In these diploma thesis we deal with the design of a new library with a cafe. The bilding is located on a flat land in the city of Trencin, near Trencin castle, which is the main landmark of Trencin. There is also a bus and railway station nearby. It is a two-storey building with a partial basement. In the basement of the building will be located archive library and technical equipment. On the first floor there is the main part of the library with a cafe. On the second floor there will be a library with an administrative department. The construction is based on the White tub system. The construction system is skeleton with reinforced concrete ceilings. The roof is designed as flat and vegetation. A ventilated brick facade is designed for the library.

The Thesis deals with a design and project documentation for the public library in Ivanovice na Hané. The construction was designed as the four-floor object with a partial cellar. The ground plan creates a rectangle. The object is roofed with a warm deck flat roof. In the basement, an archive area and a utility room prevail. On the first floor of above-ground, there is a space for public and employees. In the separated area, the Confectionery equipped with own sanitary facility for customers and employees is located. There is a spacious entry hall with the access to individual floors. On the second floor, the free library and the children´s department are situated including a lecture hall with own facilities above the Confectionery. On the third floor, there are the library headquarters and the reading area. You can find the sanitary facilities for public on each floor. The object structure is made of a monolithic reinforced concrete skeleton filled with the masonry from acoustic ceramic tiles on the above-grounded floors. In the basement, the structure is created by reinforced concrete walls and walls from the formwork. The ceiling is made of reinforced concrete prestressed panels. The object is based on the ground slabs. In the area of lift shafts, the structure is from the reinforced concrete slab. The walls in the basement are insulated with the XPS polystyrene; in the above-ground area by mineral wood boards and ventilated facades.

This diploma thesis presents a project documentation for construction of a zoo pavilion with a restaurant. The structure has to be designed in compliance with regulations for buildings with almost zero energy consumption. Its construction site is located within the existing compound of Prague’s zoo on plot no. 1491/1. The pavilion is proposed to house giant pandas. The building has three floors- one underground and two above. It is covered by a flat green roof. In terms of circulation, the structure is composed from two parts. The first one is formed by premises for the pandas, including necessary facilities for their wellbeing and their breeding; and the second part is visitors’ part, including restaurant, gift shop and amenities. The building is enclosed by two exterior expositions for pandas which are connected with the interior exposition premises by two ramps- tunnels. There is a roof terrace adjacent to the restaurant for visitors to enjoy the view of pandas in their exterior grounds. The vertical structure of the pavilion for giant pandas is a combination of load bearing brick walls and cast-in-place concrete walls- the underground floor and the ground floor is formed by the cast-in-place concrete walls and the upper floor is formed by the brick walls made out of autoclaved aerated concrete blocks. The horizontal structures are formed by prestressed concreted floor panels or in the case of the upper floor by cast-in-place reinforced concrete slabs.

Master´s thesis premises designed Health centre Sadová on the level of documentary for execution of works. The building has thirteen medical equipment with facilities, pharmacy, health food store, optics and refreshment. The building is simply-shaped, with four above-ground floors and basement. The structural systém is cast-in-place concrete frame. The infill wall in basement is walled with permanent formwork blocks and the ground floors are walled with clay blocks. Floor structures are cast-in-place reinforced concrete. Roof structure is designed like flat roof. The building has thermal insulation and cladding with fibre cement board.

Master thesis „Multifunctional Building“ is composed in the form of project documentation. Designed building is situated close to the Svitava river. The supporting structure in the basement is designed from shutter shaped pieces Best and the other storages from the system Ytong. The armoured concreted slab is designed for the ceilings. The roof is drawn as platform. The whole building will be insulated for recommended values. The facade in the first storage is designed as ventilated Novabrick and in the other storeys the facade will be from plaster Cemix. The building has three storages and partly basement. The building consists of centre for rehabilitation, shop and three flats. The drawings are compiled in CAD program.

This thesis deals with the detailed documentation of the medical center . Estimated location of this building is on land No. 677/1 in Kutna Hora in the hospital Kutna Hora in the administrative area of Kutna Hora in Central Bohemia. Currently no land use. The land is owned by the investor , which is the Central Region. Newly built four-storey medical center will serve mainly for the provision of outpatient health care professional doctors and pharmacy , then there will be placed exit station emergency medical services and emergency medical call center services 155, 112 and emergency office space. The project was based on the layout of the study. The result of this work is to complete detailed documentation of the A building. Documentation includes drawings situation , surveying the situation , floor plans , sections, elevations , drawings, foundations , ceilings and details. Furthermore, a technical report , listing the elements of fire safety of the building , Thermal and acoustic assessment of the construction , specializing processed from concrete structures and building ventilation .

Master thesis of "Multifunctional Building Kounicova" is composed in the form of project documentation. The building is designed as a shopping mall and office space and it is situated in the centre of Brno city. The building has four floors and it is partly basement. The load-bearing structure consists of a monolithic reinforced concrete skeleton with flat roof. The drawings are processed in CAD program.

The subject of this master’s thesis is elaboration of project documentation of a residental building. It is a four above-ground floors residental object with a one underground floor. There are 9 apartments in residental floors, where one of them is designed as a flat with disability facilities. In the underground floor there is built-in garage for 18 cars and apartments accessory like cellars and others areas. Object is covered with flat roofs, most of them are terraces or rooftop gardens.

The theme of the diploma’s thesis is a Multifuntional house in Beroun. It is a new building of an independently building. The building is situated in the part of Plzeňské předměstí in the town Beroun, on the Košťálkova street. The rectangular building has three aboveground floors and one underground floor. There are a café with facilities, two shops, a utility room, the main entrance and household facilities on the partunderground floor. On the aboveground floors are situated 14 dwelling unit of different sizes, one of them is designed for persons with reduced mobility and orientation. The supporting vertical system is formed a of a reinforced concrete skeleton and a infill wall from ceramic bricks POROTHERM. Reinforced concrete slabs create the horizontal supporting constructions. A vegetation flat roof forms the roofing above whole building. The peripheral building shell consists of a ventilated facade from fiber-cement boards.

This final thesis projects an areal of riding center with four objects. The first one is complex of stabels ,the second one is riding hall, , and the last two area family house and litte apartment for accomodation of employeers and visiters. For objects one and two is complete documentation, the other ones are processed as a studie. All the buildings are designed as a timber structure, the ridding hall is created by glue laminated timber girders.