In this study the breakage mechanics of brittle glass marbles was investigated. The pro-cess was to firstly investigate them in laboratory environment. The marbles or specimens was loaded until a crushing breakage occurred in a single point load test called Single Sphere Point load test in this document. From the test we could derive the crushing load, the deformation and strain, the tensile strength and other parameters needed for the second part of this work. Namely the numerical modelling, here we investigated the specimen with the Discrete Element method or DEM for shorts. The software used was an open sourced software created in MATLAB called DICE2D. Since the software was developed to only include the mathematical part of the numerical model several re-coding processes were needed, with other words the creation of add-ons to the software. The add-ons were automatic code created in Python where the user now are able to create a geometrical model for the specimen that the software can interpret. There were two add-ons created in order to generate a geometry, called the circumference method and the random generation method, i.e. different methods of creating a geometry. The first method, the circumference method creates circumferences filled with smaller particles with the same radii, then moves a step inward to the specimens center and fills another circumference until the center is reached. The second method, the random method generates particles positioned randomly inside the specimen with a random radii, created such that the radius of the particles is chosen with an interval, were the user can choose the smallest and the largest particle radius. It was found that both these add-ons were of great use with different purposes in mind. The circumference method was able to create a brittle material where the deformations were low. The random method also created a brittle material but since the particles were randomly positioned there also was empty space created such that the deformations were larger than the one found in the laboratory environment, since the empty space between the particles was closed before the plastic deformation could occur. Hence the second method of generation is more relevant for concrete and rock mechanics since in these cases this is the actual process, where the micro-cracks first closes then the elastic and plastic deformation occurs [Martin, 1993]. The first method, the circumference method is of great use when investigating the elastic deformations since here the particles are in contact. Thus creating the scenario for granular particles, In this thesis however the circumference method was used in order to create a solid specimen. For future use this add-on should be used in order such that each particle simulates an actual grain. The results found with both of these methods follows the results found in the laboratory test for the crushing load. But the incremental increase of force when the load is applied on the specimen was not able to be simulated. It is believed that the software is having difficulties to simulate brittle material due to the small deformations and the large loads.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-87755 |
Date | January 2021 |
Creators | Bashiry, Ronni |
Publisher | Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.2213 seconds