The aim of this thesis is to develop a new building – a cultural and educational center, located in the town of Uherské Hradiště. The building is fitted to the central part of the city, on unused building lot, with good access to public transport links. The building is designed as a partial basement facility, with three floors and a basement. Structurally it is a column-based, skeletal support system, made of reinforced concrete. The basement part consists of bearing walls of reinforced concrete. The ceiling structure is made of locally backed, cross-reinforced slabs, also made of reinforced concrete. The outer perimeter infill masonry is constructed of ceramic bricks with a thickness of 300mm. Interior bearing walls are made of reinforced concrete of appropriate dimensions. Dividing walls are made of plasterboard constructions. Roof structures are formed by a system of flat roofs and terraces. In principle there are two types – the roofs with safety waterproofing and the ones without it. The base structure consists of footings and strips of reinforced concrete.

The main concern of this thesis work is the five-storey multifunction building. The house will consist of 22 residential units and one barrier-free apartment to which they belong cellar and two establishments. The building will have four above ground and one underground floor.

Diploma thesis is focused on the preparation of the implementation of the University Centre in Zlín. The work includes building technology study and subsequent construction technology project. In this thesis, the aim was to determine the time, financial and material demands of the project, choose the optimum process of construction, ensure BOZP, make the proposal buildingsite for the individual stages, the calculation of costs of site preparation and select adequate mechanical the assembly. It was drafted fire assessments of buildings.

Diploma thesis deals with the design of the multifunctional building located between Havlickova and F. Vogner streets in relation to the existing building in Litomyšl. Building plot is slightly sloping, at the rear goes into greater inclination. The building has four aboveground floors and one underground floor. The building includes services, located in ground floor, administrative premises decomposing in the second and third floor and apartments on the top floor. In the basement are located parking spaces. Supporting skeleton of the building is a cast-in-place concrete frame. Roofs are designed as a flat single shell. In part of roof over third floor is a green roof. The building is founded on piles. Due to the occurrence of water pressure is building an extra solved waterproofing system with checks and activation. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and specialization from concrete structures.

Increased moisture of masonry occurs mainly in older buildings. In some cases these problems arise even in new buildings. This issue should be properly treated and process of rehabilitation of the building must be executed. Humid walls can be treated by chemical injections, which is nowadays quite extensive and widely used method. Unlike mechanical methods humid walls in the implementation of chemical grouting does not need a major redesign and thus is friendly to the construction of the object. The main objective of this thesis is to establish a methodology for testing the injection materials, which will include a selection of ideal injection gel.

This diploma thesis focuses on the implementation of waterproofing of underground constructions using an LLDPE membrane hinged on anchors. In the future, this method will replace the commonly used waterproofing system in Scandinavia with extruded polyethylene foam. This method of tunnel construction and waterproofing is compared with the NRTM method, often used in Central Europe. The thesis describes the installation of a waterproofing system, especially materials, accessories, welding devices and auxiliary installation equipment. The main focus of the thesis is to verify the reliability of the individual types of welds and to assess the waterproofing system in terms of implementation and environmental demands.

The subject of the master´s thesis technological project of the Ivančice residential building in Ivančice. The building has one underground and four aboveground floors. The master´s thesis contains a technical report for the building technology project, broader transport routes, a timetable, a financial plan, time schedule, design of construction site installations, design of mechanical assemblies, technological prescription for construction of celling white tank, inspection and test plan, crane and design.

The aim of this diploma´s thesis is the construction and technological salutions to rough construction building municipal sports hall in Kuřim. The content of this work is technological execution, solution to site equipment, design of machanical assemblies sonnected with transport links, checking and test plans, line budget, schedule, calculation of construction, building timetable, safety and protection of enviroment.

This diploma thesis focuses on the implementation of waterproofing of underground constructions using an LLDPE membrane hinged on anchors. In the future, this method will replace the commonly used waterproofing system in Scandinavia with extruded polyethylene foam. This method of tunnel construction and waterproofing is compared with the NRTM method, often used in Central Europe. The thesis describes the installation of a waterproofing system, especially materials, accessories, welding devices and auxiliary installation equipment. The main focus of the thesis is to verify the reliability of the individual types of welds and to assess the waterproofing system in terms of implementation and environmental demands.

The main concern of this thesis is to design a five-storey multifunctional house. The house is divided into the main living area to which it belongs especially residential units accessible by stairs from the ground floor and also basement boxes and room for prams. On the ground floor are also located the individual garage, store room and technology. The house has four floors and a basement, the basement are located mass garages. The house has a sloping wooden roof trusses.