Inorganic alternating current electroluminescent devices (AC-ELs) are known for their ruggedness and extreme long-term reliability, which is why they can often been found in industrial and medical equipment as well as in applications in the military sector. In contrast to the inorganic phosphors used in AC-ELs, organic materials offer a number of advantages, in particular a significantly higher efficiency, easier processibility, and a wide selection of emitter materials spanning the entire visible spectrum. Several efforts towards alternating current driven organic light-emitting devices have recently been made, however, important operating mechanism are still not well understood. In the first part of this theses, alternating current driven, capacitively coupled, pin-based organic light-emitting devices are investigated with respect to the influence of the thickness of the insulating layer and the intrinsic organic layer on the driving voltage. A three-capacitor model is employed to predict the basic behavior of the devices and good agreement with the experimental values is found. The proposed charge regeneration mechanism based on Zener tunneling is studied in terms of field strength across the intrinsic organic layers. A remarkable consistency between the measured field strength at the onset point of light emission (3–3.1 MV/cm) and the theoretically predicted breakdown field strength of around 3 MV/cm is obtained. The latter value represents the field required for Zener tunneling in wide band gap organic materials according to Fowler-Nordheim theory. In a second step, asymmetric driving of capacitively coupled OLEDs is investigated. It is found that different voltages and/or pulse lengths for positive and negative half-cycle lead to significant improvements in terms of brightness and device efficiency. Part two of this work demonstrates a device concept for highly efficient organic light-emitting devices whose emission color can be easily adjusted from, e.g., deep-blue through cold-white and warm-white to saturated yellow. The presented approach exploits the different polarities of the positive and negative half-cycles of an alternating current driving signal to independently address a fluorescent blue emission unit and a phosphorescent yellow emission unit vertically stacked on top of each other. The electrode design is optimized for simple fabrication and driving and allows for two-terminal operation by a single source. The presented approach for color-tunable OLEDs is versatile in terms of emitter combinations and meets application requirements by providing a high device efficiency of 36.2 lm/W, a color rendering index of 82 at application relevant brightness levels of 1000 cd/m², and warm-white emission color coordinates. The final part demonstrates an approach for full-color OLED pixels that are fabricated by vertical stacking of a red-, green-, and blue-emitting unit. Each unit can be addressed separately which allows to efficiently generate every color that is a superposition of spectra of the individual emission units. The device is built in a top-emission geometrywhich is highly desirable for display fabrication as the pixel can be directly deposited onto the back-plane electronics. Furthermore, the presented device design requires only three independently addressable electrodes which simplifies fabrication and electrical driving. The electrical performance of each individual unit is on par with standard pin single emission unit OLEDs, showing very low leakage currents and achieving high brightness levels at moderate voltages of around 3–4 V.

Inorganic alternating current electroluminescent devices (AC-ELs) are known for their ruggedness and extreme long-term reliability, which is why they can often been found in industrial and medical equipment as well as in applications in the military sector. In contrast to the inorganic phosphors used in AC-ELs, organic materials offer a number of advantages, in particular a significantly higher efficiency, easier processibility, and a wide selection of emitter materials spanning the entire visible spectrum. Several efforts towards alternating current driven organic light-emitting devices have recently been made, however, important operating mechanism are still not well understood. In the first part of this theses, alternating current driven, capacitively coupled, pin-based organic light-emitting devices are investigated with respect to the influence of the thickness of the insulating layer and the intrinsic organic layer on the driving voltage. A three-capacitor model is employed to predict the basic behavior of the devices and good agreement with the experimental values is found. The proposed charge regeneration mechanism based on Zener tunneling is studied in terms of field strength across the intrinsic organic layers. A remarkable consistency between the measured field strength at the onset point of light emission (3–3.1 MV/cm) and the theoretically predicted breakdown field strength of around 3 MV/cm is obtained. The latter value represents the field required for Zener tunneling in wide band gap organic materials according to Fowler-Nordheim theory. In a second step, asymmetric driving of capacitively coupled OLEDs is investigated. It is found that different voltages and/or pulse lengths for positive and negative half-cycle lead to significant improvements in terms of brightness and device efficiency. Part two of this work demonstrates a device concept for highly efficient organic light-emitting devices whose emission color can be easily adjusted from, e.g., deep-blue through cold-white and warm-white to saturated yellow. The presented approach exploits the different polarities of the positive and negative half-cycles of an alternating current driving signal to independently address a fluorescent blue emission unit and a phosphorescent yellow emission unit vertically stacked on top of each other. The electrode design is optimized for simple fabrication and driving and allows for two-terminal operation by a single source. The presented approach for color-tunable OLEDs is versatile in terms of emitter combinations and meets application requirements by providing a high device efficiency of 36.2 lm/W, a color rendering index of 82 at application relevant brightness levels of 1000 cd/m², and warm-white emission color coordinates. The final part demonstrates an approach for full-color OLED pixels that are fabricated by vertical stacking of a red-, green-, and blue-emitting unit. Each unit can be addressed separately which allows to efficiently generate every color that is a superposition of spectra of the individual emission units. The device is built in a top-emission geometrywhich is highly desirable for display fabrication as the pixel can be directly deposited onto the back-plane electronics. Furthermore, the presented device design requires only three independently addressable electrodes which simplifies fabrication and electrical driving. The electrical performance of each individual unit is on par with standard pin single emission unit OLEDs, showing very low leakage currents and achieving high brightness levels at moderate voltages of around 3–4 V.