Digitized by Kansas Correctional Industries

This item was digitized as part of the Million Books Project led by Carnegie Mellon University and supported by grants from the National Science Foundation (NSF). Cornell University coordinated the participation of land-grant and agricultural libraries in providing historical agricultural information for the digitization project; the University of Arizona Libraries, the College of Agriculture and Life Sciences, and the Office of Arid Lands Studies collaborated in the selection and provision of material for the digitization project.

Bibliography: leaves 247-268. A series of laboratory, greenhouse and field experiments were conducted to investigate aspects of seed quality in a range of bread wheat genotypes important in South Australia as well as a durum cultivar, Yallaroi. It was concluded that sound healthy seed does vary in quality and this affects seedling vigour, crop establishment and grain yield. Seed source can affect genotype performance in evaluation trials. There is genetic variability for embryo size, coleoptile length, nutrient efficiency and nutrient loading in to the seed which can be exploited by breeders. Agronomically, seed quality can be improved by managing seed crops to aid accumulation of mineral nutrients in the seed and then selecting, by grading, only large seed for sowing.

This investigation was concerned with determining the interaction of microwaves with germinating seeds. This study covers two different approaches. The preliminary efforts covered the response of germinating seeds to treatment by microwaves and heat. The second phase of the investigation used microwaves as a probe to determine some of the processes of early seed germination. The preliminary investigation measured the internal metabolic process by ATP production. Leakage of ions and organic material from germinating seeds indicated that membranes are a target of microwaves and heat. Electron photo-micrographs showed an increase in damage to membranes as heat and microwave treatments were increased. The second phase of this investigation was concerned with determining some of the biological activity at the initiation of germination of wheat seeds, Triticum aestivum L., using a resonating microwave cavity oscillating at 9.3 GHz as a probe. Direct current conductivity measurements were also made on the seeds as a means of confirming the observations made with the microwave cavity. There was no observable difference between treatment by UHF or heat in the ultrastructure of germinating seeds. A dielectric response far above that of free water was found as live seeds of wheat began to imbibe water. This effect was assumed to be due to the release of ions, because conductivity increased as corresponding quantities of water were imbibed; and both conductivity and dielectric response decreased as imbibition progressed. Although dead seeds also imbibe water, they do not show this decrease in dielectric response. The dielectric response of live seeds was reduced after the initial imbibition, showing that water became tightly bound as imbibition progressed. The dielectric response of actively growing shoots from the seeds was much less than that of the seeds themselves. The large quantity of water in the shoots is assumed to be immobile, being tightly bound within the membranes, enzymes, and organelles.

Bibliography: leaves 155-182. Most agricultural crop seeds are 'orthodox' ie. desiccation is a necessary feature of their complete life cycle. Low moisture content lengthens the storage life of orthodox seeds. Recalcitrant seeds, which do not tolerate low moisture content, lose viability in dry storage. The thesis studies the role of sugars in desiccation tolerance in developing seeds and investigates other mechanisms which might be involved in desiccation tolerance and desiccation sensitivity.

Bibliography: leaves 155-182. / xiv, 182, [10] leaves, [11] leaves of plates : ill. (some col.) ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / Most agricultural crop seeds are 'orthodox' ie. desiccation is a necessary feature of their complete life cycle. Low moisture content lengthens the storage life of orthodox seeds. Recalcitrant seeds, which do not tolerate low moisture content, lose viability in dry storage. The thesis studies the role of sugars in desiccation tolerance in developing seeds and investigates other mechanisms which might be involved in desiccation tolerance and desiccation sensitivity. / Thesis (Ph.D.)--University of Adelaide, Dept. of Plant Science, 1996?

The effect of drying corn, rice and wheat seed in two stages was studied, using germinability as a measure of quality. For the first stage, fluidised bed dryer (FBD) and spouted bed dryer (SBD) were used to dry seed from 20-25%wb to 18%wb while in-store dryer (ISO) was used in the second stage for drying from 18%wb to below 14%wb. The drying air temperature range of 40-80??C was studied for the first stage while 18-30??C and relative humidity 60-70% were for the second stage. It was found that dryer type, drying temperature, initial moisture content of seeds and drying time had significant effects on the seed germination. From the result, the drying air temperature of 40??C was safe for corn and rice in FBD while 60??C was acceptable for wheat. In SBD, the 40??C was the maximum drying temperature for rice and wheat without quality deterioration. Meanwhile the second stage drying in an ISD under all specified conditions was safe. In this work, the thin-layer drying models were developed. The results showed that the modified Page's model and modified two-compartment model were the best-fitted models with the root mean square (RMS) of the differences between the predicted moisture ratio and the measured values below 0.03. Besides, the existing ISD simulation program provided the RMS of 0.3, 1.1, and 0.9%wb for corn, rice and wheat respectively. The germination models for FBD and SBD were also developed. As a result, the modified Giner's models 1&2 were the best-fitted models for FBD with the RMS of the differences between predicted and measured germination percentages of 7.9, 4.2 and 3.4% for corn, rice and wheat while the modified Giner's models 2&3 were for SBD with the RMS of 5.5 and 6.1% for rice and wheat respectively. The comparison between FBD and SBD revealed that FBD had faster drying rate while SBD consumed less energy. Ultimately, the energy cost analysis showed that single-stage drying in a fixed bed dryer using ambient condition consumed less energy than two-stage drying using a FBD and ISD but lower energy cost must be weighed against the faster drying rate, flexibility, portable design, and product uniformity of FBD.

Although radio-frequency (RF) methods have been used for decades in many heating and drying processes, there is still a need for more engineering design data related to the design of the applicators and the performance of these systems before costly prototypes are built. Energy, temperature, and the effect produced by the high frequency field parameters on biological materials need to be examined with regard to their effects on the resulting processing requirements. / Wheat-seed infection by a fungus such as Fusarium graminearum can considerably lower the seed germination and the quality of the harvest. A study was thus conducted to determine the combined effect of different levels of RF power, temperature, and moisture content on the quality of seed-grade wheat and fungus inactivation. Similar treatment combinations were studied with seed-grade soybean in view on improving germination. With higher power, higher temperature (90°C) and higher moisture content (14%), the fungus mortality significantly increased, with a fungal vigour of less than 0.1, and the germination quality of the seeds decreased to a germination vigour below 0.3. For soybean seeds, only treatments of low RF intensity (60°C) were successful in improving germination vigour especially at lowest moisture content typically found in stored seeds. / RF treated wheat was studied to identify the relationship between heating conditions and grain quality categorized in terms of kernel viability and structural damage. / The potential of an RF thermal treatment to improve and extend the storability of vacuum packaged carrot sticks was investigated. The results have shown that it is possible to treat carrot sticks to 60°C in less than 2 min to reduce the initial microbial load. The RF-treatments maintained colour, the vacuum of the packages, and the excellent taste of the carrot sticks. / RF heating was studied for the pasteurization of prepared samples of ham. The ham samples were brought to internal temperatures of 75 and 85°C, by RF heating with a 10 min residence time. The study indicates that radio-frequency heating can improve the storability of re-packed hams by reducing the bacterial load, reducing moisture loss during storage and maintaining an overall greater product quality. (Abstract shortened by UMI.)

The effect of drying corn, rice and wheat seed in two stages was studied, using germinability as a measure of quality. For the first stage, fluidised bed dryer (FBD) and spouted bed dryer (SBD) were used to dry seed from 20-25%wb to 18%wb while in-store dryer (ISO) was used in the second stage for drying from 18%wb to below 14%wb. The drying air temperature range of 40-80??C was studied for the first stage while 18-30??C and relative humidity 60-70% were for the second stage. It was found that dryer type, drying temperature, initial moisture content of seeds and drying time had significant effects on the seed germination. From the result, the drying air temperature of 40??C was safe for corn and rice in FBD while 60??C was acceptable for wheat. In SBD, the 40??C was the maximum drying temperature for rice and wheat without quality deterioration. Meanwhile the second stage drying in an ISD under all specified conditions was safe. In this work, the thin-layer drying models were developed. The results showed that the modified Page's model and modified two-compartment model were the best-fitted models with the root mean square (RMS) of the differences between the predicted moisture ratio and the measured values below 0.03. Besides, the existing ISD simulation program provided the RMS of 0.3, 1.1, and 0.9%wb for corn, rice and wheat respectively. The germination models for FBD and SBD were also developed. As a result, the modified Giner's models 1&2 were the best-fitted models for FBD with the RMS of the differences between predicted and measured germination percentages of 7.9, 4.2 and 3.4% for corn, rice and wheat while the modified Giner's models 2&3 were for SBD with the RMS of 5.5 and 6.1% for rice and wheat respectively. The comparison between FBD and SBD revealed that FBD had faster drying rate while SBD consumed less energy. Ultimately, the energy cost analysis showed that single-stage drying in a fixed bed dryer using ambient condition consumed less energy than two-stage drying using a FBD and ISD but lower energy cost must be weighed against the faster drying rate, flexibility, portable design, and product uniformity of FBD.

No description available.