Master of Science / As parts in any device age, something inevitably breaks. When dealing with a broken metallic part, one can either replace it or repair it. Repairing is generally preferred so long as it is not too costly. Unfortunately, repairing a component is often more expensive due to the material being difficult to work with or the geometry being too intricate to fix. Additive manufacturing, commonly known as 3D printing, allows precise placement of material to build a part and has allowed the repair of complex parts. However, some materials are severely weakened using traditional additive manufacturing technologies, which melt small amounts of material and force it to cool in place quickly. To combat this, methods that do not require the material to melt could be used. Currently, these methods place a large amount of material at once, causing significant waste if the excess needs to be removed. Therefore, this work aims to create a small-scale device using a traditional milling machine. It was shown to be capable of placing small amounts of material while offering the advantage of not melting the metal. In the future, it could provide an avenue to repair previously unreachable.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/113576 |
Date | 30 January 2023 |
Creators | Gottwald, Ryan Brink |
Contributors | Materials Science and Engineering, Yu, Hang, Zuo, Lei, Suchicital, Carlos T. A. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Language | English |
Detected Language | English |
Type | Thesis |
Format | ETD, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0013 seconds