Made available in DSpace on 2014-12-17T15:01:37Z (GMT). No. of bitstreams: 1
LeocadiaTCB.pdf: 1362259 bytes, checksum: bc8ee74506666e98deeef9007c502ac8 (MD5)
Previous issue date: 2006-05-19 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / Textile industry deals with a high diversity of processes and generation of wastewaters with a high content of pollutant material. Before being disposed of in water bodies, a pre-treatment of the effluent is carried out, which is sometimes ineffective. In order to be properly treated, physical and chemical properties of the effluent must be known, as well as the pollutant agents that might be present in it. This has turned out to be a great problem in the textile industry, for there is a variety of processes and the pollutant load is very
diversified. The characterization of the effluent allows the identification of most critical points and, as a consequence, the most appropriate treatment procedure to be employed, may be chosen. This study presents the results obtained after characterizing the effluent of a textile industry that comprises knitting, dyeing and apparel sections, processing mainly polyester/cotton articles. In this work, twenty samples of the effluent were collected, and related to the changes in
production. From the results, a statistical evaluation was applied, determined in function of the rate of flow. The following properties and pollutants agents were quantitatively analysed: temperature; pH; sulfides; chlorine; alcalinity; chlorides; cianides; phenols; color; COD (Chemical Oxygen Demand); TOC (Total Organic Carbon); oil and grease; total, fixed and volatile solids; dissolved, fixed and volatile solids; suspended, fixed and volatile solids; setteable solids and heavy metals such as cadmium, copper, lead, chromium, tin, iron, zinc and nickel. Analyses were carried out according to ABNT NBR 13402 norm, based upon Standard Methods for the Examination of Water and Wastewater. As a consequence, a global treatment proposal is presented, involving clean production practices as contaminant load reducer, followed by conventional (biological) treatment / A ind?stria t?xtil caracteriza-se pela diversidade de processos utilizados e gera??o de altos volumes de efluentes com alta carga poluidora. O efluente recebe um pr?-tratamento, muitas
vezes insatisfat?rio e ? lan?ado no corpo d ?gua. Para que possa receber um tratamento, ? necess?rio conhecer as propriedades f?sicas e qu?micas do efluente, bem como os agentes poluentes presentes no mesmo. Isto tem sido um grande problema na ind?stria t?xtil, pois os processos utilizados s?o muitos e a carga poluente bastante diversificada. A caracteriza??o do efluente permite identificar os pontos mais cr?ticos e conseq?entemente a a??o mais adequada no seu tratamento. O presente estudo apresenta os resultados obtidos na caracteriza??o de um efluente de ind?stria t?xtil, composta de malharia, tinturaria e confec??o que processa principalmente poli?ster/algod?o. Neste estudo foram realizadas 20 coletas do efluente, procurando associ?-las ?s mudan?as na produ??o, e a partir destes resultados aplicou-se uma avalia??o estat?stica, determinada em fun??o da vaz?o. Analisou-se quantitativamente as seguintes propriedades e agentes poluentes: temperatura, pH, sulfetos, cloro, alcalinidade, cloretos, cianetos, fen?is, cor, DQO (demanda qu?mica de oxig?nio), COT (carbono org?nico
total), ?leos e graxas, s?lidos totais, fixos e vol?teis, s?lidos dissolvidos, fixos e vol?teis, s?lidos suspensos, fixos e vol?teis, s?lidos sediment?veis e metais pesados como c?dmio, cobre, chumbo, cromo, estanho, ferro, zinco e n?quel. As an?lises foram realizadas de acordo com a norma ABNT
NBR 13402 sendo as mesmas baseadas no Standard Methods for the Examination of Water and Wastewater . Como conseq??ncia, apresenta-se uma proposta de tratamento global, envolvendo pr?ticas de produ??o limpa, como redutor da carga contaminante, seguidas do
tratamento convencional (biol?gico)
| Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/15866 |
| Date | 19 May 2006 |
| Creators | Beltrame, Leoc?dia Terezinha Cordeiro |
| Contributors | CPF:05641284491, http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783215D9, Silva, Valdinete Lins da, CPF:23524472400, http://lattes.cnpq.br/6965029890444626, Ladchumananandasivam, Rasiah, CPF:18222161415, http://lattes.cnpq.br/8553209522282182, Barros Neto, Eduardo Lins de, CPF:59545844434, http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4798645D3, Dantas, Tereza Neuma de Castro, Dantas Neto, Afonso Avelino |
| Publisher | Universidade Federal do Rio Grande do Norte, Programa de P?s-Gradua??o em Engenharia Qu?mica, UFRN, BR, Pesquisa e Desenvolvimento de Tecnologias Regionais |
| Source Sets | IBICT Brazilian ETDs |
| Language | Portuguese |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
| Format | application/pdf |
| Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds