Return to search

[en] NUMERICAL FINITE ELEMENT ANALYSIS OF RESIDUAL STRESSES GENERATED BY TREATED PHASE CHANGES IN THERMICALLY STELLS / [pt] ANÁLISE NUMÉRICA POR ELEMENTOS FINITOS DE TENSÕES RESIDUAIS GERADAS POR MUDANÇA DE FASE EM AÇOS TRATADOS TERMICAMENTE

[pt] O objetivo deste trabalho é fazer uma modelagem numérica
por elementos finitos de tensões residuais em peças de liga
ferro-níquel e aço carbono submetidas a tratamentos
térmicos,considerando mudanças de fase.Com este objetivo,
foram desenvolvidos códigos computacionais orientados a
objetos para análise térmica não-linear acoplado à análise
da micro-estrutura. Códigos implementados em POO também
foram criados para análise elasto-plástica, onde a
distribuição de temperatura e as frações parciais dos
constituintes são dados de entrada. As propriedades termo-
mecânicas do material são consideradas dependentes tanto da
temperatura quanto da fração parcial de cada constituinte.
No tratamento térmico está sendo considerado a formação de
martensita segundo o esquema de Koistinen e Marburger
(1959). É abordado também a formação difusional de perlita
e bainita, segundo o esquema proposto por Avrami (1939).
Por fim, é apresentado um novo modelo para calcular os
parâmetros cinéticos das transformações difusionais
austenita-perlita e austenita-bainita. / [en] The objective of this thesis is to perform a finite element
analysis of residual stress in Fe-Ni alloys and carbon
steel heat-treated pieces, considering phase changes.
To achieve this goal, a object oriented computer code for
the non-linear thermal analysis coupled with a code for a
micro-structural analysis were developed. OPP codes were
also created for an elasto-plastic analysis, with
temperature distribution and constituents partial fraction
as input data. The material properties are considered
dependent on both the temperature and the partial fraction
for all analyses.In the thermal treatment, the martensite
transformation according to Koistinen and Marburger (1959)
scheme and the diffusional formation of pearlite and
bainite according to Avrami (1939) are considered.
Finally, a new model to calculate the kinetics parameters
of the diffusional austenite-pearlite and austenite-bainite
transformations is presented.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:2635
Date20 May 2002
CreatorsMARCELLO GOULART TEIXEIRA
ContributorsLUIZ ELOY VAZ, LUIZ ELOY VAZ, LUIZ ELOY VAZ
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguagePortuguese
TypeTEXTO

Page generated in 0.0023 seconds