Thesis (Ph. D.)--Worcester Polytechnic Institute. / Keywords: Playout buffer; rate selection; streaming multimedia; wireless networks; bandwith estimation. Includes bibliographical references (leaves 187-202).

A wireless sensor network (WSN) is comprised of a few hundred or thousand au-tonomous sensor nodes spatially distributed over a particular region. Each sensornode is equipped with a wireless communication device, a small microprocessor, anda battery-powered energy source. Typically, the applications of WSNs such as habitatmonitoring, re detection, and military surveillance, require data collection, process-ing, and transmission among the sensor nodes. Due to their energy constraints andhostile environments, the main challenge in the research of WSN lies in prolongingthe lifetime of WSNs.In this dissertation, we present four dierent topology management protocols forK-coverage and load balancing to prolong the lifetime of WSNs.First, we present a Randomly Ordered Activation and Layering (ROAL) protocolfor K-coverage in a stationary WSN. The ROAL suggests a new model of layer cov-erage that can construct a K-covered WSN using the layer information received fromits previously activated nodes in the sensing distance. Second, we enhance the faulttolerance of layer coverage through a Circulation-ROAL (C-ROAL) protocol. Us-ing the layer number, the C-ROAL can activate each node in a round-robin fashionduring a predened period while conserving reconguration energy. Next, MobilityResilient Coverage Control (MRCC) is presented to assure K-coverage in the presence of mobility, in which a more practical and reliable model for K-coverage with nodalmobility is introduced. Finally, we present a Multiple-Connected Dominating Set(MCDS) protocol that can balance the network trac using an on-demand routingprotocol. The MCDS protocol constructs and manages multiple backbone networks,each of which is constructed with a connected dominating set (CDS) to ensure a con-nected backbone network. We describe each protocol, and compare the performanceof our protocols with Dynamic Source Routing (DSR) and/or existing K-coveragealgorithms through extensive simulations.The simulation results obtained by the ROAL protocol show that K-coverage canbe guaranteed with more than 95% coverage ratio, and signicantly extend networklifetime against a given WSN. We also observe that the C-ROAL protocol provides abetter reconguration method, which consumes only less than 1% of the recongura-tion energy in the ROAL protocol, with a greatly reduced packet latency. The MRCCprotocol, considering the mobility, achieves better coverage by 1.4% with 22% feweractive sensors than that of an existing coverage protocol for the mobility. The resultson the MCDS protocol show that the energy depletion ratio of nodes is decreasedconsequently, while the network throughput is improved by 35%.

In recent years, transmission of video over the Internet has become an important application. As wireless networks are becoming increasingly popular, it is expected that video will be an important application over wireless networks as well. Unlike wired networks, wireless networks have high data loss rates. Streaming video in the presence of high data loss can be a challenge because it results in errors in the video.<p>Video applications produce large amounts of data that need to be compressed for efficient storage and transmission. Video encoders compress data into dependent frames and independent frames. During transmission, the compressed video may lose some data. Depending on where the packet loss occurs in the video, the error can propagate for a long time. If the error occurs on a reference frame at the beginning of the video, all the frames that depend on the reference frame will not be decoded successfully. <p>This thesis presents the concept of mixed streaming, which reduces the impact of video propagation errors in error prone networks. Mixed streaming delivers a video file using two levels of reliability; reliable and unreliable. This allows sensitive parts of the video to be delivered reliably while less sensitive areas of the video are transmitted unreliably. Experiments are conducted that study the behavior of mixed streaming over error prone wireless networks. Results show that mixed streaming makes it possible to reduce the impact of errors by making sure that errors on reference frames are corrected. Correcting errors on reference frames limits the time for which errors can propagate, thereby improving the video quality. Results also show that the delay cost associated with the mixed streaming approach is reasonable for fairly high packet loss rates.

User demand for seamless connectivity has encouraged the development of alternatives to traditional communications infrastructure networks. Potential solutions have to be low-cost, easily deployable and adaptive to the environment. One approach that has gained tremendous attention over the past few years is the deployment of a backbone of access points wirelessly interconnected, allowing users to access the wired infrastructure via wireless multi-hop communication. Wireless Mesh Networks (WMN) fall into this category and constitute a technology that could revolutionize the way wireless network access is provided. However, limited transfer capacity and interference resulting from the shared nature of the transmission medium will prevent widespread deployment if the network performance does not meet users' expectations. It is therefore imperative to provide efficient mechanisms for such networks. Resource management encompasses a number of different issues, including routing. Although a profusion of routing mechanisms have been proposed for other wireless technologies, the unique characteristics of WMNs (i.e. fixed wireless backbone, with the possibility to embed multiple interfaces) prevent their straight forward adoption in WMNs. Moreover, the severe performance degradations that can result from the interference generated by concurrent data transmissions and environmental noise call for the development of interference-aware routing mechanisms. In this thesis, we investigated the impact of interference on the network performance of wireless mesh networks. We designed algorithms to associate routers to gateways that minimize the interference level in single-channel and multi-channel networks. We then studied the performance of existing routing metrics and their suitability for mesh networks. As a result of this analysis, we designed a novel routing metric and showed its benefits over existing ones. Finally, we provided an analytical evaluation of the probability of finding two non interfering paths given a network topology.

Today's communication solution between the vehicle and trailer is one many see as a non-viable solution, then breakdowns on both the lights and cables are common. Now, a new innovation enters the market, a system that can transmit wireless control signals between the vehicle and trailer. Parvus and Zap, the two solutions that the projekt group has come up with during this thesis work carried out over the last year on Utvecklingsingenjörsprogrammet. Technologists Peter Jägevall and Christopher Åberg has developed this project on their own. The group has developed various concepts and chosen to work on, two of them. The project has resulted in this report and a prototype The solution that the group has developed is a wireless communication between vehicle and trailer. The project team has developed new power-efficient LED lighting fixtures in order to implement an internal power source in the trailer. The result of this has become a maintenance-free and wireless product to trailers. The vision is that you in the near future will see this product on the Swedish roads.

The importance of monitoring physical and environmental conditions increases day by day and, therefore, so is the necessity of having a reliable wireless sensor network (WSN). The need to overcome challenges in WSN deployment and operation arises due to WSN's nature and characteristics such as possible nodes' mobility, limited radio and processing power, available storage and physical effects of the environment (particularly harsh environments) and balancing energy consumption has motivated us to investigate solutions to those problems. By studying related work, it was possible to observe that techniques such as the use of a good link estimator and the deployment of a suitable topology are essential features for a WSN. The core idea is to capture link connectivity dynamically and use it on routing decisions to gain reliability and estimate the whole network connectivity. The three main steps for deployment of a reliable WSN are the following: -         Link estimator -         Routing and neighbor information -         Suitable routing algorithms In addition, self-organization is an important capability that WSNs need to present. They should be reliable, scalable and energy efficient during the network lifetime and self-organization plays a key role in this context. Summing up all these aspects, it comes to the point that reliable connectivity is an important characteristic of a WSN. The goal of this work is to contribute with the research in the subject by means of implementing a suitable topology management and evaluating the network connectivity by the means of quantitative metric for the network as whole. Practical experiments results are presented and discussed.

The purpose of the project was to develop the hardware to a microwave wireless system working at the frequency 2.45 GHz. The functionality of the system should also be easy to understand since the system is to be used in an educational purpose. Much time has been spent impedance matching components, a task that proved to be harder than we expected. Other work that has been is layout of all parts, filter construction and the writing of an easy to understand thesis. After the parts had been completed, they were tested in a network analyzer and/or spectrum analyzer. Successful full system test has been done up to 400 meters, the length the system is to be used for.

In the recent past, wireless sensor networks have been introduced to use in many applications. To design the networks, the factors needed to be considered are the coverage area, mobility, power consumption, communication capabilities etc. The challenging goal of our project is to create a simulator to support the wireless sensor network simulation. The network simulator (NS-2) which supports both wire and wireless networks is implemented to be used with the wireless sensor network. This implementation adds the sensor network classes which are environment, sensor agent and sensor application classes and modifies the existing classes of wireless network in NS- 2. This NS-2 based simulator is used to test routing protocols – Destination-Sequenced Distance Vector (DSDV), and Ad-Hoc On-Demand Distance Vector (AODV) as one part of simulations. Finally, the sensor network application models and the extension methods of this NS-2 based simulator for simulations in specific wireless sensor network applications are proposed.

User demand for seamless connectivity has encouraged the development of alternatives to traditional communications infrastructure networks. Potential solutions have to be low-cost, easily deployable and adaptive to the environment. One approach that has gained tremendous attention over the past few years is the deployment of a backbone of access points wirelessly interconnected, allowing users to access the wired infrastructure via wireless multi-hop communication. Wireless Mesh Networks (WMN) fall into this category and constitute a technology that could revolutionize the way wireless network access is provided. However, limited transfer capacity and interference resulting from the shared nature of the transmission medium will prevent widespread deployment if the network performance does not meet users' expectations. It is therefore imperative to provide efficient mechanisms for such networks. Resource management encompasses a number of different issues, including routing. Although a profusion of routing mechanisms have been proposed for other wireless technologies, the unique characteristics of WMNs (i.e. fixed wireless backbone, with the possibility to embed multiple interfaces) prevent their straight forward adoption in WMNs. Moreover, the severe performance degradations that can result from the interference generated by concurrent data transmissions and environmental noise call for the development of interference-aware routing mechanisms. In this thesis, we investigated the impact of interference on the network performance of wireless mesh networks. We designed algorithms to associate routers to gateways that minimize the interference level in single-channel and multi-channel networks. We then studied the performance of existing routing metrics and their suitability for mesh networks. As a result of this analysis, we designed a novel routing metric and showed its benefits over existing ones. Finally, we provided an analytical evaluation of the probability of finding two non interfering paths given a network topology.

In recent years, transmission of video over the Internet has become an important application. As wireless networks are becoming increasingly popular, it is expected that video will be an important application over wireless networks as well. Unlike wired networks, wireless networks have high data loss rates. Streaming video in the presence of high data loss can be a challenge because it results in errors in the video.<p>Video applications produce large amounts of data that need to be compressed for efficient storage and transmission. Video encoders compress data into dependent frames and independent frames. During transmission, the compressed video may lose some data. Depending on where the packet loss occurs in the video, the error can propagate for a long time. If the error occurs on a reference frame at the beginning of the video, all the frames that depend on the reference frame will not be decoded successfully. <p>This thesis presents the concept of mixed streaming, which reduces the impact of video propagation errors in error prone networks. Mixed streaming delivers a video file using two levels of reliability; reliable and unreliable. This allows sensitive parts of the video to be delivered reliably while less sensitive areas of the video are transmitted unreliably. Experiments are conducted that study the behavior of mixed streaming over error prone wireless networks. Results show that mixed streaming makes it possible to reduce the impact of errors by making sure that errors on reference frames are corrected. Correcting errors on reference frames limits the time for which errors can propagate, thereby improving the video quality. Results also show that the delay cost associated with the mixed streaming approach is reasonable for fairly high packet loss rates.