The diploma thesis deals with design documentation multifuncional object in Uherský Brod. The building consists of two parts. First part has five floors and saddle roof with an angle of 12°, second part has three floors and green roof. In the basement are car parking and storages. In the first floor is a pharmacy, restaurant, shop and hairdresser´s. In the second floor is located fitness center and four flats. In the third and fourth floors are nine flats. The structural system of building is reinforced concrete frame. The project was processed by a computer program ArchiCAD.

Subject of the solution master´s thesis is new domestic building with polyfunction. It is four floors building with underground floor. Construction system is made by column with monolithic ferron concrete ceilings and monoplane roof. In underground floor is a garage. In First floor on south side is a space designated for commercial activities. Next on the floor is technical facilities and 7 flats. In next floors there is always 11 flats. Building is located in straight terrain in the development area of new houses in Zlin in area Bonecko.

This diploma thesis is focused on design cast-in-place reinforced concrete structure multi-storey multifunctional building according to the source material. Specifically, foundation slab and external wall in B1 taking into account the waterproofness of the construction. Then staircase, column in lowest storey and two floor slab are designed as selected load-bearing structure. Elements are dimensioned according to ČSN EN 1992-1-1: Design of concrete structures - general rules and rules for building structures. In the drawing part of the diploma thesis are drawn drawings of the shapes and reinforcement.

The subject of the thesis is the design of the detached multifunctional house in the district Královo Pole, Brno. The thesis form matches the project documentation for construction execution. The new building consists of five floors, basement and flat vegetation roof based on white tank. The aboveground floors include two stores, cafe, 14 flat units and 12 office units. Every floor has a stroller storage and the utility room which are available for all residents. The basement serves as a collective parking and there is located also the technical room. The storage cubicles for flat units are designed in the corresponding floors close to the staircase. The parking is also placed on the paved space in front of the building fitting 12 parking places including the one for the disabled. The construction system is bidirectional, formed by masonry brick elements, except for the peripheral basement masonry, which is monolithic waterproof concrete-iron structure (white tank). The ceiling construction is designed as a monolithic concrete-iron cross reinforced plate. The whole object is isolated by certified contact thermal insulation system of mineral wool thick 200 mm.

Diploma thesis is in form of building documentation for construction according to valid regulations. Designed mixed-use building is located in Zlín on plots no. 2865/3, 2865/22, 2865/23 and 2866. Building has shape of letter L, it has three above-ground floors and undergroud garage. Building has three separate parts – part with flats of sizes 3+kk and 4+kk, training centre and community centre. Each part has different number of above-ground floors. New building is detached house with maximum height 10,48 m. Object is constructed with ceramics blocks. It has ventilated facade and flat green roof. Ceiling is designed as cast-in-place reinforced slab. Material for foundations is waterproof concrete. Diploma thesis also includes assessment of thermal technology, acoustic and fire safety.

Master´s thesis describes foundation of reinforced concrete framed building and preliminary design of upper construction. Calculation of internal forces was performed by computer program SCIA Engineer like 3D model. This substructure is designed as water resistant construction that is supported by deep foundations.

Thesis "Library Information Centre" is processed in the form of detailed project documentation containing all requirements in accordance with applicable standards and regulations. The proposed building is designed as a four-storey building shape of a rounded rectangular triangle with dimensions of 33.5 x 33.5 m, which is a full basement. The building is used for administration, services and information centers. In 1PP is located technical facilities, warehouses and supply. On the 1st floor there is space for services and administration. In the 2nd floor-3rd floor spaces are located Information Center. In the last nadzemím floor space technical background. The building is based on a baseplate. Used a support system is a combined structural system of walls and columns. The building is designed with an offset raster light curtain wall system complete with sun protection. The object is implemented to suit the requirements of the wheelchair. For the object will be set up areas for landscaping and furniture for visitors to the building. On the southwest side of the parking lot will be built with 39 stalls including 5 places for the disabled with a reduced pavement. In the Northeast will be built with 44 parking spaces for cars.

The subject of diploma thesis is processing of the desing documentation for new multifunctional building in the street Dělnická, cadastre unit Komín, Brno - Komin. The building is a 3 floors and one underground floor and is designed as a last building in the street on the nearly flat land. In the building is located non-residential space, dwelling units and studios. Non-residential space comprise seven parking spaces in a public underground garage, two stores barrier-free solution with the facilities and two studios 1 + 1. The residential part has two dwelling units 1 + kk, two dwelling units 2 +1 and two dwelling units 4 + kk. The building is based on a waterproof concrete structure "white tub". The vertical structure is built of clay blocks Porotherm, horizontal structures are cast-in-place reinforced concrete. The exterior building envelope is completed with thermal insulation. An internal staircase is cast-in-place reinforced concrete. The entrance to the garage for cars is possible by Autolift. The building is roofed with warm flat roof. The drawings are processed in AutoCAD software visualization are processed in Sketch Up

This diploma thesis discusses the basics of nanotechnology as a science and nanotechnology of concrete. Additionally, it describes carbon nanotubes and the possibilities of their dispersion using high shear mixing and sonication. This thesis further provides findings about ultrasonic dispersion parameters and characteristics of materials with the addition of carbon nanotubes. The experimental of part of this thesis focuses on the possibility of dispersing carbon nanotubes, deals with the issue of incorporating carbon nanotubes into the concrete matrix and describes its effects on the final properties of concrete. It has been observed to which extent the carbon nanotubes may affect selected physico-mechanical properties and durability of concrete.

The focus of this diploma thesis is the elaboration of project documentation for a construction. The construction is a department store with eight residential units - a multifunctional building. The proposed building has five floors, a basement with cellars for each apartment, parking spaces for visitors of the department store, and independent mechanical parking system for residents of the building. The first floor is comprised of technical room, bicycle shed, and also a pharmacy, bakery, and florist with separate entrances. The second floor serves as a cafe with a terrace and sanitary facilities. There is also a drugstore and a clothing store. The other three floors are used for accommodation, comprising of eight apartments in total. The fifth floor consists of one apartment and a terrace for all residents. The building is designed as a reinforced concrete skeletal structure with a monolithic ceiling and stair slabs. Ceramic blocks are used as infill masonry as well as internal masonry. The roof is designed as flat walkable with concrete paving or as non-walkable with gravel, which is graded according to the floor.