In a world with a growing population there is a trend toward higher and higher energy usage. Because of the cost involved in producing extra energy, there is a need for more efficient usage of the energy that is already available. The issue of efficiency rings home especially clear with electric motors. Although induction motors are used in many different applications, the motors used in electric vehicles must be able to generate a large starting torque as well as operate over a wide speed range. This work analyzes the restrictions placed on the motor and inverter drive system. It also looks at the best method for controlling the drive in order to achieve the highest efficiency out of the drive. While other works have shown methods of achieve high efficiency out of the motor, it is the assertion of this work that the efficiency of the total drive is more important. It is to that end that this work analyzes the performance of an induction motor under low torque and speed where a traction drive utilizes the most energy. / Master of Science

Recently, permanent magnet assisted (PMa)-synchronous reluctance motors (SynRM) have been considered as a possible alternative motor drive for high performance applications. In order to have an efficient motor drive, performing of three steps in design of the overall drive is not avoidable. These steps are design optimization of the motor, identification of the motor parameter and implementation of an advanced control system to ensure optimum operation. Therefore, this dissertation first deals with the design optimization of the Permanent Magnet Assisted Synchronous Reluctance Motor (PMa-SynRM). Various key points in the rotor design of a low cost PMa-SynRM are introduced and their effects are studied. Finite element approach has been utilized to show the effects of these parameters on the developed average electromagnetic torque and the total d-q inductances. As it can be inferred from the name of the motor, there are some permanent magnets mounted in the rotor core. One of the features considered in the design of this motor is the magnetization of the permanent magnets mounted in the rotor core using the stator windings to reduce the manufacturing cost. At the next step, identification of the motor parameters is discussed. Variation of motor parameters due to temperature and airgap flux has been reported in the literatures. Use of off-line models for estimating the motor parameters is known as a computationally intensive method, especially when the models include the effect of cross saturation. Therefore in practical applications, on-line parameter estimation is favored to achieve a high performance control system. In this dissertation, a simple practical method for parameter estimation of the PMa-SynRM is introduced. Last part of the dissertation presents one advanced control strategy which utilized the introduced parameter estimator. A practical Maximum Torque Per Ampere (MTPA) control scheme along with a simple parameter estimator for PMa-SynRM is introduced. This method is capable of maintaining the MTPA condition and stays robust against the variations of motor parameters. Effectiveness of the motor design procedure and the control strategy is validated by presenting simulation and experimental results of a 1.5 kW prototype PMa-SynRM, designed and manufactured through the introduced design method.

Cette thèse est consacré à l’évaluation et l’amélioration de la performance de la machine synchrone à réluctance variable pour des applications à vitesse variable en général et pour les applications automobiles en particulier. Les deux axes de développement sont la conception de la machine et l’injection des harmoniques de courants de phase. Le rotor est un élément important dans la conception de la machine, et un intérêt particulier est dédié à la conception et l’évaluation du rotor pour améliorer la performance de la machine. Une méthode analytique est proposée dans la thèse pour concevoir le rotor. Plusieurs éléments tels que les ponts qui maintiennent le rotor mécaniquement résistant, ainsi que le rapport d’isolation d’axe q (rapport air-acier) sont étudiés. Une étude de conception assistée par ordinateur basé sur un problème d’optimisation paramétrique est présentée aussi. Les trois familles des algorithmes d’optimisation sont évaluées pour la procédure d’optimisation: un algorithme à base de gradient (algorithme de Newton Quasi), un algorithme non-évolutionnaire sur la base de non-gradient (Nelder Mead Simplex) et un algorithme évolutif sur la base non-gradient (algorithme génétique). Les designs de machines basées sur la procédure analytique et la procédure d’optimisation sont testés sur un banc d’essai. Le deuxième axe d’études de la thèse est l’injection d’harmoniques dans les courants de phase de la machine à réluctance variable synchrone. L’interaction des harmoniques de courant avec les harmoniques spatiales des inductances est étudiée et formalisée pour une machine à m-phases. Ensuite, le concept d’injection d’harmoniques est évalué dans le cas particulier d’une machine à deux phases. Cette étude montre l’avantage de l’injection d’harmoniques dans la réduction de l’ondulation de couple de la machine. Un design d’une machine est finalement développé pour une application automobile sur la base de l’optimisation paramétrique du stator et du rotor. Cette conception est évaluée pour les spécifications imposées électromagnétiques par une application de traction à puissance moyenne / This thesis is dedicated to the evaluation and the improvement of the synchronous reluctance machine’s performance for variable speed drive applications in general and for automotive applications in particular. The two axes of development are machine design and phase current harmonics injection. The rotor is an important element in the machine design and particular emphasis is placed to the design and evaluation of the rotor for enhancing the machine performance. An analytical procedure is proposed for the rotor design. The rotor elements like the ribs and the bridges that maintain the rotor mechanically strong as well as the q-axis insulation ratio (air-to-steel ratio) are studied. A computer-aided design study based on a parametric optimization problem is presented as well. The main three families of the optimization algorithms are evaluated for the optimization procedure: a gradient-based algorithm (Quasi Newton Algorithm), a non-gradient based non-evolutionary algorithm (Nelder Mead Simplex) and a non-gradient based evolutionary algorithm (Genetic Algorithm). The machine designs based on the analytical procedure and the optimization procedure are both manufactured and tested on a bench. The second axis of study of the thesis is the injection of harmonics in the phase currents of the synchronous reluctance machine. The interaction of current harmonics with the spatial inductance harmonics is studied and formalized for an m-phase machine. Then, the harmonics injection concept is evaluated in the particular case of a 2-phase machine. This study shows the benefi t of harmonics injection in the reduction of the machine torque ripple. A synchronous reluctance machine design is fi nally developed for an automotive application based on parametric optimization of the stator and rotor. This design is evaluated for the electromagnetic specifi cations imposed by a mid-power electric vehicle traction application