By entering the diploma thesis is to create an architectural study of the sacral object and the Salesian community center in Brno - Líšeň. The first mention of the creating church appeared in 1987 and because of this reason Salesians came to this city, they focus on working with children and youth, according to Don Bosca. Their method od education was reflected in the overall project concept. The building will be linked to the existing object of the Salesian Youth Center, but it will also serve for a wider circle of believers. The consecration of the church will be a third divine person - the Holy Spirit. The object will be on the Horníková ulica, on the parcels no. 5037/30,32. On the plot with parc. No.5037/32 is currently a building, that is the property of the Nadácia pre radosť, and it will by removed during construction. The proposal is based on urban analyzes performed and responds to the surrounding buildings. It also affects the conditions of the building plot and uses terrain sloping. The proposal consists of one object that includes a church with a capacity for 400 seat and 100-standing persons with chorus, sacristy, adoration chapel and technical and hygienic backgrounds. Furthermore, there is a educational/multifunction room, workshop and store of religious products, farther the parish part with the apartments, office for priests and underground garage. In addition to the building, there was created paved areas for pedestrian which responding to existing communications. Due to the removal of the parking lot in the northern part of the solved territory, the existing parking lot was extended on the south side and there was also created a new communication for cars, which connects the Northern Street Horníková with Western. In this communication, it is necessary to create a suitable road signage to prevent the supply of vehicles and it must not be used as an abbreviation in the traffic jam at the 2nd grade road communication.

Proposal for concert hall in the position of the Moravian Square, where in 1945 found called. The German House with a concert hall. Design a simple, rectangular mass with celoprsklenuo, perforated facade. Inside the hall layout, as a cornerstone of the entire draft, in ideal acoustic proportions, visibility, access to the hall, both with regard to the audience and the performers. The construction includes all the facilities and plants for the Philharmonic commensurate with the contemporary world architecture. It is offering a location opposite the street Veselá.

This thesis covers brand new detached showroom with one basement and two floors. The building is divided into 2 parts, the major part of the first floor sample room (showroom) for a maximum of 13 vehicles, offices and staff facilities salon. On the second floor is located the finance department and exemplary service area. In the basement of this building are public parking garage for 16 vehicles and car accessories stores. The second part of the new building is just overhead. It consists of a private car service for 5 vehicles, stock tires, utility room, car wash and storage of spare parts for cars. Flat roof supporting structure is made of pre-stressed girders reinforced with cross reinforced concrete slab with insulation. Cladding are ventilated insulated facade, supporting part is reinforced. The showroom form the majority of the building envelope glass facade. Finish of floors in office and showroom premises are ceramic tiles. In the Service and garages cast floor resistant to petroleum substances.

The goal of the project si developnemt of project documentation for a construction realisation of energy passive block of apartments together with design of conception of forced ventilation with recuperation unit. The design of building is conceived as building with flat roof, reinforced concrete load-bearing structure and collective underground parking. During the design emphasis was placed on low energy consumption of the building. Its energy efficiency was analysed according. ČSN 73 0540 and processed statement of energy efficiency. The result energy consumption of the structure is A – extremely efficient.

The diploma thesis deals with a project documentation of hotel building in Přerov. The object is designed as a detached building with one basement and four floors. There is an underground garage and technical rooms of the hotel situated in the basement. In the first floor, there are entrance hall, administrative part, restaurant and its hinterland. Another ground floors are designed to accommodate guests. The structural system is reinforced concrete skeleton. The perimeter wall is building from clay bricks. The object is covered with two flat roofs.

This thesis is focused on designing a new multipurpose building with parts used for apartments, administration offices and a bar. The land, which the building is situated on, is located in the city of Olomouc. The structure consist of five above-ground floors and one underground floor, where a garage is designed. The vertical supporting construction are made of reinforced cast-in-place concrete columns, the horizontal of reinforced concrete cast-in-place boards, other vertical walls are made of sand-lime and aerated concrete blocks. The roof is warm flat.

The focus of this diploma thesis is the elaboration of project documentation for a construction. The construction is a department store with eight residential units - a multifunctional building. The proposed building has five floors, a basement with cellars for each apartment, parking spaces for visitors of the department store, and independent mechanical parking system for residents of the building. The first floor is comprised of technical room, bicycle shed, and also a pharmacy, bakery, and florist with separate entrances. The second floor serves as a cafe with a terrace and sanitary facilities. There is also a drugstore and a clothing store. The other three floors are used for accommodation, comprising of eight apartments in total. The fifth floor consists of one apartment and a terrace for all residents. The building is designed as a reinforced concrete skeletal structure with a monolithic ceiling and stair slabs. Ceramic blocks are used as infill masonry as well as internal masonry. The roof is designed as flat walkable with concrete paving or as non-walkable with gravel, which is graded according to the floor.

The thesis focuses on the design of the underground garage in the centre of Brno under the Petrov hill. The main target of the thesis is to design spatial arrangement of the underground space and its feasibility study. In the following parts the design of the structural solution and its check calculation is carried out.

This master thesis deals with designing sports center in Havlíčkův Brod. It is an individually standing object, which is located on plot No. 653/1 in Havlíčkův Brod, in cadastre unit Havlíčkův Brod. The object of the sports center has two above-ground floor and basement. In the basement are designed storage spaces and underground garage. Vertical structures are made of cast-in-place reinforced concrete frame, space between columns is made of ceramic blocks and reinforced water-resistant walls. Horizontal structures are made of cast-in-place reinforced slabs. The foundations are designed as a cast-in-place foundation slab serves waterproofing basement. The roof is designed as a warm flat green roof. The building is insulated with contact thermal insulation system. The work includes project documentation for the construction.

The aim of this master thesis is multi-criteria assessment SBToolCZ of the building district department for Czech police in Kyjov. The building has a basement with underground garages, shooting range and technical facilities (boiler room, air conditioning room, storage, archives, cleaning room), and a ground floor with offices covered by a flat roof. The load-bearing structure of the basement is designed from watertight reinforced concrete. The ground floor has ceramic block walls. The floor and roof structure are designed from pre-stressed Spiroll. The building envelope is insulated with ETICS. The thesis also contains project documentation of building and HVAC design. The project was carried out in the AutoCad programme. Project documentation was prepared according to valid legal and technical regulations.