1 |
Variable Damping Control of a Robotic Arm to Improve Trade-off Between Performance and StabilityJanuary 2019 (has links)
abstract: Admittance control with fixed damping has been a successful control strategy in previous human-robotic interaction research. This research implements a variable damping admittance controller in a 7-DOF robotic arm coupled with a human subject’s arm at the end effector to study the trade-off of agility and stability and aims to produce a control scheme which displays both fast rise time and stability. The variable damping controller uses a measure of intent of movement to vary damping to aid the user’s movement to a target. The range of damping values is bounded by incorporating knowledge of a human arm to ensure the stability of the coupled human-robot system. Human subjects completed experiments with fixed positive, fixed negative, and variable damping controllers to evaluate the variable damping controller’s ability to increase agility and stability. Comparisons of the two fixed damping controllers showed as fixed damping increased, the coupled human-robot system reacted with less overshoot at the expense of rise time, which is used as a measure of agility. The inverse was also true; as damping became increasingly negative, the overshoot and stability of the system was compromised, while the rise time became faster. Analysis of the variable damping controller demonstrated humans could extract the benefits of the variable damping controller in its ability to increase agility in comparison to a positive damping controller and increase stability in comparison to a negative damping controller. / Dissertation/Thesis / Masters Thesis Mechanical Engineering 2019
|
2 |
Hydropneumatic semi-active suspension system with continuously variable dampingVosloo, André Gerhard January 2019 (has links)
A well-known challenge in vehicle dynamics is to design a vehicle that will not only keep the occupants comfortable, but will also ensure safe and stable operation during various manoeuvres over multiple driving surfaces. A soft and compliant suspension is generally required for good ride comfort, while a stiff suspension with a low centre of mass is required for improved handling. These contradicting factors in the design process is commonly referred to as the ride comfort versus handling compromise.
A newly developed semi-active hydropneumatic suspension system is proposed to reduce or negate this compromise by being able to change its characteristics according to the dynamic state of the vehicle. The unit is equipped with two proportional solenoid valves that can provide continuously variable damping. In addition, the valves are able to completely close off flow to compressible gas volumes to provide four discrete stiffness characteristics.
This suspension system is based on a previously developed suspension that had only two state (open or closed) valves, which provided discrete damping characteristics. A thorough investigation of the older system proved that the system was capable of addressing the ride comfort versus handling compromise.
The purpose of this study was to investigate whether the updated design could deliver improved performance and to recommend focus areas for future research initiatives.
The suspension system’s characteristics were determined experimentally by actuating the unit on a test bench. Results indicated that the unit produced the desired stiffness, low damping and response time characteristics. A mathematical model of the suspension unit was developed and validated against experimental data. The model was used in single degree of freedom simulations to investigate both passive and semi-active controlled performance. Results indicated that the suspension could be semi-actively controlled for improve ride comfort. However, the magnitude of improvements with semi-active control, which includes a suitable response time, proved to be rather insignificant compared to the optimum passive suspension. / Dissertation (MEng)--University of Pretora, 2019. / Mechanical and Aeronautical Engineering / MEng (Mechanical) / Unrestricted
|
3 |
Achieving controllable continuous variable damping within a semi-active hydro-pneumatic suspension systemDe Wet, Benjamin January 2020 (has links)
The compromise between ride comfort and handling for a passive suspension system is a well-known and often researched problem. Semi-active suspension systems offer significant improvements to this compromise. One example of a semi-active system, that can change both spring and damper characteristics between two discrete values is the 4-state semi-active hydro-pneumatic suspension system. This system can switch between a ”ride comfort mode” (soft spring and low damping) and a ”handling mode” (stiff spring and high damping) within 100ms, improving both ride comfort and handling.
The discrete 4S4 could be improved upon further by adding continuous variable damping. Work on this topic showed great promise but also posed its challenges in achieving this in a safe and controllable manner.
In order to make continuous variable damping a reality a new configuration for the 4S4 is proposed. This new configuration incorporates a blow-off damper in parallel with a proportional flow control valve. The system ensures that, in the highly non-linear closing region of the proportional flow control valve, adequate damping for handling is maintained and uncontrollable peak pressure differences are avoided.
Experimental work conducted showed that the system was capable of achieving the required spring and variable damping characteristics in a safe and controllable manner. The experimental data was used for parametrizing and validating a physics based mathematical model of the suspension system.
The mathematical model incorporates the: pressure drop vs: flow characteristics for both the blow-off and proportional valves, response time for the on-off valves as well as the gas pressure vs: flow characteristic incorporating the compressibility of the oil and thermal properties of the gas. This model can be used to make informed decisions on further prototype development or in full vehicle simulations.
The system makes continuous variable damping possible ranging from the optimal damping characteristic for handling to the low damping characteristic required for ride comfort. The system also shows a significant reduction in friction. / Dissertation (MEng)--University of Pretoria, 2020. / VDG / University of Pretoria / Mechanical and Aeronautical Engineering / MEng / Unrestricted
|
4 |
Um estudo na teoria do movimento brownianno com viscosidade vari?velSilva, Jo?o Maria da 20 June 2003 (has links)
Made available in DSpace on 2014-12-17T15:14:51Z (GMT). No. of bitstreams: 1
JoaoMS.pdf: 634960 bytes, checksum: 579213d21eb24a6a8d342d2c3b15bc3d (MD5)
Previous issue date: 2003-06-20 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / In this work we investigate the stochastic behavior of a large class of systems with variable damping which are described by a time-dependent Lagrangian. Our stochastic approach is based on the Langevin treatment describing the motion of a classical Brownian particle of mass m. Two situations of physical interest are considered. In the first one, we discuss in detail an application of the standard Langevin treatment (white noise) for the variable damping system. In the second one, a more general viewpoint is adopted by assuming a given expression to the so-called collored noise. For both cases, the basic diffententiaql equations are analytically solved and al the quantities physically relevant are explicitly determined.
The results depend on an arbitrary q parameter measuring how the behavior of the system departs from the standard brownian particle with constant viscosity. Several types of sthocastic behavior (superdiffusive and subdiffusive) are obteinded when the free pamameter varies continuosly.
However, all the results of the conventional Langevin approach with constant damping are recovered in the limit q = 1 / Neste trabalho n?s investigamos o comportamento estoc?stico de uma grande classe de sistemas com amortecimento vari?vel descritos por uma lagraniana dependente do tempo. Nossa abordagem estoc?stica ? baseada no formalismo de Langevin descrevendo o comportamento de uma part?cula browniana cl?ssica de massa m. Duas situa??es de interesse f?sico s?o consideradas. Inicialmente, uma aplica??o do tratamento padr?o de Langevin (ru?do branco) para viscosidade vari?vel ? discutido em detalhe. Na segunda abordagem, um ponto de vista mais geral ? adotado supondo uma dada express?o para o chamado ru?do branco. Em ambos os casos as equa??es diferenciais b?sicas s?o analiticamente resolvidas, e todas as quantidades fisicamente relevantes s?o explicitamente determinadas. Os resultados dependem de um par?metro arbitr?rio (q) medindo como o comportamento din?mico do sistema se afasta daquele apresentado pela part?cula browniana com viscosidade constante. V?rios tipos de comportamentos estoc?sticos (subsifusivos and superdifusivos) s?o obtidos quando o par?metro livre q varia continuamente. Contudo, no limite q -> 1, todos os resultados da abordagem de Langevin convencional s?o recuperados
|
5 |
Continuously Variable Amplification Device for Semi-Active Vibration Control of Seismically Loaded StructuresGrupenhof, Kyle D. 25 July 2012 (has links)
No description available.
|
Page generated in 0.1279 seconds