<p>This thesis presents the work done to implement new computational tools and methods dedicated to aircraft conceptual design sizing and optimization. These tools have been exercised on different aircraft concepts in order to validate them and assess their relevance and applicability to practical cases.First, a geometry construction protocol has been developed. It is indeed essential to have a geometry description that supports the derivation of all discretizations and idealizations used by the different analysis modules (aerodynamics, weights and balance, stability and control, etc.) for which an aircraft concept is evaluated. The geometry should also be intuitive to the user, general enough to describe a wide array of morphologies and suitable for optimization. All these conditions are fulfilled by an appropriate parameterization of the geometry. In addition, a tool named CADac (Computer Aided Design aircraft) has been created in order to produce automatically a closed and consistent CAD solid model of the designs under study. The produced CAD model is easily meshable and therefore high-fidelity Computational Fluid Dynamics (CFD) computations can be performed effortlessly without need for tedious and time-consuming post-CAD geometry repair.Second, an unsteady vortex-lattice method based on TORNADO has been implemented in order to enlarge to scope of flight conditions that can be analyzed. It has been validated satisfactorily for the sudden acceleration of a flat plate as well as for the static and dynamic derivatives of the Saab 105/SK 60.Finally, a methodology has been developed to compute quickly in a semi-empirical way the buffet envelope of new aircraft geometries at the conceptual stage. The parameters that demonstrate functional sensitivity to buffet onset have been identified and their relative effect quantified. The method uses a combination of simple sweep theory and fractional change theory as well as the buffet onset of a seed aircraft or a provided generic buffet onset to estimate the buffet envelope of any target geometry. The method proves to be flexible and robust enough to predict within mainly 5% (and in any case 9%) the buffet onset for a wide variety of aircrafts, from regional turboprop to long-haul wide body or high-speed business jets.This work was done within the 6^th European framework project SimSAC (Simulating Stability And Control) whose task is to create a multidisciplinary simulation environment named CEASIOM (Computerized Environment for Aircraft Synthesis and Integrated Optimization Methods), oriented toward stability and control and specially suited for aircraft conceptual design sizing and optimization.</p> / SimSAC

This thesis presents the work done to implement new computational tools and methods dedicated to aircraft conceptual design sizing and optimization. These tools have been exercised on different aircraft concepts in order to validate them and assess their relevance and applicability to practical cases. First, a geometry construction protocol has been developed. It is indeed essential to have a geometry description that supports the derivation of all discretizations and idealizations used by the different analysis modules (aerodynamics, weights and balance, stability and control, etc.) for which an aircraft concept is evaluated. The geometry should also be intuitive to the user, general enough to describe a wide array of morphologies and suitable for optimization. All these conditions are fulfilled by an appropriate parameterization of the geometry. In addition, a tool named CADac (Computer Aided Design aircraft) has been created in order to produce automatically a closed and consistent CAD solid model of the designs under study. The produced CAD model is easily meshable and therefore high-fidelity Computational Fluid Dynamics (CFD) computations can be performed effortlessly without need for tedious and time-consuming post-CAD geometry repair.Second, an unsteady vortex-lattice method based on TORNADO has been implemented in order to enlarge to scope of flight conditions that can be analyzed. It has been validated satisfactorily for the sudden acceleration of a flat plate as well as for the static and dynamic derivatives of the Saab 105/SK 60.Finally, a methodology has been developed to compute quickly in a semi-empirical way the buffet envelope of new aircraft geometries at the conceptual stage. The parameters that demonstrate functional sensitivity to buffet onset have been identified and their relative effect quantified. The method uses a combination of simple sweep theory and fractional change theory as well as the buffet onset of a seed aircraft or a provided generic buffet onset to estimate the buffet envelope of any target geometry. The method proves to be flexible and robust enough to predict within mainly 5% (and in any case 9%) the buffet onset for a wide variety of aircrafts, from regional turboprop to long-haul wide body or high-speed business jets.This work was done within the 6th European framework project SimSAC (Simulating Stability And Control) whose task is to create a multidisciplinary simulation environment named CEASIOM (Computerized Environment for Aircraft Synthesis and Integrated Optimization Methods), oriented toward stability and control and specially suited for aircraft conceptual design sizing and optimization. / QC 20101104 / SimSAC

The ability of fish to deform their bodies in steady swimming action is gaining from robotic designers. While bound by the same physical laws, fish have evolved to move in ways that often outperform artificial systems in critical measures such as efficiency, agility, and stealth through thousands of years of natural selection. As we expand our presence in the ocean with deep-sea exploration or offshore drilling for petroleum and natural gas, the demand for prolonging underwater operations is growing significantly. Therefore, it is critical for robotic designers to understand the physics of pisciform (fish-like) locomotion and learn how to effectively implement the propulsive mechanisms into their designs to create the next generation of aquatic robots. Aiming to assist this process, this thesis presents an experimental apparatus called Towed Biolocomotion Emulator (TBE), which is capable of imitating the undulating action of different fish species in steady swimming and can be quickly adapted to different configurations with modular modules. Using the TBE device, an experiment is performed to test its hydrodynamic performance and evaluate the effectiveness of the bio-inspired locomotion implemented on such a mechanical system. The analysis of hydrodynamic data collected from the experiment shows that there exists a small range of kinematic parameters where the undulating motion of the device produces the optimal performance. This result confirms the benefits of utilizing pisciform locomotion for small-scale underwater vehicles. In addition, this thesis also proposes a reduced-order flow model using the unsteady vortex lattice method (UVLM) to predict the hydrodynamic performance of such a system. The proposed model is then validated with the experimental data collected earlier. The tool developed can be employed to quickly explore the possible design space early in the conceptual design stage for such a bio-mimetic vehicle. / Master of Science / It is no surprise that through thousands of years of natural evolution, marine species possess incredible ability to navigate through water. As we expand our presence in the sea, more and more tasks require underwater operations such as ocean exploration, oil-rig maintenance, etc. Yet, most of the underwater robotic vehicles still utilize propellers as the primary propulsive mechanism. In many cases, the bio-inspired propulsion system that mimics the swimming action of fish offers many advantages in agility, maneuverability, and stealth. With the rising interest in the field, the works presented in this thesis aim to expand our understanding of how to implement the bio-inspired propulsive mechanism to robotic design. To achieve this, a mechanical device is designed to mimic the swimming action of different fish species. Then, an experiment is performed to subject the device to different fish-like motions and test their effectiveness. In addition, a reduced-ordered model is also introduced as an alternative method to predict the hydrodynamic performance of this propulsive mechanism. The works presented in this thesis help to expand the toolbox available for the engineer to design the next generation of the underwater robotic vehicle.

This dissertation presents shape and structural optimization studies on flapping wings for micro air vehicles. The design space of the optimization includes the wing planform and the structural properties that are relevant to the wing model being analyzed. The planform design is parameterized using a novel technique called modified Zimmerman, which extends the concept of Zimmerman planforms to include four ellipses rather than two. Three wing types are considered: rigid, plate-like deformable, and membrane. The rigid wing requires no structural design variables. The structural design variables for the plate-like wing are the thickness distribution polynomial coefficients. The structural variables for the membrane wing control the in-plane distributed forces which modulate the structural deformation of the wing. The rigid wing optimization is performed using the modified Zimmerman method to describe the wing. A quasi-steady aerodynamics model is used to calculate the thrust and input power required during the flapping cycle. An assumed inflow model is derived based on lifting-line theory and is used to better approximate the effects of the induced drag on the wing. A multi-objective optimization approach is used since more than one aspect is considered in flapping wing design. The the epsilon-constraint approach is used to calculate the Pareto optimal solutions that maximize the cycle-average thrust while minimizing the peak input power and the wing mass. An aeroelastic model is derived to calculate the aerodynamic performance and the structural response of the deformable wings. A linearized unsteady vortex lattice method is tightly coupled to a linear finite element model. The model is cost effective and the steady-state solution is solved by inverting a matrix. The aeroelastic model is used to maximize the thrust produced over one flapping cycle while minimizing the input power. / Ph. D.

Airplane wings, turbine blades and other structures subjected to air or water flows, can undergo motions depending on their flexibility. As such, the performance of these systems depends strongly on their geometry and material properties. Of particular importance is the contribution of different nonlinear aspects. These aspects can be of two types: aerodynamic and structural. Examples of aerodynamic aspects include but are not lomited to flow separation and wake effects. Examples of structural aspects include but not limited to large deformations (geometric nonlinearities), concentrated masses or elements (inertial nonlinearities) and freeplay. In some systems, and depending on the parameters, the nonlinearities can cause multiple solutions. Determining the effects of nonlinearities of an aeroelastic system on its response is crucial. In this dissertation, different aeroelastic configurations where nonlinear aspects may have significant effects on their performance are considered. These configurations include: the effects of the wake on the flutter speed of a wing placed under different angles of attack, the impacts of the wing rotation as well as the aerodynamic and structural nonlinearities on the flutter speed of a rotating blade, and the effects of the recently proposed nonlinear energy sink on the flutter and ensuing limit cycle oscillations of airfoils and wings. For the modeling and analysis of these systems, we use models with different levels of fidelity as required to achieve the stated goals. We also use nonlinear dynamic analysis tools such as the normal form to determine specific effects of nonlinearities on the type of instability. / Ph. D.