Return to search

A Low Jitter Analog Circuit for Precisely Correcting Timing Skews in Time Interleaved Analog-to-Digital Converters

Time-interleaved analog-to-digital converters are an attractive architecture for achieving a high speed, high resolution ADC in a power efficient manner. However, due to process and manufacturing variations, timing skews occur between the sampling clocks of the sub ADCs within the TI-ADC. These timing skews compromise the spurious free dynamic range of the converter. In addition, jitter on the sampling clocks, degrades the signal-to-noise ratio of the TI-ADC. Therefore, in order to maintain an acceptable spurious free dynamic range and signal to noise ratio, it is necessary to correct the timing skews while adding minimal jitter.

Two analog-based architectures for correcting timing skews were investigated, with one being selected for implementation. The selected architecture and additional test circuitry were designed and fabricated in a 0.18??m CMOS process and tested using a 125 MSPS 16 bit ADC. The circuit achieves a correction precision on the order of 10???s of femtoseconds for timing skews as large as approximately 180 picoseconds, while adding less than 200 femtoseconds of rms jitter.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OWTU.10012/8053
Date22 November 2013
CreatorsBray, Adam
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeThesis or Dissertation

Page generated in 0.0016 seconds