<p>The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:</p><ol><li>Ground source heat pump for heating and cooling</li><li>District heating and absorption cooling</li><li>District heating and low temperate surface water cooling</li></ol><p>Energy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO<sub>2</sub> annually. The differences between the alternatives were smaller concerning the operation costs. The ground source heat pump alternative had smaller reductions of carbon dioxide than the other two alternatives with district heating.</p><p>An alternative heating and cooling system can also lead to alternative energy use. The choice is between electrical or heat energy. A weighting can be done to evaluate the energy use for heating on basis of how much energy is needed in order to generate the energy the end user buys. A 2.5 factor for electrical energy entails the alternative with district heating and low temperate surface water cooling gets the lowest heating and cooling energy in comparison.</p><p>An inventory of the lighting was also done. The company has already an energy effective lighting but yet another saving of 2 MWh can be done annually without replacement of armatures.</p><p>Finally, the operation time of the compressor was calculated with a mean value of 11 hours per day. The compressor delivers pressure air to machines and tools. There can be a great demand for pressure air in the workshop but the operation time can also be an indication of leakage in the air net.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:kau-6042 |
| Date | January 2010 |
| Creators | Forsberg, Åsa |
| Publisher | Karlstad University, Faculty of Technology and Science |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.002 seconds