The subject of this dissertation is the assessment and optimization of water distribution in the group water supply. The water supply networks are located in the Water Association of Babicko, former district of Uherské Hradiště, region of Zlín. The objective of this work is the unification of the entire documentation for all projects, creation of a hydraulic model of water supply network and subsequent verification of the existing capacities and pressure ratios. This work is particularly focused on the evaluation of pressure ratios at the highest and the lowest points of villages, whether they correspond to the legal limits, and subsequent design of a possible division to pressure zones.

This diploma thesis deals with sanitation installations in residential building in Brno. The theoretical part is devoted to the analysis of the topic with emphasis on Individual ways of preparation hot water in residential buildings. Technical part then solves the sanitation instalations of this building in the selected variation. Calculation part contains design and proportions of sewerage and rainwater system, internal water installations and their connection to present technical networks. I tis a multi-story building with two underground floors used for parking and five floors designed for housing. Project was done according to current Czech and Europe standarts and regulations.

The final thesis deals with the heating of the hospital building and preparation of the domestic hot water by cogeneration unit. The building will be largely heated by plate radiators. As a heat source is used a cogeneration unit with combustion engine. The project deals with the design dimensioning and connection of these parts.

The introduction of theoretical part deals history of floor heating. Here is an overview of the technology, which was for centuries used for floor heating. Further included in the introductory part of the aggregate materials used, which are used for floor heating, and used. In the next part of the theoretical introduction we are given the best known ecological heat source. These are mainly heat pumps and solar collectors. The last part is made in the proposal which are important values calculated for the design and seamless use of central heating system.

Thesis deals with the technical audit of public water supply. The first part is devoted to the current state of the problem in the Czech Republic and abroad. The thesis describes the methodology developed by ÚVHO FAST Brno, which is used to evaluate technical condition of selected parts of the water supply infrastructure. In the practical part of the thesis, the aplication TEA Water is used in the preparation of a technical audit for the part of the water supply of Brno.

This thesis focused on creating a model of a small hydropower plant model (SHPP) and a part of the electricity network in the simulation software "PSCAD" (basing on real sources). The model will be specified on the basis of the data obtained from the measurements to correspond with the real equipment.

This thesis deals with the optimization of sewer heat recovery. For proper design and optimization it is necessary to use three basic methods: diagnostics, heat balance calculations and modeling. In 2D software Area Calculation are simulated different types of sewer exchangers arranged in sewer pipes. Using models of software CalA and simulations will be selected optimal variant. Using software BSim, which is based on more zone numerical simulation of the energy needs of buildings in relation to indoor climate, are detected heat needs of an office building. The optimal number of sewer exchanger is designed from the identified performance heat exchangers and supplies heat for the building.

The thesis discusses possible ways to reduce or completely eliminate pesticide compounds from drinking water that are produced at a water treatment plant Hrdibořice. The work is divided into theoretical and practical parts. The theoretical part lists kinds of pesticides that occur in water, how they are reduced or eliminated. Furthermore, this section describes the existing water treatment technologies at the Central Committee Hrdibořice, including water sources. In the practical part, pilot tests on two types of filters models with filtering bed of granular activated carbon (hereinafter GAU) were carried out. On the basis of information obtained from the literature and on findings from the pilot tests, designs of technological equipment for pesticide removal from drinking water at water treatment Hrdiborice were carried out. Next, cost estimates for the proposed variant solutions including operating costs were suggested.

The Diploma thesis contains design of plumbing and gas installations in a pension. The theory solves warming of water, ways of warming, and dimensioning according to ČSN 06 0320. The calculation part solves variants of hot water preparations and installations of sewerage water. The practical part contains a design and a projekt of plumbing and gas installations.

In this thesis we study the properties of exoplanetary atmospheres. The first part describes methods and instruments for searching exoplanets, statistics of discovered exoplanets and the sampling factor. The second part describes the properties of chosen planets and moons in the Solar system (Venus, Mars and Titan) and also possible properties of the exoplanetary atmospheres that are only briefly understood. The third part describes the atmospheric models which incorporate full 3D model of the atmosphere, dynamical core, shallow-water model and 1D spherically-symmetric model. We also show the results of exoplanetary atmospheric models published in the scientific journals. This part also describes the icosahedral geodetic grid that is advantageous for the global climatic models, and also discretisation on sphere and the application of the operators (gradient, divergence, vorticity) on geodetic grid. The fourth part discusses results of the numerical solution of the atmospheric circulation with the forcing on geodetic grid. In this part we also show global maps of the variables after a particular time of the numerical integration and also the evolution of the variables at chosen points in time. In the discussion part we examine the results of our program. The results of the numerical integrations (chosen...