This study proposes various methods to harvest the mechanical energy present in railcar suspensions and railroad tracks to generate electricity that is suitable for onboard or trackside electronics, using electromagnetic generators. Compact electromagnetic energy harvesters that can be installed onboard railcars or wayside on railroad tracks are designed, fabricated, and tested. The designs integrate a mechanical motion rectifier (MMR) with embedded one-way clutches in the bevel gears in order to convert the bi-directional mechanical energy that commonly exists in the form of vibrations into a unidirectional rotation of the generator. The ball screw mechanism is configured such that it has reduced backlash and thus can more efficiently harvest energy from low-amplitude vibrations.
Two prototype harvesters are fabricated and tested extensively in the laboratory using a suspension dynamometer and in the field onboard a railcar and on a test track. A power management system with an energy storage circuit has also been developed for this onboard harvester. The laboratory evaluation indicate that the harvesters are capable of harvesting power with sufficient current and voltage for successfully powering light electronics or charging a low demand battery pack. The harvested power varies widely from a few to tens of Watts, depending on the resistive load across the harvester and the amplitude and frequency of the mechanical motion. The laboratory test results are verified through field testing. One harvester is tested onboard a freight railcar, placing it across the wedge suspension, to use the small amount of relative displacement at the wedge suspension to harvest energy. A second harvester is placed on a test track to use the vertical motion that occurs due to passing wheels for wayside energy harvesting. Both onboard and wayside tests confirm the laboratory test results in terms of the success of the design concept in providing low-power electrical power.
The harvester design is further integrated into a conventional railroad tie for ease of field installation and for improving the efficiency of harvesting the mechanical energy at the rail. The integrated design, referred to as the "smart tie," not only protects the energy harvester, the wiring harness, and supporting electronics from the maintenance-of-the-way equipment, but also positions the harvester in a mechanically advantageous position that can maximize the track-induced motion, and hence the harvested power. Although for testing purposes, the smart tie uses a modified composite tie, it can be integrated into other track tie arrangements that are used for revenue service track, including concrete and wooden ties.
A prototype smart tie is fabricated for laboratory testing, and the results nearly surpass the results obtained earlier from the wayside harvester. The smart tie is currently being considered for revenue service field testing over an extended length of time, potentially at a railroad mega site or similarly suitable location. / Doctor of Philosophy / This dissertation proposes three different electromagnetic energy harvesters for harvesting railroad track and railcar suspension vibration energy. The concept is similar to what you may have seen in self-powering flashlights that are often advertised in late-night TV commercials. You shake the flashlight vigorously, which moves an energy harvester devoice and, Voila, the light bulb comes on. The device design in this study uses the mechanical energy that is present in a vehicle or at a railroad track to harvest the mechanical energy that is naturally present in the form of electrical energy, which can then be used for powering electronic devices and sensors of various kinds. Such sensors and electronics would help with improving the operational efficiency of railroads.
The energy harvesters can be installed onboard a railcar or at the track. In either case, the movement of the train creates a small amount of vibration energy that is turned into electrical power. When onboard a train the power can be used for sensors, GPS, and similar devices to allow the operator to better monitor the condition and location of the train. Note that most railcars, especially the freight railcars, do not have any onboard electrical power. Similarly, the energy harvester can be installed at the track to convert the small amount of up and down motion that happens with the passing of each wheel into energy that could be used for integration of sensors that make the track "smarter." This means that the sensors can potentially alert the engineers who are responsible for monitoring the track of an existing or impending problem with the track. Both the railcar and track integration of the energy harvester that is designed, fabricated, and tested during this study are exciting concepts that can improve the rail industry in the U.S.
This document includes the details of designing efficient energy harvesters, specifically for rail applications. A prototype of the energy harvester is fabricated and tested extensively in the lab and in the field, albeit to a more limited extent. The test results were quite successful, which is why I am telling you about them! Both the laboratory and field test results show that the device holds significant promise for rail applications.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/111265 |
Date | 22 January 2020 |
Creators | Pan, Yu |
Contributors | Mechanical Engineering, Zuo, Lei, Ahmadian, Mehdi, Parker, Robert G., Furukawa, Tomonari, Ha, Dong S. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Dissertation |
Format | ETD, application/pdf, application/pdf |
Rights | This item is protected by copyright and/or related rights. Some uses of this item may be deemed fair and permitted by law even without permission from the rights holder(s), or the rights holder(s) may have licensed the work for use under certain conditions. For other uses you need to obtain permission from the rights holder(s). |
Page generated in 0.0104 seconds