Οι συνεχώς αυξανόμενες ενεργειακές απαιτήσεις της σύγχρονης κοινωνίας σε συνδυασμό με τις ραγδαίες κλιματικές αλλαγές μας οδηγούν στην ανάγκη παραγωγής ηλεκτρικής ενέργειας με όσο το δυνατό πιο οικονομικό και φιλικό προς το περιβάλλον τρόπο. Έτσι, οι Ανανεώσιμες Πηγές Ενέργειας αποκτούν ολοένα και μεγαλύτερο μερίδιο στην παραγωγή ηλεκτρικής ενέργειας, αλλάζοντας συνεχώς τον παγκόσμιο ενεργειακό χάρτη. Τα αιολικά συστήματα, τα οποία αξιοποιούν την κινητική ενέργεια του ανέμου, είναι ένα είδος ΑΠΕ. Στην παρούσα εργασία μελετάμε ένα αιολικό σύστημα, το οποίο αποτελείται από μία ανεμογεννήτρια μεταβλητών στροφών που χρησιμοποιεί μία σύγχρονη μηχανή μόνιμου μαγνήτη, έναν μετατροπέα πηγής τάσης, ένα R-L φίλτρο στην πλευρά του δικτύου και μία γραμμή μεταφοράς μικρού μήκους. Η αυξημένη αξιοπιστία και απόδοση της ΣΜΜΜ την καθιστούν ιδιαίτερα ελκυστική λύση για τα αιολικά συστήματα. Στην εργασία αυτή προσομοιώνουμε σε περιβάλλον Matlab/Simulink το σύστημα που περιγράψαμε παραπάνω. Εφαρμόζοντας τις κατάλληλες τεχνικές ελέγχου από την πλευρά της μηχανής προσπαθούμε να πετύχουμε μέγιστη απομάστευση ισχύος από τον άνεμο, ενώ στην πλευρά του δικτύου προσπαθούμε μέσω άμεσου ελέγχου ροής ισχύος να πετύχουμε μοναδιαίο συντελεστή ισχύος με ταυτόχρονη ρύθμιση της τάσης της dc διασύνδεσης. Στη συνέχεια, μέσω ενός πρόσθετου ελέγχου προσπαθούμε να κρατήσουμε την τάση στην έξοδο του φίλτρου σταθερή, κατά τη διάρκεια πτώσης της τάσης του δικτύου. Τέλος, παραθέτουμε τα αποτελέσματα της προσομοίωσης μαζί με έναν σύντομο σχολιασμό και τα συμπεράσματα. / The continuously increasing energy requirements of modern society combined with the rapid climate changes lead us to the need to produce electrical energy in a more economic and environmentally friendly way. Thus, the Renewable Energy Sources gain an increasing share of electrical energy production, constantly changing the global energy map. Wind power systems, which utilize the kinetic energy of the wind, are a kind of RES. In this thesis we study a wind power system, which comprises a variable speed wind turbine, which uses a permanent magnet synchronous machine, a voltage source converter, an R-L filter in the grid side and a short transmission line. The increased reliability and performance of PMSG make it particularly attractive solution for wind power systems. In this thesis we simulate in Matlab/Simulink environment the system described above. Applying appropriate control techniques on the machine side we try to achieve maximum power harvesting from the wind, while on the grid side we try through direct power flow control to achieve unit power factor with simultaneous control of the dc link voltage. Then, using an additional control we try to keep constant the voltage at the end of the R-L filter during a grid voltage drop. Finally, we present the simulation results along with a brief commentary and the conclusions.

A new concept, the multi level voltage/current reinjection ac/dc conversion, is described in this thesis. Novel voltage and current source converter configurations, based on voltage and current reinjection concepts are proposed. These converter configurations are thoroughly analyzed in their ac and dc system sides. The fundamentals of the reinjection concept is discussed briefly, which lead to the derivation of the ideal reinjection waveform for complete harmonic cancellation and approximations for practical implementation. The concept of multi level voltage reinjection VSC is demonstrated through two types of configurations, based on standard 12-pulse parallel and series connected VSC modified with reinjection bridges and transformers. Firing control strategies and steady state waveform analysis are presented and verified by EMTDC simulations. The multi level current reinjection CSC is also described using two configurations based on standard 12-pulse parallel and series connected CSC modified with associated reinjection circuitry. Firing control strategies and steady state waveform analysis are presented and verified by EMTDC simulations. Taking the advantage of zero current switching in the main bridge valves, achieved through multi level current reinjection, an advanced multi level current reinjection scheme, consisting thyristor main bridges and self-commutated reinjection circuitry is proposed. This hybrid scheme effectively incorporates self-commutated capability into a conventional thyristor converter. The ability of the main bridge valves to commutate without the assistance of a turn-off pulse or line commutating voltage under the zero current condition is explained and verified by EMTDC simulations. Finally, the applications of the MLCR-CSC are discussed in terms of a back to back HVDC link and a long distance HVDC transmission system. The power and control structures and closed loop control strategies are presented. Dynamic simulation is carried out on PSCAD/EMTDC to demonstrate the two systems ability to respond to varying active and reactive power operating conditions.

The Diploma thesis deals with control of three-phase active rectifier and a three-phase DC/AC converter. It also explains phase-locked loop principle. The theoretical part including first three chapters lists several control approaches to three phase active rectifier and three phase DC/AC converter. Described control approaches to the active rectifier are control in dq frame and control in dq UVW frame. Listed control approaches to the DC/AC converter include cascaded control structure and a full state feedback control. The practical part is divided into last three chapters and includes mathematical description of phase-locked loop principle, model of active rectifier controlled in dq frame and a model of DC/AC converter controlled both by a cascaded control and a full¬ state feedback. The models are created in Matlab Simulink.

Variable renewable energy sources are today increasingly integrated in the power system as a step towards the renewable society. The large-scale introduction of converter-based energy sources brings challenges in terms of reduced damping to the power system due to the reduced number of synchronous generators. This can be manifested as high rate-of-change-of-frequency and decreased grid stability. To forestall this reduced performance, it is suggested that the grid-following control of today’s converters are restructured to a grid-forming control, enabling the converter to behave closer to a synchronous machine.   This thesis compares grid-following and grid-forming control and seeks to further describe this grid-forming behavior by applying a grid-forming control method on an energy storage enhanced STATCOM-system. A continuous time model and a linearized model based on state space representations are constructed in order to investigate the grid-forming behavior but also how the converter stability is affected by a restructure from grid-following to grid-forming control.   The results indicate that the investigated grid-forming control method displays a behavior similar to synchronous machines and incorporates the ability to provide frequency response services and so called “synthetic inertia” to the grid.  The results also show that the stability of the converter (the ability to provide a bounded output when the system is perturbed) is ensured when the control method is restructured from grid-following to grid-forming and that the investigated grid-forming method is stable also in weak grid situations.

This Master of Science thesis was written based on the shipbuilder Kockums AB feasibility study regarding the development of an All- Electric Ship for the Swedish Navy. The thesis was aiming at addressing voltage stability issues in a dc system fed by PWM rectifiers operating in parallel when supplying constant power loads. A basic computer model was developed for investigating the influence from various parameters on the system. It was shown that the voltage stability is dependent upon the ability to store energy in large capacitors. It was also shown that a voltage droop must be implemented maintaining load sharing within acceptable limits. Different cases of operation were modelled, faults were discussed, and the principal behaviour of the system during a short-circuit was investigated. It was shown that the short-circuit current is much more limited in this type of system in comparison to an ac system. It was concluded that more research and development regarding the components of the system must be performed.

The development of interconnected power systems together with an increasing number of renewable non-synchronous power sources, create major challenges for the power system to meet the voltage stability and power quality requirements. One way to increase the voltage stability in a sustainable way is to locally implement a STATCOM. By enhancing grid voltage stability under varying network conditions, the active power transfer capability will increase. However, before a STATCOM can be deployed in the power system, the behavior of it needs tobe investigated for the specific network conditions at the point of interface. The thesis develops a software model in RSCAD of a STATCOM along with important control functions for real-time simulations in RTDS without hardware-in-the-loop. The model aims to be sufficient for representing the gross behavior of a STATCOM in real-time simulations in order to get a quick overview of the dynamic response of the system. The model’s overall performance is evaluated through simulations in RTDS. The results indicate that the main control functions are operating in a stable and sufficient way. Hence, the model can perform in different operation modes as well as handling unbalances that are introduced in the system without losing controllability. There is potential for improvements in order to obtain a model with a more sophisticated control system. The main area would be to introduce limiters and anti-windups at appropriate places as well as a fault-ride-through logic to ensure a safe and stable operation during disturbances.

“High voltage direct current” (HVDC) teknologi har blivit allt viktigare teknik för att integrera förnybara energikällor i elnätet. För att styra ett sådant elsystem på bästa möjliga sätt krävs optimala kontrollstatergier både för omvandlarna och nätet. Så syftet med detta projekt är att undersöka hur olika regleringsmetoder, såsom centraliseradoch distribuerad spänningskontroll, kan påverka driften i ett 4-terminal HVDC-system. Ett optimalt effektflöde uppstår i systemet endast när likspänningen inte avviker från sitt börvärde och det uppnås genom att ha aktiv effekt regulator i varje nod i nätet. Olika scenarier som ändring av effektens börvärde och omvandlaravbrott har simulerats med hjälp av HIL-processen i realtid. Simuleringarna hjälper till att analysera hur väl dem implementerade regleringsmetoder i nodernas regulatorer hantera dessa förändringar. Resultatet ger bevis på att både centraliseradoch distruebued metoden har positiva och negativa aspekter. Fördelen med centraliserade metoden är att den ger en väldefinierad operationspunkt men den hanterar den inte svåra transienter (tex. avbrott) vilket distribuerade metoden gör.

To mitigate the carbon footprint and the need to fulfil the energy goals in terms of sustainability, it is required to deploy a large integration of green energies. Therefore, in the previous and the coming years, there will be a high research and technological interest in the high penetration of converter-based generation. With the replacement and integration of power converters into the bulk power grid, new challenges and issues must be faced to maintain the system´s stability and reliability in terms of procedures for the transmission system operators. The main objective of this thesis project is to analyze and to implement the current- limiting techniques implemented in voltage source converters, which are equipped with grid-forming functionalities so that these electronic devices are safeguarded during a severe transient event as three-phase short-circuit and remain connected to the grid during the fault scenario. The model of the voltage source converter with grid-forming strategies is described as well as the grid-forming strategies (droop control, virtual synchronous machine (VSM) and dispatchable virtual oscillator control (dVOC)) utilized in the outer loop. The low-inertia and zero-inertia system in the IEEE 9-Bus test system were exhibited to be resilient towards 3-phase fault events, and their behavior shows neither significant oscillations during and after the incident of the fault nor noticeable difference in their performance regarding the location. In this test system model, the current-limiting techniques were validated and analyzed results display good effectiveness for the current and frequency. The Hydro-Québec network model was employed to have a more practical approach in the behavior of the current limitation strategies in the power converters in a real power system. The fault location and the percentage of participation of the voltage source converters in the energy generation were the two main scenarios, in which the proposed control strategies for restricting the current work but simultaneously, it is required an appropriate control to keep the system´s stability. / För att minska koldioxidutsläppet och uppnå energimålen med avseende på hållbarhet krävs integrering av hållbara energikällor. Därmed, under de föregående och kommande  åren kommer stort fokus riktas mot forskning kring ökad penetration av kraftelektronikomriktare i kraftsystemet. När kraftelektronikomriktare ersätter traditionella generationsenheter uppkommer nya utmaningar och problem som behöver lösas för att upprätthålla systemets stabilitet och pålitlighet med avseende på tillvägagångssätt för systemansvariga för överföringssystemet.  Avhandlingens huvudmål är att analysera och implementera strömbegränsande metoder för kraftelektronikomriktare av typen voltage source converters med en nätformande (”grid- forming”) funktionalitet. Strömbegränsaren ska säkerställa att kraftelektronikomriktaren skyddas under allvarliga transienta händelser och att kraftelektronikomriktaren förblir ansluten till nätet under händelsen. Modellen av kraftelektronikomriktaren med nätformande egenskaper är beskrivna tillsammans med nätformande kontrollstrategier, virtuella synkronmaskniner (VSM) och användande av avsändande virtuell oscillerande kontroll i den yttre slingan.  Den låga trögheten och noll-tröghetssystemet i IEEE 9-Bus test-system visade sig vara motståndskraftig mot trefasfel eftersom testsystemets beteende visade varken signifikanta oscillationer under och efter felet eller märkbar förändring i dess prestanda beroende på var felet inträffade. I denna testsystemsmodell var strömbegränsande tekniker validerade och de analyserande resultaten visade på god effektivitet för strömmen och för frekvensen.  Hydro-Québec nätverks-modellen användes för att få en mer praktisk inriktning med hänsyn till beteendet hos strömbegränsarna där olika strategier har använts. Felpositionen och andelen av kraftelektronikomriktare i energigenereringen var två huvudsakliga scenarion, där de föreslagna kontrollstrategierna för att begränsa strömmen fungerade men kräver samtidigt att en lämplig kontroll för att behålla systemets stabilitet.

In order to meet the increasing demand ofenergy in today’s society while at the same time minimizing theenvironmental impact, renewable energy sources will be requiredto be integrated into the existing energy mix. Technologicaladvances in high voltage direct current (HVDC) grids playa crucial role in making this possible. Therefore the purposeof this project has been to validate the properties of basiccontrol strategies in terms of how they respond to four differentsimulation cases. All simulations have been conducted on asimplified version of the CIGR ́E B4 test grid, consisting offour monopolar HVDC converters. After analyzing the resultsobtained from each control strategy it became evident thatprovided if the benefits of the redundancy introduced by amulti-terminal grid are to be fully utilized, a distributed voltagecontrol should be used. Moreover, after substituting one ofthe four internal controllers with an external one, it becameclear that simply deciding the droop constants based on resultsfrom the simulation model wouldn’t be sufficient for real worldapplications. / För att möta det ökande energibehovet i dagens samhälle, samtidigt som energiproduktionens miljöpåverkan ska minimeras, krävs det att förnyelsebara energikällor integreras i den existerande energimixen. Tekniska framsteg inom högspända likströmsnät (HVDC) spelar en avgörande roll i att göra detta möjligt. Därför har syftet med detta projekt varit att validera egenskaperna hos grundläggande kontrollstrategier efter hur dem reagerar på fyra olika simuleringsfall. Alla simuleringar har genomförts på en förenklad version av CIGRE´ B4 testsystem, bestående av fyra monopolära HVDC omriktare. Efter att analyserat de erhållna resultaten från varje kontrollstrategi blev det uppenbart att om fördelarna med multiterminala elnät skulle uppnås, bör en distribuerad spänningskontroll användas. Dessutom, efter att ha bytt ut en av dem fyra interna kontrollerna med en extern, visade det sig att endast bestämma droppkonstanterna baserat på resultat från simuleringsmodellen inte är tillräckligt för verkliga applikationer. / Kandidatexjobb i elektroteknik 2020, KTH, Stockholm

The interaction of an HVDC converter with the connected power system is of complex nature. An accurate model of the converter is required to study these interactions. The use of analytical small-signal converter models provides useful insight and understanding of the interaction of the HVDC system and the connected system components. In this thesis analytical models of the HVDC converters are developed in the frequency-domain by calculating different transfer functions for small superimposed oscillations of voltage, current, and control signals. The objective is to study the dynamic proprieties of the combined AC-DC interaction and the interaction between different HVDC converters with small signal analysis. It is well known that the classical Bode/Nyquist/Nichols control theory provides a good tool for this purpose if transfer functions that thoroughly describe the 'plant' or the 'process' are available. Thus, there is a need for such a frequency-domain model. Experience and theoretical calculation have shown that voltage/power stability is a very important issue for an HVDC transmission link based on conventional line-commutated thyristor-controlled converters connected to an AC system with low short circuit capacity. The lower the short circuit capacity of the connected AC system as compared with the power rating of the HVDC converter, the more problems related to voltage/power stability are expected. Low-order harmonic resonance is another issue of concern when line-commutated HVDC converters are connected to a weak AC system. This resonance appears due to the presence of filters and shunt capacitors together with the AC network impedance. With a weak AC system connected to the HVDC converter, the system impedances interact through the converter and create resonances on both the AC- and DC-sides of the converter. In general, these resonance conditions may impose limitations on the design of the HVDC controllers. In order to improve the performance of the HVDC transmission system when it is connected to a weak AC system network, a reactive compensator with a voltage source converter has been closely connected to the inverter bus. In this thesis it is shown that the voltage source converter, with an appropriate control strategy, will behave like a rotating synchronous condenser and can be used in a similar way for the dynamic compensation of power transmission systems, providing voltage support and increasing the transient stability of the converter. / QC 20100708