Return to search

Independent Operation of Parallel Three-phase Converters for Motor Drive Applications

A motor drive consisting of two parallel voltage-sourced converters was developed and
implemented. A parallel converter arrangement allows the system to be constructed in a
modular fashion to gain economies of scale and redundancy. The converters are connected
to common ac- and dc-buses without isolation and are controlled without inter-converter
communication or a master/slave arrangement. The system was simulated and the results
validated against an experimental setup. Both steady-state and dynamic load sharing
were achieved through the use of drooped PI speed regulators. PI controllers were used
to regulate the quadrature currents provided by each converter. Circulating 0-sequence
current was regulated using P controllers. A linearized state-space model of the system
was developed and an eigenvalue analysis was performed, showing system stability. Speed
steps in simulation and in the laboratory demonstrated good response. The loss of one
converter’s gating was emulated. The system continued to operate, showing an advantage
of system redundancy.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/18295
Date18 January 2010
CreatorsFingas, William Daniel
ContributorsLehn, Peter W.
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
Languageen_ca
Detected LanguageEnglish
TypeThesis

Page generated in 0.002 seconds