The McTronX research group at the North-West University is currently researching self-sensing techniques for Active Magnetic Bearings (AMB). The research is part of an ongoing effort to expand the knowledge base on AMBs in the School of Electrical, Electronic and Computer Engineering to support industries that make use of the technology. The aim of this project is to develop an integrated co-processor based power electronic drive with the emphasis placed on the ability of the co-processor to execute AMB self-sensing algorithms.
The two primary techniques for implementing self-sensing in AMBs are state estimation and modulation. This research focuses on hardware development to facilitate the implementation of the modulation method. Self-sensing algorithms require concurrent processing power and speed that are well suited to an architecture that combines a digital signal processor (DSP) and a field programmable gate array (FPGA). A comprehensive review of various power amplifier topologies shows that the pulse width modulation (PWM) switching amplifier is best suited for controlling the voltage and current required to drive the AMB coils. Combining DSPs and power electronics to form an integrated co-processor based power electronic drive requires detail attention to aspects of PCB design, including signal integrity and grounding.
A conceptual design is conducted and forms part of the process of compiling a subsystem development specification for the integrated drive, in conjunction with the McTronX Research Group. Component selection criteria, trade-off studies and various circuit simulations serve as the basis for this essential phase of the project. The conceptual design and development specification determines the architecture, functionality and interfaces of the integrated drive. Conceptual designs for the power amplifier, digital controller, electronic supply and mechanical layout of the integrated drive is provided.
A detail design is performed for the power amplifier, digital controller and electronic supply. Issues such as component selection, power supply requirements, thermal design, interfacing of the various circuit elements and PCB design are covered in detail. The output of the detail design is a complete set of circuit diagrams for the integrated controller.
The integrated drive is interfaced with existing AMB hardware and facilitates the successful implementation of two self-sensing techniques. The hardware performance of the integrated coprocessor based power electronic drive is evaluated by means of measurements taken from this experimental self-sensing setup. The co-processor performance is evaluated in terms of resource usage and execution time and performs satisfactorily in this regard.
The integrated co-processor based power electronic drive provided sufficient resources, processing speed and flexibility to accommodate a variety of self-sensing algorithms thus contributing to the research currently underway in the field of AMBs by the McTronX research group at the North-West University. / Thesis (M.Ing. (Electrical Engineering))--North-West University, Potchefstroom Campus, 2009.
| Identifer | oai:union.ndltd.org:NWUBOLOKA1/oai:dspace.nwu.ac.za:10394/3723 |
| Date | January 2008 |
| Creators | Hudson, Robert Dearn |
| Publisher | North-West University |
| Source Sets | North-West University |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0021 seconds