Mensuration electrolytic conductivity liquid inevitable among fundamental chemical analyses. Problems solving in these work deal with creation measuring instrument, which will able in selected range measure conductivity solution. Use differencial measuring method. Components work is moulding and simulation electronic system. Optimalization basic involvement operational amplifier.

The aim of this work is fabrication of nanostructures and measurement of their electrotransport properties. There are two different methods used for fabrication - electron beam lithography with sputtering of thin films and focused ion beam with deposition from gas phase. I-V characteristic was measured for characterisation of as prepared nanostructures - wires. Material of wires prepared by using of electron beam lithography was permalloy - an alloy of iron and nickel. Second types of wires prepared by using of chemical vapor deposition induced by focused ion beam was platinum based.

Thesis deals with study of separators and membranes, suitable for using in alkali electrochemical applications like fuel cells or electrolysis. As basic material for membranes production is used polyvinylalkohol (PVA). Various methods of PVA cross linking are introduced in the thesis. PVA membranes are also doped by various types of additives to improve the attributes of the membranes like mechanical stability and or conductivity. The aim of the work is verification of parameters of membranes, doped by alkali hydroxides KOH, NaOH and LiOH at various temperatures. These hydroxides are added to the membrane especially for increasing of membrane conductivity.

The main purpose of this diploma thesis is to check up and compare empirical formulae (Hazen, Slichter, Terzaghi, Beyer, Zauerbrej, Krüger, Kozeny, Zunker, Zamarin, USBR, Pavčič) for determining hydraulic conductivity, which are mostly publicated in different and dimensionally inhomogenous forms. The importance of an accurate determination of hydraulic conductivity and the derivation of a general formula for determining hydraulic conductivity are listed in the first part of this diploma thesis. Assessment methodology and empirical formulae in dimensional homogenous form are described in the following part. Evaluating and comparing of empirical formulae is mentioned in the last part. According to the results of this diploma thesis, the best empirical formula for determinig and estimating hydraulic conductivity is Hazen formula. Formula with the widest range of validity is Slichter formula.

The aim of this thesis is to compare the results of water infiltration from field tests, from laboratories and from numerical modeling at two selected locations. The first objective is the search procedure and the description of both sites and its adjacent areas. Further work continues with infiltration field tests using ring infiltrometer, at first theoretically for each method, and then practically with own personal measurements in the field. Further from the collected soil samples the measurements are performed in the laboratory, first in the permeameter, and followed by the grain size distribution test, from which the hydraulic conductivity is derived by using empirical formulas. At last the numerical modeling is used and all the results are compared. In the final phase of thesis the recommendations are given for infiltration at various locations and comparsion of the infiltration methods.

Our aim in the present work is to provide and evaluate AC and DC characteristics of the polyaniline based materials. Different experiemtal techniques and devices have been used to achieve this goal. An introduction to the theoretical concepts of conductivity is given as well. The core of this thesis is an investigation of temperature and low pressure dependences, as well as the ageing effects for two systems (composites) in respect of the different preparation conditions such as dopants and their molar concentration, origin and the content of inorganic component and the way of polymerisation. An agreement with theoretical models is discussed.

Title: Study of electrical and dielectric properties of conducting polymers Author: Mgr. Martin Varga Department: Department of Macromolecular Physics Supervisor: RNDr. Jan Prokeš, CSc., Department of Macromolecular Physics Abstract: Charge transport in polyaniline (PANI) and polypyrrole (PPy) was studied in respect to various oxidants, dopants, morphology, and other modifica- tions in their synthesis. The mechanism of transport was discussed in the frame- work of combination of several models characteristic for disordered solids due to inherent heterogeneous structure of conducting polymers. Effect of drying on conductivity was studied and the long-time limit was explained with the diffusion- based model for bulk materials. For PPy nanotubes stability in strong alkaline media and aging were studied by AC and DC techniques. While conductivity of naturally aged samples after two years remained in the same order of magni- tude, after exposure to alkaline media or accelerated aging at high temperatures, conductivity decreased several orders of magnitude. Degraded material exhibited strong disorder and the transport model was completely changed. Despite severe treatment electrical properties were still comparable to other as-prepared mate- rials. Finally, an application example as ammonia sensor, the response of...

This aim of task deals with study of heat dissipation mechanisms and the description of physical phenomena, which is accompanied by non-stationary measurement of thermal characteristics by the method "hot-wire method". In particular, we observe the coefficient of thermal conductivity and its dependence on various variables such as the temperature of the measured sample, its moisture state, the volume of the sample and its porosity. The above mentioned findings are used for the invention of the measuring device of a nonstationary gauge, which is based on regular heating and is dedicated to measuring the thermal conductivity coefficient and the heat capacity by the "hot-wire method" method. In the last part of the thesis is verified functionality of the proposed measuring device, the suitability of the created algorithm for the processing of the measured data and the evaluation of the results was verified. The reproducibility of the measurements was verified and the measured results were compared with the measurement methods, which are commonly used. the influence of humidity on the coefficient of thermal conductivity.

The diploma thesis is focused on issues of measurement and evaluation of hydraulic characteristics of soil. In the literary research, the definitions of hydraulic conductivity and retention curve of soil moisture, their measurements in laboratory and field conditions and the prediction of these characteristics by using of pedotransfer functions. In the practical part of the diploma thesis, an evaluation of the hydraulic conductivity of soil from the experimental areas near the village Bohaté Málkovice. Two-cylindrical and mini-disc infiltration meters were used for field measurements, and a constant-gradient permeameter was used in the laboratory. Physical and empirical equations were used to evaluate the hydraulic conductivity. The results were processed numerically, tabulated and then compared.

This aim of task deals with study of heat dissipation mechanisms and the description of physical phenomena, which is accompanied by non-stationary measurement of thermal characteristics by the method "hot-wire method". In particular, we observe the coefficient of thermal conductivity and its dependence on various variables such as the temperature of the measured sample, its moisture state, the volume of the sample and its porosity. The above mentioned findings are used for the invention of the measuring device of a nonstationary gauge, which is based on regular heating and is dedicated to measuring the thermal conductivity coefficient and the heat capacity by the "hot-wire method" method. In the last part of the thesis is verified functionality of the proposed measuring device, the suitability of the created algorithm for the processing of the measured data and the evaluation of the results was verified. The reproducibility of the measurements was verified and the measured results were compared with the measurement methods, which are commonly used. the influence of humidity on the coefficient of thermal conductivity.