft...

In this study, imaging with ionizing radiation was evaluated as a research technique in coal research. Part of the evaluation was to conduct a thorough literature survey as well as a preliminary investigation into coal pyrolysis and gasification with micro–focus X–ray tomography. The literature survey summarizes previous research experiences, primarily focussing on the possibility of utilizing a specific coal bed for carbon dioxide sequestration and methane production. This includes quantifying the fracture and cleat network and visualizing the orientation of this network. The cleat and fracture spacing and aperture are used to calculate certain parameters necessary to model gas flow. Other aspects include non–destructive characterization which consisted of determining the porosity and the minerals and macerals present and the respective mineral distribution. The literature survey also includes a section on the utilization of neutrons in coal research and a description of a neutron imaging facility in South Africa is presented. Three coal samples from the Waterberg and Highveld regions of South Africa were used to investigate the process of pyrolysis through micro–focus X–ray tomography. The samples swelled significantly when 50% pyrolysis was achieved after which the samples became brittle. This verified the plastic nature of the coal, that is prevalent under these conditions. It was also possible to perform qualitative characterizations prior to and during the process. Regions of low and high density materials could also be visualized. The distribution of the minerals is indicative of the permeability of the organic matrix. Two coal samples of the Highveld regions were used to investigate gasification up to a level of 30%. It was possible to verify that the reaction progressed according to the mechanisms proposed by the un–reacted shrinking core model. The mineral matter and the high density coal macerals did not influence the reaction in any way. / http://hdl.handle.net//10394/7008 / Thesis (M.Ing. (Chemical Engineering))--North-West University, Potchefstroom Campus, 2012.

In this study, imaging with ionizing radiation was evaluated as a research technique in coal research. Part of the evaluation was to conduct a thorough literature survey as well as a preliminary investigation into coal pyrolysis and gasification with micro–focus X–ray tomography. The literature survey summarizes previous research experiences, primarily focussing on the possibility of utilizing a specific coal bed for carbon dioxide sequestration and methane production. This includes quantifying the fracture and cleat network and visualizing the orientation of this network. The cleat and fracture spacing and aperture are used to calculate certain parameters necessary to model gas flow. Other aspects include non–destructive characterization which consisted of determining the porosity and the minerals and macerals present and the respective mineral distribution. The literature survey also includes a section on the utilization of neutrons in coal research and a description of a neutron imaging facility in South Africa is presented. Three coal samples from the Waterberg and Highveld regions of South Africa were used to investigate the process of pyrolysis through micro–focus X–ray tomography. The samples swelled significantly when 50% pyrolysis was achieved after which the samples became brittle. This verified the plastic nature of the coal, that is prevalent under these conditions. It was also possible to perform qualitative characterizations prior to and during the process. Regions of low and high density materials could also be visualized. The distribution of the minerals is indicative of the permeability of the organic matrix. Two coal samples of the Highveld regions were used to investigate gasification up to a level of 30%. It was possible to verify that the reaction progressed according to the mechanisms proposed by the un–reacted shrinking core model. The mineral matter and the high density coal macerals did not influence the reaction in any way. / http://hdl.handle.net//10394/7008 / Thesis (M.Ing. (Chemical Engineering))--North-West University, Potchefstroom Campus, 2012.