The aims of the work this thesis is based upon were to develop convenient analytical procedures for determining resin acids in biological and environmental matrices, and apply them to enhance understanding of the occurrence, exposure to and uptake by exposed individuals of resin acids. Particular focus has been on the workplace environment of the Swedish wood pellets industry. Sample extraction procedures and high-performance liquid chromatography/electrospray ionisation-mass spectrometry (HPLC/ESI-MS) methodologies were developed for measuring resin acids in dust, skin and urine samples. Chromatographic separation of abietic (AA) and pimaric acid was achieved by using a polar-embedded C12 stationary phase. The HPLC/ESI-MS method avoids undesirable oxidation of AA, which was found to occur during the derivatisation step in the standard MDHS 83/2 gas chromatography/flame ionisation detection (GC/FID) methodology, leading to false observations of both AA and the oxidation product 7-oxodehydroabietic acid (7-OXO). Personal exposures to resin acids in the Swedish wood pellet production industry were found to be lower, on average, than the British Occupational Exposure Limit for rosin (50 µg/m3). The oxidised resin acid 7-OXO, was detected in both dust and skin samples indicating the presence of allergenic resin acids. A correlation between air and post-shift urinary concentrations of dehydroabietic acid (DHAA), and a trend towards an increase in urinary 7-OXO during work shifts, were also observed. Whether the increase in 7-OXO was due to direct uptake or metabolism of other resin acids cannot be concluded from the results. An efficient HPLC/UV methodology with diode-array detection was developed for screening commercial products for rosin that could be used in laboratories lacking mass spectrometers. Very high concentrations of free resin acids were detected in depilatory wax strips using the method. / At the time of doctoral defense, the following paper was unpublished and had a status as follows: Paper 4: Submitted.

Submitted by Maria Aparecida (cidazen@gmail.com) on 2017-04-12T15:30:06Z No. of bitstreams: 1 Juliana Santos Farias.pdf: 1234303 bytes, checksum: 420e49b91acb05fb1346e95075411509 (MD5) / Made available in DSpace on 2017-04-12T15:30:06Z (GMT). No. of bitstreams: 1 Juliana Santos Farias.pdf: 1234303 bytes, checksum: 420e49b91acb05fb1346e95075411509 (MD5) Previous issue date: 2017-03-06 / CAPES, FAPEMA,CNPQ / This paper describes the development of a simple and new sensor electrochemical determination of flutamide in voltamétrica formulations pharmaceutical and artificial urine specimens using a carbon electrode vitreous (ECV) modified with oxidized carbon nanotubes and graphene oxide (NCO-OG), which was named ECV/NCO-OG. Electronic microscopy techniques scanning (SEM) and Raman Spectroscopy were used for the characterization of carbon based materials. The electrochemical response of the analyte front of the ECV/NCO-OG was investigated by cyclic voltammetry techniques (VC) and square wave voltammetry (VOQ). The sensor exhibited a high activity eletrocatalítica for the reduction of flutamide in 0.05 V vs. Ag/AgCl. The parameters experimental influence the response of the electrode was investigated and the optimum conditions were found for the electrode modified with NCO-OG, in Britton-Robinson buffer solution-BR on concentration of 0.1 mol L-1 (pH 5). The proposed sensor presented a wide range of linear response of concentration for the flutamide of 0.1 to 1000 µmol L-1 (or µ g L-1 27.6 to 0.27 g L-1) for n = 15 (R2 = 0.997), limit of detection (LOD), limit of quantification (LOQ), and sensitivity of 0.03 µmol L-1, 0.1 µmol L-1, and 0.30 µmol µA -1 L, respectively. The ECV/NCO-OG was successfully applied to the determination of flutamide in pharmaceutical formulations used in the treatment of prostate cancer and artificial urine samples. The results obtained with the proposed sensor were compared with the method described in the literature and showed a level of 95% confidence, demonstrating that there is no statistical difference between the method of reference and the method proposed. The addition and recovery studies show that the proposed method presents a satisfactory accuracy with average value of 101% recovery ( 1)%. for the fortified samples. / Este trabalho descreve o desenvolvimento de um simples e novo sensor eletroquímico para determinação voltamétrica de flutamida em formulações farmacêuticas e amostras de urina artificial empregando um eletrodo de carbono vítreo (ECV) modificado com nanotubos de carbono oxidado e óxido de grafeno (NCO-OG), o qual foi denominado ECV/NCO-OG. As técnicas microscopia eletrônica de varredura (MEV) e a Espectroscopia Raman foram utilizadas para a caracterização dos materiais à base de carbono. A resposta eletroquímica do analito frente ao ECV/NCO-OG foi investigada através das técnicas de voltametria cíclica (VC) e voltametria de onda quadrada (VOQ). O sensor exibiu uma alta atividade eletrocatalítica para a redução da flutamida em 0,05 V vs Ag/AgCl. Os parâmetros experimentais que influenciam a resposta do eletrodo foram investigados e as condições ótimas foram encontradas para o eletrodo modificado com NCO-OG, em solução tampão Britton-Robinson-BR na concentração de 0,1 mol L-1 (pH 5). O sensor proposto apresentou uma ampla faixa de resposta linear de concentração para a flutamida de 0,1 a 1000 µmol L-1 (ou 27,6 µg L-1 a 0,27 g L-1) para n=15 (R2=0,997), com limite de detecção (LOD), limite de quantificação (LOQ), e sensibilidade de 0,03 µmol L-1, 0,1 µmol L-1, e 0,30 µA µmol-1 L, respectivamente. O ECV/NCO-OG foi aplicado com sucesso para a determinação de flutamida em formulações farmacêuticas utilizadas no tratamento de câncer de próstata e amostras de urina artificial. Os resultados obtidos com o sensor proposto foram comparados com o método descrito na literatura e observou-se um nível de confiança de 95%, demonstrando que não há diferença estatística entre o método de referência e o método proposto. Os estudos de adição e recuperação mostram que o método proposto apresenta uma exatidão satisfatória com valor médio de recuperação de 101% ( 1) %. para as amostras fortificadas.

The aim of this diploma thesis was the development of a screening method for analysis of 17 benzodiazepines in urine samples using ultra high-performance liquid chromatography with tandem mass spectrometric detection. The partial task was to optimize the conditions for the enzymatic hydrolysis of benzodiazepine glucuronides present in urine using design of experiments (DOE). The optimized chromatographic system consisted of a Zorbax Eclipse Plus Phenyl-Hexyl RRHD column (100 × 2.1 mm, 1.8 μm) and mobile phase consisting of water with 0.1 % acetic acid (component A) and acetonitrile with 0.1 % acetic acid (component B) in various ratios according to the gradient program. Flow rate was 0.2 ml/min, column temperature was 40 řC, and total analysis time was 12 min. Calibration curves for all analytes were measured under optimized conditions in methanol and urine. After optimal detection conditions for oxazepam-glucuronide were found, oxazepam glucuronide was hydrolysed using β-glucuronidase from the abalone to confirm the functionality of the enzyme within the pilot experiment. Optimization of enzymatic hydrolysis conditions via 27 experiments proposed by program Minitab 16 using the Box-Behnken design will be realized later.