The first topic of this thesis is to propose a novel voltage-to-frequency converter (VFC) to provide high sensitivity. The VFC circuit is composed of one current mirror, one current multiplier, and voltage window comparators. The proposed VFC tracks the variations of the stored charge of a built-in capacitor. The voltage window comparator monitors the voltage of the capacitor to determine whether the output is pulled high or pulled down. The worth-case linear range of the output frequency of the proposed VFC is 0 to 55 MHz provided that the input voltage is 0 to 0.9 V. The error is less than 9% while the power dissipation is 0.218 mW. The second topic is to carry out a novel CMOS current-mode high- speed sense amplifier (SA). The proposed SA is composed by cascading a current-mode sense amplifier and a voltage-mode sense amplifier. The small input impedance of the current-mode amplifier alleviates the loading effect on the bitlines of SRAM cells such that the sensing speed is enhanced. The voltage-mode amplifier is responsible for boosting the logic levels to full swing. The worst access time of the proposed design is found to be less than 1.26 ns with a 1 pF load on outputs. The power dissipation is merely 0.835 mW at 793 MHz.

Electrochemical supercapacitors (ECs) attract significant attentions for their unique characteristics of high power density, good cycling capability and low cost. This dissertation will focus on fabrication of composite materials for electrodes and devices of ECs. A conceptually new colloidal approach to the fabrication of metal oxide – multiwalled carbon nanotube (MWCNT) composites is proposed. The heterocoagulation of positively charged oxide nanoparticles and negatively charged MWCNT allows the fabrication of advanced nanocomposites with improved dispersion of individual components. The proof-of-principle was demonstrated by the fabrication of MnO2-MWCNT electrodes for ECs with excellent performance. We proposed another novel concept based on electrostatic heterocoagulation of MnO2-MWCNT composites in aqueous environment. In this case, Benzyldimethylhexadecylammonium chloride (BAC) surfactant and caffeic acid (CA) were selected for adsorption and dispersion of MWCNT and MnO2, respectively, and this allowed the formation of stable aqueous suspensions of positively charged MWCNT and negatively charged MnO2. The asymmetric device showed high capacitance, high powerenergy characteristics with enlarged voltage window of 1.8 V, good capacitance retention at high charge-discharge rates and cyclic stability. A novel capacitive material BiMn2O5 was firstly discovered and synthesized for ECs applications in our studies. The BiMn2O5 nanocrystals were prepared by a hydrothermal method. We demonstrated for the first time that BiMn2O5 – MWCNT composite can be used as a new active material for positive electrodes of ECs. The composite electrode with high mass loading showed a capacitance of 6.0 F cm-2 (540 F cm-3) at a scan rate of 2 mV s-1 and excellent capacitive behavior at high scan rates. As-fabricated device showed good cyclic stability in a voltage window of 1.8 V with energy density of 13.0 Wh L-1 (9.0 Wh kg-1) and power density of 3.6 kW L-1 (2.5 kW kg-1). We firstly discovered that Poly[1-[4-(3-carboxy-4 hydroxyphenylazo)benzenesulfonamido]- 1,2-ethanediyl, sodium salt] (PAZO) can be used as an universal dispersant for various materials and its thin film fabricated by electrophoretic deposition (EPD) exhibited photo-induced birefringence. Our new findings indicated that PAZO is good candidate for diverse materials dispersing because it contains diaromatic monomers with salicylate ligands, which can provide multiple adsorption sites for efficient adsorption on particles and impart electrical charges to the particles. Additionally, the use of PAZO polymer offers the advantages of improved steric stabilization. We discovered that Celestine blue (CB) can be developed as an efficient dispersing agent for the nanoparticles. We found that CB includes a catechol ligand, which can provide CB adsorption on inorganic nanoparticles. The relatively large size of the CB molecules is beneficial for the electrosteric dispersion. The benefits of cathodic EPD for nanotechnology were demonstrated by the formation of nanostructured MnO2 films on commercial high surface area current collectors for energy storage in ECs. / Thesis / Doctor of Philosophy (PhD)