Zhang, Yin. / Thesis submitted in: December 2008. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2009. / Includes bibliographical references (leaves 56-60). / Abstracts in English and Chinese. / Chapter Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Telecommunications network hierarchy --- p.2 / Chapter 1.2 --- PON architectures for access networks --- p.4 / Chapter 1.2.1 --- TDM-PON --- p.5 / Chapter 1.2.2 --- WDM-PON --- p.7 / Chapter 1.3 --- Data delivery mode in WDM-PON --- p.8 / Chapter 1.3.1 --- Point-to-point --- p.8 / Chapter 1.3.2 --- Broadcast --- p.9 / Chapter 1.3.3 --- Multicast --- p.10 / Chapter 1.4 --- Motivation of this thesis --- p.10 / Chapter 1.5 --- Outline of this thesis --- p.13 / Chapter Chapter 2 --- Previous Multicast Architectures in WDM-PON --- p.14 / Chapter 2.1 --- Introduction --- p.15 / Chapter 2.2 --- Previous WDM-PON architectures with multicast capability --- p.15 / Chapter 2.2.1 --- Subcarrier multiplexing --- p.16 / Chapter 2.2.2 --- All-optical based multicast enabled architecture --- p.18 / Chapter 2.3 --- Summary --- p.21 / Chapter Chapter 3 --- A Multicast enabled WDM-PON Architecture Using ASK-DPSK Orthogonal Modulation --- p.23 / Chapter 3.1 --- Introduction --- p.24 / Chapter 3.2 --- System architecture --- p.25 / Chapter 3.3 --- Experimental Demonstration --- p.27 / Chapter 3.4 --- Discussion --- p.31 / Chapter 3.5 --- Summary --- p.36 / Chapter Chapter 4 --- A WG filtering and its suppression in quaternary ASK-DPSK based multicast enabled WDM-PON --- p.37 / Chapter 4.1 --- Introduction --- p.38 / Chapter 4.2 --- Principle of narrowband filtering --- p.38 / Chapter 4.3 --- Simulation model --- p.40 / Chapter 4.4 --- Simulation results and discussion --- p.42 / Chapter 4.4.1 --- Different extinction ratios --- p.43 / Chapter 4.4.2 --- Different AWG filter shape and bandwidth --- p.47 / Chapter 4.5 --- Summary --- p.50 / Chapter Chapter 5 --- Summary and Future Works --- p.51 / Chapter 5.1 --- Summary of the thesis --- p.52 / Chapter 5.2 --- Future works --- p.53 / List of Publications --- p.55 / BIBLIOGRAPHY --- p.56

Thesis (Ph. D.)--University of Hong Kong, 2006. / Title proper from title frame. Also available in printed format.

Thesis (Ph. D.)--University of Hong Kong, 2007. / Title from title frame. Also available in printed format.

Thesis (Ph.D.)--University of Nebraska-Lincoln, 2006. / Title from title screen (viewed Mar. 30, 2007). PDF text: vii, 83 p. : ill. (some col.) ; 0.44 Mb. UMI publication number: AAT 3225887. Includes bibliographical references. Also available in microfilm and microfiche formats.

The goal of the thesis is to fabricate the integrated asymmetric Mach-Zehnder Interferometer and optical waveguide ring resonator with simple fabrication process. 1.41£gm and 1.49£gm symmetric quantum well InGaAlAs epitaxial wafer is used to fabricate the devices. In the asymmetric Mach-Zehnder Interferometer , we design asymmetric straight waveguides with difference optical path differences £GL=480£gm, 970£gm, and 1900£gm. And asymmetric bend waveguides with curvature radius differences £GR=260£gm, 200£gm, 160£gm, and 100£gm. By this design, we can observe the interference variation of output light. In optical waveguide ring resonator design, we reduce the length of original K=0.15 Multi-Mode Interference (MMI) by stepped-width waveguide. By three-stepped width waveguide MMI design, it can be reduced 33.2% length. We obtain different transmission spectrum by adjusting the splitting ratio of MMI couplers (K=0.85, 0.5, and 0.15) and cascading doudle rings. We use a series of two ring resonators by MMI (K0=0.5,K1=0.15,K2=0.5) to get the FSR=50GHz. In fabrication process, we combined dry etching method with RIE-ICP and wet etching to get smooth sidewall and highly vertical waveguide. In measure , we get the FSR= 41.25 GHZ in throughput port in double ring filters . No signal in drop port was obserred due to material absorption, bending loss, and waveguide loss.

No description available.

No description available.

No description available.

The goal of this thesis is developing a two-color Ytterbium (Yb) fiber amplifier system that can be used for generation of mid-infrared radiation. Previously, our group reported generating 20 µW of average power, at a wavelength of 18µm. This was accomplished through the amplification of a two color-seed with peaks at 1040nm and 1110nm, through a two stage amplification without any compression. The mid-infrared radiation (MIR) was generated with a 4.5 ps pulse duration by the method of difference-frequency mixing, using 300 mW of average power from the two-color Yb-fiber amplifier. Because there was no limitation by two-photon absorption, MIR output power could be scaled by increasing the amplifier power. The current project aims to increase the peak power of the laser pulses to improve the efficiency of the nonlinear mixing. The two-colour seed is generated by continuum generation in a photonic crystal fibre, pumped by 200 mW of average power from a mode-locked Yb:fibre laser. In order to efficiently increase the energy of the two wavelengths, the 4.6 mW seed pulse is now pre-amplified up to 21 mW in a 2.7 m length single mode, single core Yb:fibre . The pre-amplifier used a double-ended pumping scheme with two single mode diode lasers at 976 nm each having 150 mW maximum pump power. A notch filter was placed in the output beam to eliminate any Amplified Spontaneous Emission. After further amplification in a 7 m length of double clad, Yb-fibre, a maximum average power of 727 mW was achieved for two colours peaked at 1035 nm and 1105 nm wavelengths. The pump power for this stage was 6 W. A grating stretcher is now used to select the two-colour input along with stretching the pulses. A three grating compressor is used to compress the output pulses to 466 fs pulse duration. After compression the average power of the two colours is 350 and 110 mW for wavelengths at 1035 and 1105nm, respectively. These higher power pulses are planned to be used to increase the mid-infrared generation efficiency.

The goal of this thesis is developing a two-color Ytterbium (Yb) fiber amplifier system that can be used for generation of mid-infrared radiation. Previously, our group reported generating 20 µW of average power, at a wavelength of 18µm. This was accomplished through the amplification of a two color-seed with peaks at 1040nm and 1110nm, through a two stage amplification without any compression. The mid-infrared radiation (MIR) was generated with a 4.5 ps pulse duration by the method of difference-frequency mixing, using 300 mW of average power from the two-color Yb-fiber amplifier. Because there was no limitation by two-photon absorption, MIR output power could be scaled by increasing the amplifier power. The current project aims to increase the peak power of the laser pulses to improve the efficiency of the nonlinear mixing. The two-colour seed is generated by continuum generation in a photonic crystal fibre, pumped by 200 mW of average power from a mode-locked Yb:fibre laser. In order to efficiently increase the energy of the two wavelengths, the 4.6 mW seed pulse is now pre-amplified up to 21 mW in a 2.7 m length single mode, single core Yb:fibre . The pre-amplifier used a double-ended pumping scheme with two single mode diode lasers at 976 nm each having 150 mW maximum pump power. A notch filter was placed in the output beam to eliminate any Amplified Spontaneous Emission. After further amplification in a 7 m length of double clad, Yb-fibre, a maximum average power of 727 mW was achieved for two colours peaked at 1035 nm and 1105 nm wavelengths. The pump power for this stage was 6 W. A grating stretcher is now used to select the two-colour input along with stretching the pulses. A three grating compressor is used to compress the output pulses to 466 fs pulse duration. After compression the average power of the two colours is 350 and 110 mW for wavelengths at 1035 and 1105nm, respectively. These higher power pulses are planned to be used to increase the mid-infrared generation efficiency.