Return to search

[en] STATIC AND DYNAMIC SIMULATION FOR GENERATOR VOLTAGE CONTROL / [pt] SIMULAÇÃO ESTÁTICA E DINÂMICA DO CONTROLE DE TENSÃO POR GERADORES

[pt] O problema tratado nesta dissertação é a relação oposta
entre a tensão de
excitação de geradores e compensadores síncronos e a tensão
controlada,
quando o sistema de transmissão da área encontra-se muito
carregado. Neste
caso, a capacidade nominal de um gerador / compensador não
seria útil para
manter a tensão controlada. Devido à relação oposta, uma
maior excitação da
máquina iria abaixar a tensão controlada. O controle
automático iria continuar
agindo, abaixando ainda mais a tensão. Este mecanismo pode
levar o sistema
ao colapso e foi verificado em ponto de operação real do
sistema brasileiro. Esse
fenômeno ocorre quando a injeção de potência na rede de
transmissão ou
distribuição é elevada. Com o advento da geração
distribuída, co-geração e
produtores independentes, usualmente conectados à rede
existente em níveis de
tensão mais baixas, têm-se observado ocorrências do
fenômeno. O objetivo do
trabalho é então entender melhor as situações operativas
reais que levam à
ocorrência do fenômeno, principalmente quando existem
vários equipamentos de
controle de tensão ao redor do gerador em análise. A
abordagem do problema
baseou-se na verificação do comportamento do gerador /
compensador como
dispositivo de controle de tensão, no domínio do tempo e em
regime
permanente. Avaliaram-se as ações de controle do mesmo a
partir de sete tipos
de análise distintas para pontos de operação na região
normal e anormal da
curva SV. A real existência do fenômeno foi comprovada
através de algumas
destas análises. Porém, conclui-se que nem todas as formas
de análise no
domínio do tempo fazem uma avaliação completa do fenômeno.
Dentre essas,
estão a análise dinâmica agregada e a análise dinâmica
agregada sob influência
dos equipamentos de controle de tensão, que para pontos de
operação na
região anormal da curva SV não responderam em concordância
com os outros
tipos de análise. / [en] The problem addressed in this research is the opposite
relationship
between the , synchronous generator / compensator
excitation voltage and the
controlled voltage when nearby network is heavily loaded.
In this situation, the
nominal capacity of a generator / compensator would not
keep the voltage
controlled. Due to the opposite relationship, the higher
the excitation voltage the
lower is the controlled voltage. So, the automatic control
would continue acting
lowering the voltage. This mechanism, verified in a real
operational point of the
Brazilian Electric System, can lead the system to collapse.
This phenomenon
occurs when the power injection into the network is high.
It is prone to occur in
the new scenario of distributed generation connected to
already existing low
voltage networks. The objective of this work is to
understand the actual operative
situations that lead to the occurrence of the phenomenon,
mainly when there are
several voltage control devices nearby the generator. The
analysis of the problem
was based on the verification of the generator behaviour as
a voltage control
device, in time domain simulation and in steady state. The
control actions were
evaluated from seven different ways for operating points in
the normal and the
abnormal region of the SV curve. The actual existence of
the phenomenon was
proven through some of these analyses. However, some of the
time domain
simulations did not evaluated the phenomenon completely.
Among them, the
aggregated dynamic analysis and the aggregated dynamic
analysis under
influence of other voltage control devices have not got the
expected
responses for the abnormal region of the SV curve, in
comparison with other
analysis.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:9454
Date09 January 2007
CreatorsLUIS FERNANDO FERREIRA
ContributorsRICARDO BERNARDO PRADA
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguagePortuguese
TypeTEXTO

Page generated in 0.0023 seconds